Jump to content
SAU Community

Recommended Posts

Is this the successor to the terrano II? it looks like a small suv like the dualis, have nissan sorted out these issues with the juke?

Nissan is recalling 28,294 2011 Juke models to fix a sensor bracket that may separate from an air inlet tube. The vehicle may go into "fail safe" model and the warning light will turn on. If a driver continues to operate the vehicle, it may stall during idling and in rare cases may not restart.Nissan said its testing over the last year in the U.S. showed that the vehicle would not stall without warning at higher than idling speeds. But Nissan said it has seen recent incidents in foreign countries of vehicles stalling without first going into "fail safe" mode. In those cases, the vehicles couldn't be restarted. Dealers will replace the air inlet tube if necessary. The vehicles were built between April 2010 and May 2011.

source: lemonautos.com

^^yep i hear you there. i could almost talk the other half into one with an auto though

she doesnt like the stags or cubes but wants something styled like this. they would have to be high 20'S or above wouldn't they??

cost though- think about it. whilst I understand what you are trying to do have a look at the Z11 market. these things are still sitting in lots at $15k and from my understanding are a bit hard to move.

I can't see a $20-25K juke going anywhere fast myself. if the mainstream guys (and the ones we have in common) get them then its going to be a minefield trying to find one thats straight and not wet.

seems someone has a different idea in brissy. I saw a early toyota Will V putting around today with a trade plate on it . I think gearing was driving it.

Alphard ....... what happened ?

Find me an article and I'll submit it!

cost though- think about it. whilst I understand what you are trying to do have a look at the Z11 market. these things are still sitting in lots at $15k and from my understanding are a bit hard to move.

I can't see a $20-25K juke going anywhere fast myself. if the mainstream guys (and the ones we have in common) get them then its going to be a minefield trying to find one thats straight and not wet.

seems someone has a different idea in brissy. I saw a early toyota Will V putting around today with a trade plate on it . I think gearing was driving it.

Yeah but you're old and you don't get that young people like Jukes :P

I've got someone in Sydney prepared to drop folding on the test car and pay for all the testing too. Like most newer cars, they may not be a good bet now, but they will be in a couple of years.

Find me an article and I'll submit it!

Yeah but you're old and you don't get that young people like Jukes :P

I must have stopped aging then :rolleyes:

...if this is anything to go by...

http://cars.about.com/od/nissan/fr/11_juke_preview.htm

Well, it's a start!

And I will laugh heartily if Gearing is seriously considering the Will V...

he already has a mitsi M there.. (fuel version of the MIEV) so if would not surprise me.

if you have someone ready to commit that sort of money then by all means. I still do not see it going anywhere myself.

most of the guys I know have moved away from cars and gone to motorhomes,bikes and US iron.

and yes I am old :P

The missus would kill for a turbo manual in black... has to be a good grade and prefferably with leather.

... I don't want to be seen in a focus or golf :-( (comiing home from the pub).

pm comming your way Kris.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • who can tell me what this is and why my car talks to me? i think it's hilarious. it's on my r34 right above the drivers-side storage compartment. the characters under the wrench say "inspection". every 10 or 20 startups, a voice starts talking in japanese from some speaker in this area below the dashboard. it says a few sentences then shuts off. different from the ETC card reader voice that happens every time i start the car. I've never found the speaker, i've never been able to catch the voice and translate what it says, and i've never found a forum thread that tells me how to reset the warnings. the holes in between the symbols are NOT buttons you can press to reset the warnings. anyone else have this? has the demon lord from Hereditary infected my car?!
    • Would you ever vent this bonnet or will it be unnecessary?
    • Happy new years folks! Wishing you all a successful year of money pit ownership!  So the subframe bushes are out....   Ok, who else has done that job before??  What a C U Next Tuesday of a job that is!  Be glad to not do that again in a hurry! I think I explored every option available to chop the middle section of the bushes out, most of them unsuccessfully! I tried a holesaw, die grinder, normal drill bit, air chisel, etc, etc. The true success happened by accident when I'd decided to try a step drill I spotted on the bench on the way passed.  See, there are benefits to never cleaning up after yourself! It RIPPED through so so much better than the drill bit. It has to be the skinniest one available so its small enough to fit between the inner tube and outer casing but it made easy work of it.  First one i hammered the shit out of... New method- 20250102_185506.mp4   I did the other 5 in less time than I fluffed around with the first one. With the first couple I used the cut off saw (sawsall as the yanks love to call them) to cut a break in the outer casings. Even with that they're still a prick to hammer or air chisel out.  The last few i just went rambo with the air chisel without cutting them. I over cut one of the early ones so will hit the with the mig to fill the cut then sand it off smooth.  The carnage left over-   I've also been "nesting" ie, cleaning up my babies nursery,  ie cleaning the f**king pig sty of a shed. I've got that much shit laying around it's as cluttered as my head!  Getting things put away, in boxes, on shelves, hanging off walls, all to get some working space back again.  Hopefully that keeps me motivated....
    • AFAIK does the base map for Haltech even have the 4D compensation enabled? It's been a while but when I looked at it I remember it was actually using pure TPS as one load signal and MAP for another. Seemed workable but not ideal by any stretch. A lot of people have "make the event-itis" which leads to stuff like this happening.
    • https://www.youtube.com/watch?v=qHhWelSBppY
×
×
  • Create New...