Jump to content
SAU Community

Canberra - >Jindabyne -> Charlottes Pass

Sinista32

By Sinista32,
in Australian Capital Territory

 Share

Recommended Posts

Scooby Veteran

Scooby

Posted
Posted

Sorry I cant make it either Richo.

Got a new Brake Master Cylinder put on today. A bigger, better, larger unit to suit the Brembo's. BM57. (Bigger than 1")

Instead of the BM50 for the Sumitomos (1")

Now I have braking issues - Again :(

Booked in again Wednesday to get it looked at.

Sin

Stocker should work fine with the Brembos. But then so should BM57, what's the issue?

Sinista32 Grand Master

Sinista32

Posted
  • Author
Posted

The stocker became spongy when I had the New rotors and Brembo calipers put on. Pedders put the rear calipers on the wrong side therefore the bleed valve was opposite to where it shouldve been and air got stuck. :(. Took it back twice and they didnt work it out. Took it around the corner to ACT brakes and within 1 minute they told me the problem. So they put them on the right sides and up the right way bled, and all good.

Because I put the Bremo's on I bought the BM57 to suit. Today ACT Brakes put it on and I am back to spongy.

When the ehgine isnt on the brake peddel is hard. Turn the engine on and they go instantly spongy.So doesnt appear to be air trapped in system.

So anyway - back to ACT brakes on Wednesday. If they cant resolve within the day I'll get them to put the BM50 on. As it turned out to be very good.

I thought I'd get better stopping with the match of Brembo calipers and the BM57 like the Vspec I and II.

Scooby Veteran

Scooby

Posted
Posted (edited)

The bigger BM57 will give you slightly shorter pedal travel and a harder pedal so while the stocker will decrease harness and increase travel it shouldn't be excessive or spongy. The movement when you turn the engine on is it 'sponginess' or 'travel' because the booster is getting vacuum?

Edited by Scooby
Sinista32 Grand Master

Sinista32

Posted
  • Author
Posted

The booster appears to get vacuum as it should but the sponginess is more than should be.

There should be a point where the pressure increases and then goes fairly hard as the brakes are applied

I dont get to the hard bit and the first half is soft like there is no pressure.

Any ideas ??

The other thing that annoys me is that every brake shop discounts bleeding the ABS without reason - Why is that?

It connects directly to the BMC, it has the capacity to trap air, it's higher than the calipers and higher than anything else in the brake system (except the BMC which is pretty much at the same level), it has bleed valves on top of it !

I'm not a brake specialist BUT i am mechanicaly minded and logical.

StinkyPoo Mentor

StinkyPoo

Posted
Posted

The booster appears to get vacuum as it should but the sponginess is more than should be.

There should be a point where the pressure increases and then goes fairly hard as the brakes are applied

I dont get to the hard bit and the first half is soft like there is no pressure.

Any ideas ??

The other thing that annoys me is that every brake shop discounts bleeding the ABS without reason - Why is that?

It connects directly to the BMC, it has the capacity to trap air, it's higher than the calipers and higher than anything else in the brake system (except the BMC which is pretty much at the same level), it has bleed valves on top of it !

I'm not a brake specialist BUT i am mechanicaly minded and logical.

Faulty valve or torn diaphragm?

  • 1 month later...
Sinista32 Grand Master

Sinista32

Posted
  • Author
Posted

So how many of you keen to go for a drive this comming weekend ??

Thinking of grabbing a big breaky in Cooma (1hr away) then maybe a short stop at Jindy for photo op and then lunch at Charlottes private parts.

Maybe even cold drinks when we get back

Following weekend is Wheels @ old parly house.

StinkyPoo Mentor

StinkyPoo

Posted
Posted

I won't do it this weekend, doing Motorkhana on Sunday.

But I was close to driving out that way last weekend (Canberra long weekend) until the R32 engine died while out and about. Anyway that got me wondering if any of the roads up there had been closed from the recent rain? A majority of the fun roads were closed and we found out for good reason.

S T A R 3 3 Veteran

S T A R 3 3

Posted
Posted

Ahh man would be keen! But I'm getting my St pats day celebrations on.. come on St pat's day on a Saturday! Its like a lunar eclipse...

But next few weekends ill be available. Ill also be getting new rims which will need a photo shoot.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      The FD RX7 is the best looking 90's JDM car

      By PranK · Posted

      This lady loved her FD for 25 years!  https://www.topspeed.com/80-year-old-woman-donates-fd-rx-7-mazda/ My brother in law. He's nice enough to let me drive it whenever. He'll likely not see this, but I'll try: @r-is-for-fun got any pics?
    • Rezz
      Anyone know what this front bar is for series 1 R33??

      By Rezz · Posted

      Just something I found searching for more info on Emotion R, apparently the ECR33 Skyline GTS25t was either originally black, or there were two of them, the black one being the original demo car, then building a white one which was part of the 1997-onwards (to at least 2008!) Cockpit Tatebayashi Tokyo Auto Salon booth demo cars. It appears that Emotion R closed down in 2008 and was declared bankrupt in 2010: http://bank-db.com/hasan/208365. Scan of a magazine with the black R33 from 1996: Wayback machine archived page from May, 2000: https://web.archive.org/web/20000529061027/http://www.emotion-r.co.jp/skyline.html Option magazine with a few photos from the Cockpit Tatebayashi booth at the Auto Salon from various years: 2002: http://www.jdm-option.com/photo/index.php?action=item&category_id=154&image_id=3507 2003: http://www.jdm-option.com/photo/index.php?action=item&category_id=137&image_id=3033 2005: http://www.jdm-option.com/photo/index.php?action=item&category_id=116&image_id=1831 In 2008 Cusco website mentions that the Cockpit Tatebayashi ECR33 was displayed at that year's Tokyo Auto Salon: https://www.cusco.co.jp/event/2008/12/post_735.html As of 2021 it appears that the ECR33 demo car ended up being exported to Florida, USA: https://rmcmiami.com/inventory/1996-nissan-skyline-r33-cockpit-tatebayashi-demo-car-big-te06-turbo-endless-brakes-lsd-450hp/ And finally here's Google streetview of the Emorion R garage in 2023 which is amazingly not only still there, but the showroom is still full of various parts in stock and funishings, etc.: https://maps.app.goo.gl/ttyEAZdZLyzermyT9 Apologies for nerding out a bit. I used to love doing this 20 years ago on SAU and got a bit nostalgic for a moment... 😅
    • Rezz
      High pedals r32

      By Rezz · Posted

      Try fabricating something like this and install it under the pedals? Not sure if it's legal or not....
    • GTSBoy
      Nismo Super Coppermix Twin and R33 GTR transmission replacement

      By GTSBoy · Posted

      Even though I have some pretty good (brand) ratchet ringies, I avoid using them to break open tight bolts. A broken ratchet is very annoying.
    • r32-25t
      Nismo Super Coppermix Twin and R33 GTR transmission replacement

      By r32-25t · Posted

      I just use a stubby ratcheting ring spanner 
×
×
  • Create New...