Jump to content
SAU Community

Recommended Posts

does anyone know or have experience with power enterprise injectors , they do an 850cc injector which is $160each,

would this be a good thing for a E85 setup upto 340kw and would they idle nicely and be no drama fitment on stock rail???

would really appreaciate feedback before i make decisions.. ;not sure bout xspurt injectors if i need to stuff round with rail...

old style injector which is pretty lazy but will work...

Just to add some info since I first started this thread - I've now got the injectors and test fitted them. The pic shows what we had to do to make them fit - was only about 0.5mm skimmed off the adapters. All i've got to do now is get the car tuned...

IMG_20120603_120135.jpg

Good work. The 1000's seem easier to fit then the 2000's due to there length.

With 2000's i still had to open the rail .5mm and then get the correct o-ring to match. Then i needed larger o-rings for the lower end that fits into the port. I couldnt use the stock rubber as u have.

Good work. The 1000's seem easier to fit then the 2000's due to there length.

With 2000's i still had to open the rail .5mm and then get the correct o-ring to match. Then i needed larger o-rings for the lower end that fits into the port. I couldnt use the stock rubber as u have.

there are specific bolt in ones avail, i just did a 34 vspec with bosch 2000's bolt in no mods. i know efi hardware have them ready to go excellent price too.

so is that 65mm or 48mm all up...

strange they have a cap on them..looks like they are 11mm when you take the cap off...

Wonder if you put them in like that, but then the spray nozzle would be in the airstream.. :unsure:

the long nozzle ones are direct fit evo X.

The caps on the others allow you to order specific spray patterns for different applications... 10,20 or 30 degree.

does anyone know or have experience with power enterprise injectors , they do an 850cc injector which is $160each,

would this be a good thing for a E85 setup upto 340kw and would they idle nicely and be no drama fitment on stock rail???

would really appreaciate feedback before i make decisions.. ;not sure bout xspurt injectors if i need to stuff round with rail...

YEP! Thats what i run mate no dramas what so ever :thumbsup:

dont have to explain my setup to you lol :merli:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I have had the r3c in for years now, maybe close to 7 years and it has never missed a beat, anyone can drive it. Super easy to drive around town, the hotter it gets does get a little hard but it holds the power easy as 
    • Shit thing to find eh? I guess the big issue is that whatever "fix" you do now, it might slow the rust down but won't fix it. I just wanted to add that in no way is fixing sheet metal in 3 dimensions the place to start with welding....that is a pro only job because its too hard to work out where things should be, let alone doing a clean enough job that it can look OK and still be strong too.  I needed to get a new rear quarter panel on the GTR and it took a pro weeks to get the old one off cleanly, new one on in the right place and looking somewhat like it should have with most of the previous connecting panels in place. Gluing a couple of bits of metal together with a welder in the garage is doable, but that is totally different to doing panel  replacement
    • This seems to be a very popular swap since all the turbo skyline prices went through the roof! I'll let someone more familiar chime in, but I understand that yes you probably want to swap the loom in to swap out the auto TCM stuff. You should not assume everything just plugs in either, you need to check at least the ECU wiring diagram for any differences at the plug at the left headlight and probably the ones near the ECU that join the dash loom too  
    • hows it fellas, my first post here which seems crazy cos half the forums i read are like the same age as me haha. to make a long story short ive got an r34 sedan (rb25de neo auto) which im swapping to a s0/s1? rb25det, r33 big box and nismo gt pro lsd. i have the motor and gearbox all bolted up outside the car, old motor and trans out. i bought the motor with stock ecu and loom, do i switch over to that? or will it be easier to get a r34 manual ecu and keep the loom if thats even possible.  also engine mounts look different, anything else thats different or incompatible? cheers, hope this all makes sense Paddy
    • att.4QNbuJlz_gNZPFBGFqeEvxSUHXkGt7z40V59MrtXTPg.mp4    
×
×
  • Create New...