Jump to content
SAU Community

Recommended Posts

The 33 gtr is now rego'd and driving. Its a sweet ride but the tram tracking is very annoying.

I had the 285x30 18's on the gtst and the tracking was noticeable but not annoyingly so.

I fitted these same wheeels/tyres to the gtr and the tram tracking is bloody horrible. It will climb up and follow any small deviation in the road surface. I physically have to fight to keep it in a straight line. On a smooth ride its perfectly fine, I can let the wheel go and the car tracks true.

Is this inherent in the awd with fat tyres or is it possible my wheel alignment needs attention?

Any help appreciated.

Link to comment
https://www.sau.com.au/forums/topic/391090-gtr-tram-tracking/
Share on other sites

Isn't that usually a toe issue? More toe and it will change direction very readily, so nice for cornering, but have more of a tendency to tramline. I'm running zero toe at the front but I'm only running 255s, and its a good compromise for me. Do you know what your toe setting is now?

It could be just toe as Mr Stabby says, or it could be that some of the bushes in the front end of the GTR are a bit stuffed and allowing a bit of vagueness. When they're like that, the tyres will grab hold of a groove or feature in the road and that will twist the suspension until the bushes run out of give. If there's enough give to allow the wheel to turn far enough to start steering, then the car will follow. With bushes with less slop, the wheel doesn't get to turn far enough to follow the road feature, and you just feel a tug in the steering wheel rather than the whole car following.

It could be just toe as Mr Stabby says, or it could be that some of the bushes in the front end of the GTR are a bit stuffed and allowing a bit of vagueness. When they're like that, the tyres will grab hold of a groove or feature in the road and that will twist the suspension until the bushes run out of give. If there's enough give to allow the wheel to turn far enough to start steering, then the car will follow. With bushes with less slop, the wheel doesn't get to turn far enough to follow the road feature, and you just feel a tug in the steering wheel rather than the whole car following.

The bushing in general seems to be in good shape.

I am a bit suss of the wheel alignment so I'll start there. Even thought its tracking true on a flat road there may well be toe settings that need attention.

Thanks for your input blokes.

Isn't that usually a toe issue? More toe and it will change direction very readily, so nice for cornering, but have more of a tendency to tramline. I'm running zero toe at the front but I'm only running 255s, and its a good compromise for me. Do you know what your toe setting is now?

I had heaps of toe out in the front on my R34 , cornering was perfect with no tracking at all

the problem is if your GTST had more camber than your GTR then the tyres will have more inside wear and tending to have more load placed on the outside of the tyre ,

which will track heavily on undulating surfaces.

One way to find out is to reverse the front tyres , see what happens , if it continues its your bushings , my guess it will stop tracking !

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I know right. It baffled me. There's no way when the engine is off, key is in ignition, (coils are dissconnected aswell), also my sound system was dissconnected (I don't run any audio capacitors), battery reads 12.2v and with the 10amp fuse blown I was measuring 24 to 30v. The reading would move a bit from 30v to 24v which was weird. I took a pic of the multi meter reading 🤣: (This is a brand new single channel digital oscilloscope that also has a multi meter mode).   Before when the fuse was blown, I had one lead on the 12v supply (green/white wires) of that brown relay and the other lead on the negative battery terminal. When I turned the key on ignition (engine off), it would read 30v. Then when I removed that relay from it's plug and tried putting ignition on again, it would read 12v, but I think it's because it can't turn on the ecu now that I removed it. I asked Chatgpt and this is what it had to say:   Not sure if those theories would be possible but, any auto sparkies here? welcome to confirm. 🤷‍♂️  No idea, but if it happens again, atleast I know what type of issue it is, unlike last few months where I didn't know what was causing all my issues and I was just taking stabs in the dark to figure out what type of problem it was. If it does happen again I'm going to investigate futher and trace back the source even more and inspect more circuits. I drove it to work this morning and the car drove and boosted fine. Yeah I was thinking the same, so I've imported my back up saved map (which is the map that I saved when it got done tuning) back onto my haltech with the base fuel pressure set to 43.5psi.
    • Yeh nice, if your in melbourne could you recommend any exhaust shops in the east that do a good job?
    • Sorry yes, this is what im after Also, that jpjdm site appears to be offline
    • @Duncan Random side note, did the cops give you the driver/owners details of the taxi and then did Shannons give you a refund of the excess once you supplied those details?
    • Yeah to be clear I'm not naive, I'm sure all insurance companies are a bunch of arseholes who pay people bonusses based on the value of genuine claims they avoid....I just don't want to go back to one that has personally f**ked me multiple times in the past  
×
×
  • Create New...