Jump to content
SAU Community

Recommended Posts

Depends what parts you are getting.

Manifold $1400

Turbo $1900

Wastegate $600

Dump $500

Lines, fittings and gaskets $400

Intake $200

Tune $800

Labour $1000

Id say thats about right.

i recently paid:

  • Gt3582R with v band housing from sonic performance for $1350
  • Precision 48mm waste gate from the realstreetperformance in the USA for $350
  • Kinugawa braided lines from ebay, good quality (had them pressure tested to 300psi and no leaks) $70
  • gaskets were only $50 in total for manifold gaskets and oil drain gasket & t3 turbo gasket,
  • $1100 for custom turbo manifold made from 3mm stainless steam pipe,
  • $400 for dump and wastegate pipe to cat
  • $100 for intake and hot side cooler pipe.

Fudge you guys buy some expensive gates.. i got 2 for 500 bucks (Tial 38mm with all the springs)

I got my Borg warner s300sx 83/75 for $950 plus delivery from the states, but pretty sure GCG sells them (its not an EFR shitbox one before anyone jumps in)

Exhaust can get pricy depending on how big/type of metal/ and if u need a high flow cat, also need to plumb in the gate..

I did all my lines and fitting myself for my single conversion on my 26 and it wasnt 400 bucks, wasnt even 300 and thats with enough braided line and fittings to plumb in twin gates.. got my stuff from Pirtek

Just take the time to do as much as you can and save your self a couple of grand... all that stuff u wanna do is easy bar making a new dump

i got a twin scroll manifold that was from full race which was pretty pricy but the six boost ones are pretty cheap..

Edited by GTR_JOEY

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...