Jump to content
SAU Community

Honda Club day at Wakefield Anzac Day

Duncan

By Duncan,
in Events Archive

 Share

Recommended Posts

typerlc Apprentice

typerlc

Posted
Posted
yeah the civic was out there, pritty good for a stockie!

there was this crazy little white old civic with a turbo integra engine. Now that was interesting. It was hunting down a worked wrx with cheater tyres.

My civic went well ... but we ran out of brakes at one stage, and of course didn't bring any spares for the day. So we ran around Goulburn looking for pads. Supercheap didn't have any, but they had ones that were roughly the right size. So we bought those, and an angle grinder, and "made" them fit. :alien: At least we got back out on the track. :thumbsup:

The old EB2 Civic has IIRC, a T28 running 13psi boost. In a car weighing about 700kg, that means fast!!!!! At its last 1/4mile run at WSID, it got a 12.8.

I was lucky enough to have a drive on the day, and oh my god ... that much power was never meant to be put through the front wheels. Especially since he had just blown up the gearbox, and had replaced it with another but without LSD. It was scarrryyyy!!! And because of the short wheelbase, it is twitchy as all hell when braking hard. Pedal placement was a nightmare ... all offset to the left, and for me to reach the pedals comfortably, I had to sit disturbingly close to the wheel ... I guess not a problem for others, but I didn't start off feeling comfortable.

Unfortunately, the old civic trashed its diff, so was still at the track when we locked up ... waiting for the tow truck.

On another topic, was the green S14 yours Carlo, or a mate of yours? What happened to it?

Merli Grand Master

Merli

Posted
Posted
hey, at least you didn't blow your engine up first :thumbsup:

Now you know why I'm so worried about grenading my RB26 and won't track it until it's fully sorted for circuit work :)

Merli Grand Master

Merli

Posted
Posted
hey, I had a big sump with baffles. maybe it cant work from the box in the boot tho?

You obviously forgot to connect it up to the fuel tank... DUH!!!!!

n00bs :thumbsup:

fatz Grand Master

fatz

Posted
Posted

when a driver of a gtr gets excited they rev the engine to hard (8500-9000)

cause the engine is spinning so hard all the oild gets pumped to the top of the engine becasue the sump only holds 5 litre maybe 6 if you really top her up

constant over revving of the engine leeds to what we call the duncan syndrome (gtr engine go bye bye) due to a lack of oil in the sump which leads the pressure loss when the pic up starves

solutions are many

1 dont over rev the engine 100% of the time on the track

2 overfill your oil (not recomended)

3 oil cooler to increase capacity of oil in engine

4 instale sump baffels to stop the starvation

5 head restrictor

6 larger sump

we love you druncan

now that i have bagged him out something will probably happen o my engine (touch wood)

Merli Grand Master

Merli

Posted
Posted
sbs is when you have a gtr owner that is too scared to go to the race trace and sights sump bafels as an excuse

merli

lol

lol

lol

lolo

lol

blah blah blah :thumbsup:

Just you wait :) I need to reclaim the record back off Dundan at EC :D

What's it set at these days? :)

Merli Grand Master

Merli

Posted
Posted
you big girl merli

you comming saturday

I'm going to try and make it out in the morning...

I have a wedding starting at 3pm in Waitara (somewhere up north woop woop) so it's gonna be a loooooooooong day.

Merli Grand Master

Merli

Posted
Posted
but if there's no oil in the sump, how are baffles going to help.  I guess you mean there is still some, but without baffles it is distributed over the whole sump and hence the level is too low near the pickup?

It's a combination of not enough oil, and oil moving around the sump at high cornering loads. Nothing underneath the oil pickup left to squirt up into the head.

Baffles help keep some oil underneath the pickup, larger capacity sump helps overall oil reserves and cooling, oil cooler does the same thing, and most importantly, and oil gallery restrictor in the head restricts how much oil gets sent up into the head (too much in standard configuration) and leaves more oil in the sump.

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Borci88
      Borg Warner EFR Series Turbo's V 2.0

      By Borci88 · Posted

      Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • Chocolate Cheesecake.
      Infiniti Q60 Navigation Update

      By Chocolate Cheesecake. · Posted

      I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Luckily I didn't put in etch primer as I just found out it's not compatible with my body filler lol. Also just need to sand the panel anywhere between 150-400 grit so I'm in the clear there. It does say to not apply to soft old paint, I assume that means paint that is flaking, peeling,etc
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Yep will do, thanks for all the help.
    • itsforandres
      BCNR33 Blower Motor Resistor - Testing

      By itsforandres · Posted

      @dbm7 and @GTSBoy thank you both very much! will give that a shot!
×
×
  • Create New...