Jump to content
SAU Community

Recommended Posts

cleaning out the garage got the following to get rid of

all items in good condition

local pickup in doncaster east melb preferred but can post at buyers expense

1 - r33 gtr spoiler in black with carbon end caps $250

2 - r33 gtr bee r carbon fibre wing (brand new never fitted just taken out of the packaging) $250

3 - r33 gtr front grill in black no badge $50

4 - r34 gtr dump pipes $150

5 - 320mm momo race wheel $50

6 - 350mm momo race wheel $50

7 - boss kit to suit r33 gtr and momo,nardi etc $50

8 - r34 gtt carbon fibre top secret bonnet $350 (paid 1500)

9 - rays wheel nuts in black (never used got given for free with a new set of wheels but i like my purple wheel nuts) $150

this last package item is an eoi only!!!

r34 gtt interior in carbon.

fully custom made at a very large cost

all pieces include

triple guage cluster

air vents

ac controls

radio surround

gear surround

ash tray

the entire centre console including lid

will only sell for $500 and your standard pieces (local buyers only)

i come on here rarely so just shoot me a text on 0433005569 thanks

Link to comment
https://www.sau.com.au/forums/topic/391065-garage-cleanout-heaps-of-stuff/
Share on other sites

1 - r33 gtr spoiler in black with carbon end caps $250,

do the end caps have GTR embossed into them? would sell/swap the end caps only

2 - r33 gtr bee r carbon fibre wing (brand new never fitted just taken out of the packaging) $250

pics of the BeeR wing, replaces std GTR blade?

Edited by 75coupe

hay buddy

not willing to seperate end caps at this stage as i dont have the standard ones to put back in and some one is interested in it already

bee r spoiler is the one that replace the blade but is higher

go onto sikjets for sale post and look at the pic of the wing on his car

mines exactly the same but never been fitted to a car, its still in the box in the packaging it came in

only selling as ive changed setups from circuit to drag and this wing is not suitable to me

its fkn awesome though lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a late reply here as me and my wife have been really busy with new born twins. I finally got these issues fixed and it was something really stupid that caused all of this 🤦‍♂️... After alot of mucking around with trying to figure out what is causing these issues, I back probed one of the R35 coils on the power 12v supply, with the engine running it got 25v! And I thought, hang on..., this isn't normal. Measured my battery with the engine running to check for over charge from the alternator and it wasn't that. So then I dissconnected the R35 PRP coil harness and backprobed the power supply on the engine loom where the ignition coil harness connects, with the key on ignition (engine off) it measured 30v! So then I had to trace where that high voltage was coming from and it lead me to the brown relay "ECM & IGN coil relay" inside the cabin next to the ECU on the passanger wall. This relay feeds power to the ECM and ignition coils. Tried swapping it with another same relay. nah still 30v.. coming from the 2 green/white wires in the brown relay. So then I set my multi meter to the beep continuity mode and probed every fuse on the fuse box inside the cabin to try and find this high voltage power source. Wasn't any of the fuses inside the cabin. Then probed all the fuses in the engine bay and BAM, got my power source that was a 10AMP fuse called "ENG CONT". Pulled the fuse out, and what do you know... it was blown. 🤦‍♂️  So then I quickly replaced it with a new 10AMP fuse, started the car and yeah haha [insert extreme face palm]... The RPM blimping thing went away, car idles smoothly now like what it was before. I swear! I checked all my fuses with my test light twice before I created this forum thread. I think, maybe because one side of that faulty 10A fuse lit up on my test light, I must have thought it was still ok and not blown. But now I know to have both sides light up on the test light when checking fuses... I hate diagnosing electricals.... I'd take mechanical problems over electrical problems any day🤣. Drove the car around my suburb with the engine up to operating temp and it runs fine like before. However, I notice that my fuel pressure is still at 49psi. So I'm thinking this must be normal for my system as I've upgraded the stock fuel pump to a Walbro 255L/h with a constant 12v mod.  But anyway, I'm just glad to have my daily back on the road! Thanks everyone for the replies on this thread, all sorted now! One thing I want to ask you tuner guys, my base fuel pressure on the haltech main settings are set to 43.5psi from default (my tuner must have not checked the fuel pressure maybe when tuning my car?). Do I set it to what it actually is idling on at 49psi? Or just leave it ("if it aint broke, don't fix it/leave it")?  
    • The max they would go for me is 50.
    • That cannot have been a fun set of drilling. The stock "baffle" looks identical to rb26, I just cut fuel cell foam to fit the full length under the baffle.
    • I understand your sarcastic exasperation. But to be fair - the baffles do indeed fit OEM cam covers. They did omit to say that you need to do a bunch of stuff. But they do fit them.
×
×
  • Create New...