Jump to content
SAU Community

Recommended Posts

hi

i was wondering if someone could send me in the right direction, i took my car to a track day and it was over heating according to my defi gauges, oil hit 125 degrees and water 105 degrees.

i dont think thats very good for the engine . ive been looking into getting a new alloy radiator and a oil cooler so i can enjoy my track days without over heating.

but unsure if i need twin or triple core radiator as ive been told sometimes to big is no good.

and with the oil cooler not sure how many rows are necessarily needed.

atm my car 98 r34 gt-t has a turn flow blitz intercooler , 3inch exhaust , manual boost controller nothing else mechanical done.

hope u can help me.

Link to comment
https://www.sau.com.au/forums/topic/390170-over-heating/
Share on other sites

Those temperatures are just OK. As in, you can run it that hot but you really don't want it to get much hotter, and you'd prefer it to be cooler. A new triple core radiator will definitely cool better than an old single core, so that will probably help. If you look after the water cooling, then you won't need the oil cooler to be too big. Something that fits behind the brake duct is usually good enough unless you have a monster engine. But before spending money on all this stuff, it might be worth wondering if you just need a new water pump (might have lost some vane to corrosion), or might be better off looking at making sure your air flow through the radiator area only goes through the rad, not around it, etc etc. cheers

Link to comment
https://www.sau.com.au/forums/topic/390170-over-heating/#findComment-6214214
Share on other sites

id say an oil cooler would be essential for track days... there is another thread going about oil coolers / thermostats etc..... Ive never tracked my 33 (i have an oil cooler and relocated oil filter) i barely see temps above 70 degrees.. even after long drives in 30 degree heat with 80% + humidity...

an oil cooler is pretty simple to put in - maybe consider it next time you do any oil change..

Edited by defari
Link to comment
https://www.sau.com.au/forums/topic/390170-over-heating/#findComment-6214230
Share on other sites

I reckon just do the usually checks before u go buyin any expensive aftermarket parts

1 check thermostate operation

2 flush entire system

3 change coolant

4 bleed the system and get all the air out of it

This will pretty much only cost u ur time

then go for your water pump/radiators etc

Link to comment
https://www.sau.com.au/forums/topic/390170-over-heating/#findComment-6214301
Share on other sites

suggest that a vented bonnet might help get the hot air out, do you have a mate you could borrow one off and test on the track?

nope dontno any1 with one. maybe do the track without a bonnet ?

Those temperatures are just OK. As in, you can run it that hot but you really don't want it to get much hotter, and you'd prefer it to be cooler. A new triple core radiator will definitely cool better than an old single core, so that will probably help. If you look after the water cooling, then you won't need the oil cooler to be too big. Something that fits behind the brake duct is usually good enough unless you have a monster engine. But before spending money on all this stuff, it might be worth wondering if you just need a new water pump (might have lost some vane to corrosion), or might be better off looking at making sure your air flow through the radiator area only goes through the rad, not around it, etc etc. cheers

i got my water pump changed 20,000kms ago should be ok i guess ... but i do have cheap kmart coolant in it tho lol so that could be an issue i guess ..

any reason why you suggest triple core radiator ?

id say an oil cooler would be essential for track days... there is another thread going about oil coolers / thermostats etc..... Ive never tracked my 33 (i have an oil cooler and relocated oil filter) i barely see temps above 70 degrees.. even after long drives in 30 degree heat with 80% + humidity...

an oil cooler is pretty simple to put in - maybe consider it next time you do any oil change..

ah just got the car serviced ... yea ive been told they are basicly necessary for track use. just general driving get my car up to about 80-90 degrees oil temp.

Koyo radiator plus anything like a 19 row oil cooler will solve all your problems.

would you recommend cooling pro ? or go with a better brand like koyo n blitz.. wouldnt happen to know if twin or triple core works better with the stock water pump ?

Link to comment
https://www.sau.com.au/forums/topic/390170-over-heating/#findComment-6214318
Share on other sites

I reckon just do the usually checks before u go buyin any expensive aftermarket parts

1 check thermostate operation

2 flush entire system

3 change coolant

4 bleed the system and get all the air out of it

This will pretty much only cost u ur time

then go for your water pump/radiators etc

This is good advice, do the easy stuff first.

Considering you have few mods, I wouldn't blame the radiator straight away.

Link to comment
https://www.sau.com.au/forums/topic/390170-over-heating/#findComment-6214327
Share on other sites

any reason why you suggest triple core radiator ?

Only because the China spec aluminium rad I put in years ago was triple core, cheap and works perfectly. It was clear that it provided much much more cooling than the original rad (the only problem of the original rad was a cracked end tank, the core was in good condition).

Cheap coolant doesn't make any difference to cooling performance. Only to how gracefully the coolant ages (old coolant becomes more and more acidic with time) and hence how well it control corrosion.

Link to comment
https://www.sau.com.au/forums/topic/390170-over-heating/#findComment-6214330
Share on other sites

I reckon just do the usually checks before u go buyin any expensive aftermarket parts

1 check thermostate operation

2 flush entire system

3 change coolant

4 bleed the system and get all the air out of it

This will pretty much only cost u ur time

then go for your water pump/radiators etc

i had an issue when i took my car to a mechanic that told me they specialized in skylines after they done my timing belt they didnt bleed the coolant through and i wasnt running on much coolant at all took it back the next day n they tryed to tell me my radiator was leaking then finaly told me they stuffed up after 4hrs of waiting around.

ill look into that they might have cut more corners fixing it up

Link to comment
https://www.sau.com.au/forums/topic/390170-over-heating/#findComment-6214331
Share on other sites

Only because the China spec aluminium rad I put in years ago was triple core, cheap and works perfectly. It was clear that it provided much much more cooling than the original rad (the only problem of the original rad was a cracked end tank, the core was in good condition).

Cheap coolant doesn't make any difference to cooling performance. Only to how gracefully the coolant ages (old coolant becomes more and more acidic with time) and hence how well it control corrosion.

ohk, didnt no that about coolant lol just last longer the better it is

Link to comment
https://www.sau.com.au/forums/topic/390170-over-heating/#findComment-6214340
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I should note too as I have all 4 wheel speed inputs to the emtron I now have the emtron controlling the attessa solenoid for 4wd/traction and launch control strategies. 
    • It works quite well with the adjustibility within each of the programs of the turbolamik. Essentially p1 is drive and lockup comes on like a normal driver.  But in program 7 I have customised it to not request the lockup clutch to engage until something like 6500/7 when slip was the lowest. 
    • Yep, I like that. The tags are only on the first post of a thread and we don't get huge numbers of new threads. Also, I plan to add some more report types and we could have a member report type like 'review tags' then members could flag if they thought a topic wasn't tagged correctly.  No way man, I dig the input. Thanks! 
    • It's a valid thought. There's not exactly that functionality already (when creating a thread) - that's where the OP can use/create any tag they want. We'd have to come up with a way for the user to request their tags get reviewed or something. Otherwise the mods would have to review every new post's tags (for those that have them, anyway). There's kind of that functionality already exists to some extent, post facto of starting the thread, where the OP or any other user could report the post to admins, and request that tags get reviewed. We could do this already, and any user could already have made such a request. To make it a part of the forum proper, it would require an initial and an ongoing education programme, so that people know that it's a thing. OP based tagging/request for review would also require at least some (probably most) of the user base to be told that it's a thing they can do. Both of these things probably wouldn't spread too far and/or get used very much. If it was the standard approach on a lot of different sites, then it might do, because people would be used to it. Prank's approach to this differs from my original thought, by leaning into tagging. Which is fine - it's possibly better than what I originally suggested. In fact, I just went to the R32 GTR wiring diagram thread and added tags, including "Library". That's probably a good way to use tags and the idea of a library. We just have to drag together an (organised!) index of threads or posts that have that tag. I have yet to do any of my own follow up by pursuing worthy threads and posts and reporting/marking/tagging them for the library, such as the @Sydneykid stuff I was talking about, and possibly any amount of @Lithium 's and others' posts. At least if I tag them Library, we'll have a start.   Back to @Wazmond's idea as it relates to @PranK's, we might have some sort of a list of tags that are already used to scrape for this library. I'm not entirely sure how that would be presented or used, particularly if it got long. But it's yet another idea!   cheers
    • Just a thought, but instead of restricting, is it possible to do like an "up for review" kind of thing? Where say someone who's not an admin/mod tags, it would require approval for it to actually tag? User posts with a 'tag' > Admin/Mod Reviews > Approves tag > Tag now exists kinda thing? Just came across this thread so Im not too sure if Im straying off topic or not but forgive me if i am...
×
×
  • Create New...