Jump to content
SAU Community

Recommended Posts

Hey guys!

Went out and got 235/40/18 all round for my 18x9,5j et26..

Looked like this:

11825608_1125171084217480_85036708787422

But I went out and got another set of wheels :yes:

OEM R34 GTR wheels to be exact...

What would you recommend for those....was leaning toward 235/40 but would be a shame if I could pull of a wider tyre size and didnt go for it.

Dont want to roll the guards or anything. Car has coilovers and will be dropped the lowest it can go with these wheels :)

Cheers

  • 1 month later...

What look are you after? Since you didn't bother to read this thread no state that.

Just looking for function as its a track car mainly. All I want to know is whats the maximum I can go with standard guards. Will consider a little guard roll if I have too

Just looking for function as its a track car mainly. All I want to know is whats the maximum I can go with standard guards. Will consider a little guard roll if I have too

youl have to be a bit more specific mate, if youv got a 17" wheel... to get an offset for you.. wel need to know what width wheel also.. and tyre size will also come into factor for clearance.. if the standard wheel is 17x7.5 and around +40 then youl want to bring the offset down to around +20 for that wheel to get a decent flush fitment.. just adjust for your width and tyres :)

Anyone have an idea if 17x7 et40 will fit a 25gtt with 215/45/17 all round?

Yes it will fit but like junkie said it's skinnier than the GTT stockies (17x7.5 ET40) so what's the point?

Stockies can be had for around $200 for a set, I've got one for the street and another for track, they work a treat with 20mm spacers too.

Downsides: heavy, and won't clear big brakes.

No worries, thanks guys. Only wondering since I got offered a set of nice white volks with toyo tyres that have 90% tred on them all round for $300 and the tyres on mine are toast.

Ah ok, good price but. Make sure you check tyre load capacity first to make sure it's not too low for the heavy gtt.
  • Like 1
  • 1 month later...

577a60c30666b_ImageUploadedBySAUCommunit

577a61d894418_ImageUploadedBySAUCommunit

577a61f1eaa34_ImageUploadedBySAUCommunit

One for the list, 4 door

18x9.5 +26, 245/40 all round

Fronts I had to roll and pull the guards, rear I have just rolled the lip a little. Camber is 1.5 front and 1 rear

Nismo Stune suspension so it's not overly low, firm but not hard Spring rates

Good clearance on suspension on full lock etc

  • Like 3
  • 1 month later...

I have a '98 R34 GT-T. 

I had some Rota Grid 18x9.5 +35 and 18x10.5 +35 with 235/40 tires. 

Fitment looked good but the fronts actually scrubbed on the inside suspension when turning too far. The 235's on the 10.5's were also a bit TOO stretched for my taste.

So today I just installed some Work Emotion 11R 18x9.5 +20's all around and kept the 235/40 tires. The fitment looks perfectly flush with the rear fenders but sticks out considerably on the front. VERY aggressive but it DOES fit with stock fenders and doesn't scrub. I like it. I don't intend to roll. I'm running stock GT-R shocks/struts.

Pics:

C225EEB7-3802-4046-AD97-10790DA7A23C_zps

81050FCF-1B5C-40F3-94CB-92EF96C008E1_zps

97E5D908-5A53-46C5-A43C-5771137A6314_zps

Edited by YoshiFD3S

Hi Everyone, hopefully not going off topic here

Been searching for a few hours regarding SSR wheel disk types (specifically SSR SP3) and can't find out if a super low disk or even normal disk will clear the GTT front brakes, people run hyper disc to clear brembos on their Evo's and Gtr's but I'd like as much dish as possible for my wheel width.

Hey guys, 

Have had a read around, however just wanted clarification. Am looking at ordering some Rota Grids for my R34 GTT.

Have settled on 18 x 8.5 + 30 all around. From what I've picked up online, that should be fit easily no scrubbing etc, correct? I'm basing this off how GTR sized (18 x 9 + 30) are supposed to be a great fit on a GTT.

Cheers.  

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was £307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • As above, you did refill the coolant and burp the system before running it again didn't you?
×
×
  • Create New...