Jump to content
SAU Community

Recommended Posts

Morning.

r33 gtst series 1

splitfire coils

stock injectors

7's gapped at 1 or .9

This morning when i turned my car on i had terrible idle, i currently have a very mild miss on warm idle and always have, but this morning, and only this morning (so far) it just decided to idle shit, the motor was rocking and you could feel it through the car, i wouldn't say it was a crippling rocking, but enough to shake the motor and car.

The rocking was a perfectly sequential fast paced rock, as apposed to an occasional light miss from the motor. it felt like it was missing every revolution and about 6-8 times a second on startup idle (1200-1500rpm) it almost felt as if you had washed the engine and a bit of water went into the valley, and you get that miss that it does.

I should note that the idle was starting to smooth out as the car was on, but turned it off before it was fully gone.

My guess is an injector is blocked? or a spark plug fault? but its weird that this didnt happen yesterday when i used the car. Could this be in relation to my usual very mild occasional miss that i get normally?

Ive tried to give as much info as possible, if i've missed anything let me know.

Cheers guise

Link to comment
https://www.sau.com.au/forums/topic/389746-terrible-start-up-idle-rocking/
Share on other sites

check your plugs first man... i'm guessing that they are gone.

did you drive it at all? and if so did the problem rectify itself after a while?

I just reversed the car across the road, and i think the idle was starting to smooth out after about 30 secs to a minute, but didnt want to leave it running, since i thought it might be leaning out on a cylinder or something.

I will check the plugs.

i went out just now and the idle was fine, but id still like to know what happened, as i assume this can happen again.

Edited by ClutchBurndout-:(

Those misses you say you get when warm are not misses, they are lean pops. They don't happen on idle due to the richness that the car runs to warm the engine up. If you drive your car when its in its cold state and switch it off soon after, the unburnt fuel can quickly foul old plugs. Ive had mornings where my car will start and misfire its face off. Change the plugs and bam its back to normal. My car was running rich all over the place so after I fixed that it didn't happen.

Those misses you say you get when warm are not misses, they are lean pops. They don't happen on idle due to the richness that the car runs to warm the engine up. If you drive your car when its in its cold state and switch it off soon after, the unburnt fuel can quickly foul old plugs. Ive had mornings where my car will start and misfire its face off. Change the plugs and bam its back to normal. My car was running rich all over the place so after I fixed that it didn't happen.

lean pops you say? not on idle? this ONLY happens on idle, how do i fix the lean pops on idle? checking for fouled plugs? what plugs will solve this?

i was very low on fuel yesterday, but filled up yesterday and drove another 30mins home on new fuel, that wouldnt affect it this morning?

so which plugs to use, some are saying BCPR7ES and some are saying BKR6ES?

  • 4 months later...

7's are too cold for your application. Go down a heat range of 6. If the plugs can't get warm enough to it's operating temperature it can't burn off the excess carbon on the plug to clean itself and foul. Assuming your still running stock injectors your not putting out big power and 7's are too cold.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I should note too as I have all 4 wheel speed inputs to the emtron I now have the emtron controlling the attessa solenoid for 4wd/traction and launch control strategies. 
    • It works quite well with the adjustibility within each of the programs of the turbolamik. Essentially p1 is drive and lockup comes on like a normal driver.  But in program 7 I have customised it to not request the lockup clutch to engage until something like 6500/7 when slip was the lowest. 
    • Yep, I like that. The tags are only on the first post of a thread and we don't get huge numbers of new threads. Also, I plan to add some more report types and we could have a member report type like 'review tags' then members could flag if they thought a topic wasn't tagged correctly.  No way man, I dig the input. Thanks! 
    • It's a valid thought. There's not exactly that functionality already (when creating a thread) - that's where the OP can use/create any tag they want. We'd have to come up with a way for the user to request their tags get reviewed or something. Otherwise the mods would have to review every new post's tags (for those that have them, anyway). There's kind of that functionality already exists to some extent, post facto of starting the thread, where the OP or any other user could report the post to admins, and request that tags get reviewed. We could do this already, and any user could already have made such a request. To make it a part of the forum proper, it would require an initial and an ongoing education programme, so that people know that it's a thing. OP based tagging/request for review would also require at least some (probably most) of the user base to be told that it's a thing they can do. Both of these things probably wouldn't spread too far and/or get used very much. If it was the standard approach on a lot of different sites, then it might do, because people would be used to it. Prank's approach to this differs from my original thought, by leaning into tagging. Which is fine - it's possibly better than what I originally suggested. In fact, I just went to the R32 GTR wiring diagram thread and added tags, including "Library". That's probably a good way to use tags and the idea of a library. We just have to drag together an (organised!) index of threads or posts that have that tag. I have yet to do any of my own follow up by pursuing worthy threads and posts and reporting/marking/tagging them for the library, such as the @Sydneykid stuff I was talking about, and possibly any amount of @Lithium 's and others' posts. At least if I tag them Library, we'll have a start.   Back to @Wazmond's idea as it relates to @PranK's, we might have some sort of a list of tags that are already used to scrape for this library. I'm not entirely sure how that would be presented or used, particularly if it got long. But it's yet another idea!   cheers
    • Just a thought, but instead of restricting, is it possible to do like an "up for review" kind of thing? Where say someone who's not an admin/mod tags, it would require approval for it to actually tag? User posts with a 'tag' > Admin/Mod Reviews > Approves tag > Tag now exists kinda thing? Just came across this thread so Im not too sure if Im straying off topic or not but forgive me if i am...
×
×
  • Create New...