Jump to content
SAU Community

Recommended Posts

Hello, congrats.

With my R34's - first mods i'd normally do are coil packs, air filter, exhaust and front mount. But everyones different and it obviously comes down to $ and preference.

In Melbourne, although I've never used them - I have heard 'Chasers' is good.

Full service, oils (engine,gearbox,diff), fluids (coolant, brakes,powersteering, clutch), , air filter (not a pod please) correct plugs, wheel alignment, then get it run up on a dyno to see if the fuel and shizzles is OK.

Work out what you want the car for, then work out your budget, then talk again to tuner and ask questions, be carefull, alot of dodge guys out there just want your money in their pocket.

Read all the threads in here, dont forget brakes and handling, this should be one of the first upgrades, a well set up car will be better than a car with more power but no brake or susspension upgrades.

Dont buy cheap tyres .

Only replace things that need replacing, dont buy things that will need to be upgraded again later if the power bug bites..

Which coil packs do u recommend ?

Is your spark failing, why do you need new coil packs, are you running over 25 psi.

If there not failing dont replace them for the sake of it !!!

Hey guys just purchased my first skyline! R34 four door gtt, was just wondering what my first mods should be and any checks I should do? Any info and decent people to deal with Melbourne would be great!

congrats mate! ive really got a soft spot for a good looking 34 4 door.

as said before, have a full service done, make sure the car is in perfect running order BEFORE you go modding it. otherwise its a massive backwards step. there are probably PLENTY of reputable mechanics in your area, have a look in the victoria section of the forum. to perform a full service, you dont necessarily need to take it to a performance garage for a full service, they can sometimes be very over priced.

Yeh well I pick it up next friday or my birthday, gonna do all the oils, spark plugs and filters my self, then take it in for a full check over, then do suspension, exhaust and fmic.... Then slowly take it from there

Is your spark failing, why do you need new coil packs, are you running over 25 psi.

If there not failing dont replace them for the sake of it !!!

Your right, I should have been clearer. Check them first.

Personally, when I buy a car - if necessary I just do them the first time I do the plugs as we are talking about packs which are potentially 14 years old.

But again - it comes down to preference and condition, the packs in there may actually be fine anyway, or may have already been changed.

Edited by iwanta34gtr

1) Do a service.

2) Wheels (Good ones with sticky rubber)

3) Set of coilovers and dump it to the weeds (A decent set; TEIN, Cusco, Bilstein etc.)

4) 3" exhaust from the turbo back (Stainless)

:thumbsup:

Edited by Hank Scorpio

Full service, oils (engine,gearbox,diff), fluids (coolant, brakes,powersteering, clutch), , air filter (not a pod please) correct plugs, wheel alignment, then get it run up on a dyno to see if the fuel and shizzles is OK.

Work out what you want the car for, then work out your budget, then talk again to tuner and ask questions, be carefull, alot of dodge guys out there just want your money in their pocket.

Read all the threads in here, dont forget brakes and handling, this should be one of the first upgrades, a well set up car will be better than a car with more power but no brake or susspension upgrades.

Dont buy cheap tyres .

Only replace things that need replacing, dont buy things that will need to be upgraded again later if the power bug bites..

I totally disagree depending on circumstances. If the suspension hasnt been thrashed,shocks are still good and you want a comfortable ride instead of a bumpy go-kart then there is no problem with doing the usual mods and running 12 psi on stock suspension.

But yeah as said, Make sure you change every filter and fluid first and if you want to run a pod, make sure you buy a heat shield for it. Also if you want a buttload of induction noise from your pod buy a HKS Super Power Flow ;) lol.

Also post pics when you get it!

4 door <3!! :D

I totally disagree depending on circumstances. If the suspension hasnt been thrashed,shocks are still good and you want a comfortable ride instead of a bumpy go-kart then there is no problem with doing the usual mods and running 12 psi on stock suspension.

Considering the facts though the car was made between what? 1998 and 2001? This means that if it has stocko suspension still it is 11 - 14 years old. O.E shocks last (as a general rule of thumb) about 100,000kms so a car that has only done 10k a year on average is still going to have a 'decent' amount of kms on it.

Time to upgrade that suspension I reckon!

When I had an R34 GT-T a couple of years ago it had done ~130,000kms and the shocks were still 'acceptable', after dropped in some HKS coilovers though the car transformed itself!

Obviously all cars are different but due to the age of the vehicle and the fact that the suspension is still factory nine times out of ten I would look at replacing.

Considering the facts though the car was made between what? 1998 and 2001? This means that if it has stocko suspension still it is 11 - 14 years old. O.E shocks last (as a general rule of thumb) about 100,000kms so a car that has only done 10k a year on average is still going to have a 'decent' amount of kms on it.

Time to upgrade that suspension I reckon!

When I had an R34 GT-T a couple of years ago it had done ~130,000kms and the shocks were still 'acceptable', after dropped in some HKS coilovers though the car transformed itself!

Obviously all cars are different but due to the age of the vehicle and the fact that the suspension is still factory nine times out of ten I would look at replacing.

I helped a mate purchase a 1998 R34 GT-T Coupe with 148k on the clock and the suspension was great and i drove it on 14Psi. He only got Teins to lower it. Also my first 4 door 33 was a 93 model with 128Ks on it and even then the suspension was good enough to take 14psi. All im saying is "if" the suspension is still good, then in my opinion (permitting OP would rather a more comfortable ride) its ok to do the usual power mods as is.

No idea as to what else you should do other than a service, just got myself the same thing too.

I guess the vic thread, can help you alot, there's a post listing all the shops and there's some feedback on them too. Have learnt abit by slowly browsing through. Enjoy your ride when you get it :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Damn it, I was at work last night, and stayed in a room there during the storm with the car outside, but undercover, I just went downstairs and well....there was a large steel locker that has come from some place last night, it wasn't anywhere I could see yesterday, and yeap, it landed on the fraking car....of course it did..... LOL So, I'll need to take it back for paint and panel, luckily it was only the boot that took the hit, so it could have been worse Serves me right for staying at work and getting on the cans with some of the boys
    • Yeah, really happy with how it all turned out As for aftermarket lip, nah, I'm not really a fan for practically reasons on a street car that gets driven everywhere  I did have the full lower kit on my 2015 STI, but found the front lip scrapped alot, even at stock 4x4ish ride height As the NC sits now, with the lowest point of the car at 110mm, so just legal, some steep driveways and steep speed humps will still "just" scrap those little plastic OEM air dam thingies on the undertray just before the front wheels
    • Here's one I help build and tuned a decade ago, Garrett  GTX3071R Gen 1, T3 twin scroll 0.83 rear housing. Went from larger 272 cams down to smaller Tomei Poncams to help with the low end. S13 non VCT motor. Car was purpose built for the track, hence low down was the focus. Note the actual dyno chart shows lower boost, however the EBC and boost gauge showed 1.9Bar (Ignore the torque, I was young and didn't know how to set derived torque)  
    • I’m doing some side developments on SR20det S13 engines, its one my hobby cars used it to compare flow capacity of some smaller size wheels. SR20det is one of another JDM legendary engines I'm sure there are plenty of SR enthusiasts on this forum, I will share results some common turbo configurations here. a quick run down of what the car is: Wide body 180sx Type X with black top engine (blue). It has: Stock bottom end Haltech 1500 ECU 5-0 motorsports trigger kit Kelford SR20DET Beehive Spring with Titanium Retainers Kelford Cams SR20DET S13 188-B 268/272 Cams G25-660 Turbocharger in T2 .64 rear housing internally gated ARP Head studs MLS head gasket 1000CC ID injectors Walbro 450L Fuel pump Front mount cooler kit JJR’s 3 inches turbo back exhaust (its too short for the 180sx it had to be extended) Pump 98 fuel Hub Dyno tune So far made 270rwkws at 22psi full boost by 4500RPM. Engine is very knock limited hence a pretty bad looking top end. From previous experiences it seems like SR20dets are happier with bigger size turbine, some thing like a GT30 would make way better top end, but on same time response is lost. It won't be a problem with S15 VCT engines. I'll be testing alternative turbine housing, turbine wheel and possibly dump pipe options for extra flow to resolve the problem and of course E85 would resolve all the issues.            
    • Awesome writeup and details. Thanks for sharing the story so far. I can relate to parts of it with my previous car and some of the issues I had to deal with.
×
×
  • Create New...