Jump to content
SAU Community

Recommended Posts

Okay,

So my current diff is on its way out - the usual whines, clunks and noises that come from a diff which has done 170,000 kms.

So in saying that, I'm on the lookout for a replacement...

1st choice (cheapest) would be to overhaul & shim up the diff I have in the car -

advantages: fixes the clunks noises etc., locks better that currently, cheap

disadvantages: its a V-LSD. They have average performance at best. Shimming accelerates wear on the crown wheel from what I had read and overall is just a bandaid for a bullet wound.

2nd choice would be to purchase a new or used Nismo/OS Giken/Cusco etc. -

advantages: Nismo item is comfortable (almost) as OEM, locks consistently, considerably newer item overall

disadvantages: costly, if 2nd hand unknown condition etc.

3rd choice would be to install a diff from another car i.e. S15 torsen diff -

advantages: locks consistently (except for in zero traction environment), cheap

disadvantages: zero traction = zero lock (driveways etc.), unknown condition

What is your thoughts? Which path should I go down considering that cost, effectiveness, performance and condition of the item all need to be considered...

Cheers,

David

Link to comment
https://www.sau.com.au/forums/topic/390011-differential-choices-for-r32-gtst/
Share on other sites

I'm currently in the process of doing #3. Is turning out to be more expensive than I expected though. I initially bought a diff advertised as R34 manual LSD (which are supposed to be 4.11 and torsen). But it was a 4.11 VLSD. So either the specs on R34s were more flexible than I thought, or I got sold an R33 unit. Then I bought an S15 torsen centre. That seems fine, but the ratio is Silvia tall. So we built Frankendiff. Moved the 4.11 gears to the torsen centre and then put the lot into my R32 housing. Wasn't easy to get the CW&P set up correctly, so now it's at a diff shop getting set up. So there's $300+ for purchased diffs and a couple hundred coming up to pay the diff shop. Still worth it though I think.

Sorry forgot to add that...

Car is pretty much 95% street, 5% track.

2-way is pretty much out of the question. There is just no need for it.

GTSBoy:

Yeh it seems the cheapest way to go about it. Best of both worlds IMO (cheap & still locks well for the way I use my car). But like you said, its a big ordeal to get it all setup. Unfortunately you had the added expense of the extra diff :yucky:

Also, problem is finding a 1.5 Nismo diff.

They don't pop up very often.

I have also been told the half shafts (AKA stub shafts) are different from OEM and you need the correct halfshafts supplied with teh diff from Nismo. These also rarely pop up correct for my car i.e. 5X1 bolt pattern etc.

Think the issue is more David doesn't see buying a new one as value for money, $1400 is a shitload, see lots of 2nd hand 2 ways for ~500 that cost nothing to get the clutches machined and set up with non aggressive preload but he wants a 1.5 which almost never come up second hand, hence the question, buy a torsen for not much? buy a 2 way that is slightly more aggressive than he wants or pay way too much for a new 1.5?

Imo a nismo 2 way with mild preload would be fine as I've had one and it drove like stock, but I don't think david wants to compromise there. Which means either lots of money for new 1.5 or a torsen that will be better than stock but not as good as a 1.5 way.

Guess it comes down to 2 metrics, cost and performance, what is more important? If it is cost go torsen, if it is performance go a 1.5 way. Though the 2nd hand 2 way is screaming as a fantastic middle ground to me.

http://www.nengun.com/nismo/gt-lsd-pro

1.5 and 2 way listed there. Email and ask them, as im pretty sure the Nismo kit comes with new 1/2 shafts.

I picked up a Nismo 2 way 2nd hand for only $600 in apparently immaculate condition, i then sent it to a local diff expert and got him to rotate it to 1.5 way as it will see a lot of street work and occasional track, its yet to be driven on but condition looked mint inside, yes the half shafts are different to stock.

Just a quick note in regards to the half shafts, the Nismo LSD's are supplied with OEM Nissan half-shafts BUT, they are equal length (short IIRC) as opposed to the 1xlong/1xshort which is standard.

I picked up a Nismo 2 way 2nd hand for only $600 in apparently immaculate condition, i then sent it to a local diff expert and got him to rotate it to 1.5 way as it will see a lot of street work and occasional track, its yet to be driven on but condition looked mint inside, yes the half shafts are different to stock.

I bought my 2 way for $900 which was just run in (basically brand new). Came with new 1/2 shafts when I got it also.

I've noticed that you can indeed rotate the housings between 1,1.5,2 way on some diffs, didn't know you could do it with the nismos, that is interesting as hell!

Pretty sure it is just Nismo and Cusco that you can do it with, unsure if there are others but its an awesome option. The Nismo Pro (What i have) you need to dismantle it and rotate it, but i believe the Pro TT is better in design? Either way i was happy with the purchase!!

I bought my 2 way for $900 which was just run in (basically brand new). Came with new 1/2 shafts when I got it also.

That's a good buy!!! Its pretty hard to find R34GTT bits so i was stoked when i got my diff!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Which are almost all nonsense. Ignore. Obviously enough, if it is not a porous block, then any such thing is a waste of time. External block surface? Would be a waste of time, if the block was actually porous. It would need to go on the inside, which is inaccessible, and even if the block was open deck so that that area was acessible, it would be unlikely to work. But seeing as this is all nonsense, stop worrying about it.   If the coolant is coming from the side of the block it is 10:1 odds that it is either a welch plug, or it is coming from the head gasket. Maybe from one of the coolant lines feeding the turbo, or even the heater. Liquids that leak from up high can travel sideways along casting surfaces or pipes, etc on the engine before finding a spot from which to drop.
    • Yeah rust is sadly also a bit of an issue on my car. Doubt there is many cars out there that actually have no rust in those aeas. The strut towers look fine but some of the surounding metal sheets show a bit of brown cancer peeking out from in between. I hope I can make do with external remedies and won't have to rip open the whole front end anytime soon. It looks somewhat minor compared to some shit I have seen online. I have worked on a few cars but I expect the RB26 to be my first 'engine out' job at some point.
    • Welcome Jan, It's very likely that you are in over your head. You'll just have to learn to swim hard and fast! These old rust buckets have more ways to bankrupt us than almost any other car. But hopefully there's nothing wrong that ruins the whole show! We can help a fair bit. There's plenty here who've been fixing these things for >25 years. cheers
    • Hi all. First off, thanks for reading my post. So end of last season I put the car away knowing I was leaking at least two fluids. One of them being rear turbo's oil. I went to my car recently that is waiting in a garage to take a peek with my boroscope to try and see if I can narrow down the souce of oil before taking it out of storage. What I found is not so great I think. The rear turbo is (probably) leaking from the oil drain. The hose and it's clamps are probably the original ones, so most likely just worn out or loose. However I spotted a line of rust going straight down from the turbo oil feed, as if water leaked out of there at some point. Also explains the red liquid that was dripping from my front subframe, which I initially thought was power steering. I can even see coolant drops hanging off the side of the oil pan as well. After a quick hit on the web I found a select few discussions about porous engine blocks. My question is if the pics of the turbo oil feed and the left hand side of the block (imgur link below) looks like it could be exactly that to you. Maybe someone in the community has seen it before and knows what it looks like. If it actually is a porously leaking block, has anyone attempted at fixing it with simple methods like putting a sealer in the cooling system and using something like jb weld on the block surface, or will it just leak in 2 weeks again? I could not find any detailed info or pictures on this topic. If I need a new engine, tell me softly. https://imgur.com/a/knVvmZ8
    • Hey all. I'm 23 and from Germany, September last year I bought a mildly modded 1995 GTR Vspec. Looks great and was fun so far, but I already have a list of issues of various severity that I need to take care of, potentially growing longer the closer I look. I just hope I'm not in over my head, I really want to keep the car and work towards it becoming great. I hope y'all will help me out in getting there, I am positive I will need help sooner rather than later to figure out how to proceed. greetings, some pics of the car I posted to imgur. https://imgur.com/a/StKkabz
×
×
  • Create New...