Jump to content
SAU Community

Recommended Posts

Ok guys hurts me to do this but its time to sell my beloved skyline. I have owned it since i imported it from japan 3 years ago. i am willing to sell or swap it for only a v8/v6 turbo manuel ford or holden. so send me your offers.

Atm it is defected and will be cleared TOMMOROW so will have a current rwc to put in your name. Has 10 month rego still on it and RWC included.

Really cold aircon yes aircon.

All new belts and pumps.

serviced every 500kms.

gearbox and engine oils are nylon.

absolutely nothing wrong with this car. immaculate interior and exterior. ALL (i mean everything) engine work and tune was done by sam at dr drift car made 228kw 1bar of boost is capable of more.

Nissan skyline r32 rb20det with 140.000kms (will double check)

Engine rb20det Garret 2876r turbo .86 rear housing.

Full braided turbo lines from pirtek.

Turbosmart boost tee set to 1 bar.

Trust return flow frount mount intercooler.

4 inch intake with 3a racing pod filter.

Full 3 inch exhaust twin pipes. Now connon.

R32 Gtr 440cc injectors.

Z32 air flow metre.

Dr drift resistor pack,.

Dr drift re-map.

Bosch 040 fuel pump.

Drift oil catch can.

Excedy heavy duty clutch.

Oil cooler with re-location kit.

Asi Aluminum radiator.

Hicas lock bar.

2way cusco diff.

Gktech steering spacer.

Gktech tie rod spacers.

drift black catch can

professionally guards rolled.

full respray by vu at dt panels (3k +), finished 2 months ago.

6 month old dba slotted rotors all around 6 month old pads all around

genuine r32 gtr front bar and lip.

extender hbk wheel studs all around.

project mu wheel nuts.

black tint all around.

genuine oem coilpacks from nissan x6. will never missfire.

genuine coilpack loom from just jap.

front and rear strut brace.

sound deadening has been dry iced away.

vivagarage full set car mats blue and black checkered.

Suspension.

Full bc racing coilovers.

Adjustable cusco camber arms.

Adjustable holfords front castor arms.

adjustable isc rear toe arms.

adjustable isc traction arms.

just jap subframe collars.

27mm adjustable front whiteline sway bar 22mm adjustable rear whiteline sway bar

Interior.

Blitz Oil temp, boost, water temp, oil pressure gauges.

Full r33 gtr interior. Besides door trims.

Fire extinguisher.

Drift handbrake button.

nardi style steering wheel.

nismo black gear knob.

grey dash matt.

jvc cd player with front and rear speakers also tweeters at the front. and amp.

viper remote start alarm.

Wheels.

genuine bee r's silver genuine stickers

17x9+22 fronts federal 215/40/17

18x9.5+22 rears federal 215/40/18

extras: twin pipe exhausts 3 different wings all painted. stock airbox. harness tyres. gk tech bash plate stock r32 rear seats.

Probably have missed some info so ill add it when i think of it. located in vic hoppers crossing call or sms 0430078630 if your serious.

SWAPS FOR A V8 or V6 TURBO MANUEL FORD OR HOLDEN

OR $15000 CASH.

WILL ALSO CASH YOUR WAY FOR A MORE VALUE OF A CAR.

picsonthe12th379.jpg

picsonthe12th368.jpg

picsonthe12th326.jpg

picsonthe12th324.jpg

GOPR0488.jpg

GOPR0487.jpg

GOPR0484.jpg

GOPR0479.jpg

GOPR0467.jpg

CopyofIMG_0538.jpg

2011-12-30172157.jpg

2011-12-30172214-1.jpg

296165_152213164865328_100002299355712_288795_1079806_n.jpg

2012-01-29115208.jpg

2012-01-29115200.jpg

2012-01-29115127.jpg

silviaandskyline004-1.jpg

silviaandskyline001-1.jpg

forsale11112222007.jpg

forsale11112222006.jpg

picsonthe12th322.jpg

picsonthe12th320.jpg

picsonthe12th327.jpg

2011-02-20141817.jpg

silviaandskyline014-1.jpg

andrewpicsoffiphone007.jpg

P071109_1936.jpg

Link to comment
https://www.sau.com.au/forums/topic/390169-my-r32-skylinerego-and-valid-rwc/
Share on other sites

update:

went for alignment at tyre right altona very good guys there very recommended.

car is perfect in all alignment settings

running more camber on the rear -2. looks better

less castor as was scraping the front bar sometimes over bumps.

car sits a little higher now.

Still for sale guys lots of time waters and joy riders.

I will not take any more people for rides only if you have a good look at the car like it and have a deposit..

Still has another 10 days for the rwc to be put in your name so get in quick.

  • 1 month later...

Bump decided to try and all this again. so pm meer or sms me your offer.

Only swaps for a stock 2005+ Manuel v8 Holden or ford.

New goodies on the car :

handbrake Cusco leaver.

Customised number plates.

Front speakers tweeters.

Gtr wing and boot.

Still same price. $14000...$12500 Without rims and tyres.....$12000 without rims and gauges.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...