Jump to content
SAU Community

Recommended Posts

Disappointed that I missed out on the group buy. Does anyone have any idea where I can still get them or anybody else interested in another group buy?

Just sent Jesse an email as I also cleverly missed this buy.

Edited by gtrtech
  • Replies 478
  • Created
  • Last Reply

Top Posters In This Topic

I have these lights already..

They come wired so it's a direct plug and play exercise.. The Halos and LEDs come on if you move the stalk to parkers.. They also come on if the lights are set to auto and the headlights come on.. If you want to have the halos/leds always on you will need to cut and connect to something like accessories (so they are always on when the car is on) They DO NOT come with any bare wires.. It is all plug and play if you have the stock HID ballasts/globes and igniters.

The current harness on your factory lights are not used at all.. as long as you have the original unhacked car headlight wiring harness (there is no need for this to be modified by compliancing etc so it should be intact and untouched)

The indicator bulb that comes with the lights is a dual filament bulb.. so its always on (USA style) You can buy a new bulb or just remove the connectors to the extra filament (takes 10 seconds to remove)

Lastly $140 to install these lights is a joke.. it took me maybe just over an hour to do both lights.. I am not a mechanic with access to a hoist.. I did it on my garage floor laying on cardboard with no jacking up involved

If you want new Bulbs

http://www.ebay.com....#ht_2346wt_1163

I'm very happy with them.. Don't go above 6000k though

Edited by Megahowler

Just contacted Jesse about these for myself.

Anyone else keen on them? I'd like to save a few buck if I can if you're interested as well.

Cheers

OK, scratch that.

No new group buy is going to organised.

I have these lights already..

They come wired so it's a direct plug and play exercise.. The Halos and LEDs come on if you move the stalk to parkers.. They also come on if the lights are set to auto and the headlights come on.. If you want to have the halos/leds always on you will need to cut and connect to something like accessories (so they are always on when the car is on) They DO NOT come with any bare wires.. It is all plug and play if you have the stock HID ballasts/globes and igniters.

The current harness on your factory lights are not used at all.. as long as you have the original unhacked car headlight wiring harness (there is no need for this to be modified by compliancing etc so it should be intact and untouched)

The indicator bulb that comes with the lights is a dual filament bulb.. so its always on (USA style) You can buy a new bulb or just remove the connectors to the extra filament (takes 10 seconds to remove)

Lastly $140 to install these lights is a joke.. it took me maybe just over an hour to do both lights.. I am not a mechanic with access to a hoist.. I did it on my garage floor laying on cardboard with no jacking up involved

If you want new Bulbs

http://www.ebay.com....#ht_2346wt_1163

I'm very happy with them.. Don't go above 6000k though

How blue are the 6,000k globes? I don't want any police attention, and my old HIDs @ 6,000k got me more than enough.

They come wired so it's a direct plug and play exercise.. They DO NOT come with any bare wires.. It is all plug and play if you have the stock HID ballasts/globes and igniters.

You are talking about the coupe' headlights where I was not, I was talking and displayed a picture for the sedan lights.

The coupe lights should be a straight drop in affair as the coupe' was released with projectors, the sedan however was never released with projectors so they are complete aftermarket hence the difference.

I have these lights already..

They come wired so it's a direct plug and play exercise.. The Halos and LEDs come on if you move the stalk to parkers.. They also come on if the lights are set to auto and the headlights come on.. If you want to have the halos/leds always on you will need to cut and connect to something like accessories (so they are always on when the car is on) They DO NOT come with any bare wires.. It is all plug and play if you have the stock HID ballasts/globes and igniters.

The current harness on your factory lights are not used at all.. as long as you have the original unhacked car headlight wiring harness (there is no need for this to be modified by compliancing etc so it should be intact and untouched)

The indicator bulb that comes with the lights is a dual filament bulb.. so its always on (USA style) You can buy a new bulb or just remove the connectors to the extra filament (takes 10 seconds to remove)

Lastly $140 to install these lights is a joke.. it took me maybe just over an hour to do both lights.. I am not a mechanic with access to a hoist.. I did it on my garage floor laying on cardboard with no jacking up involved

If you want new Bulbs

http://www.ebay.com....#ht_2346wt_1163

I'm very happy with them.. Don't go above 6000k though

I doubt very much those are "real Philips" esp since thats in AUD... They will colour fade fast. Even from america from a guy that just sells them and gets good rates is $90... bulk buy 10+ for $70each shipped

if you want 6000K then the best are Philips D2S 6000k 85122WX Ultinon @$90 if you want the most output of light then Osram's D2S CBI 66240. Also sold as Sylvania but $160

​$140 is to make a business run, if you are confident you can do it yourself

you do have to know "how" to do it. If you know then it will take an 45mins max.. more if you taking your time.

Doesn't get any easier than this guys: http://g35driver.com...mple-steps.html

Edit: Comparison between 4300K and 6000K globes on the g35. I will personally be getting the D2S 6000k (preferably Phillips).

Edited by Heretical

Yep it really is that simple - except you don't even have to undo the 10 bottom 10mm bolts - you can undo all the top ones and just lean the bumperbar forward/down and there is plenty of from from memory.

But to make it more fun, the 4 Adelaide guys are going to get together at my place, sink piss and do all the cars in one hit!

Yep it really is that simple - except you don't even have to undo the 10 bottom 10mm bolts - you can undo all the top ones and just lean the bumperbar forward/down and there is plenty of from from memory.

But to make it more fun, the 4 Adelaide guys are going to get together at my place, sink piss and do all the cars in one hit!

Can I tag along also!! Would be Epic to do it with people who know what there doing!!

So what globes are people putting in them? High beam & low beam options?

High Beam

Philips X-treme Vision H1 +100%

Low Beam

Philips 5000k D2S 85122CX

Can anyone with the lights installed please park the correct distance away from a wall and take a pic of the low beam and high beam, and if possible standing infront of the passenger side light, i want to see what how the drivers side cutoff is. Thanks alot!!

Edited by R6n350GT

^^^ Nate, what makes you think the high beam is H1? All references I can find say they are 9003/H4

http://g35driver.com...ment-guide.html

http://g35driver.com...el-numbers.html

Cause i have pulled the headlight apart, and looked at the high beam and its H1 , the low beam is H4 D2S but doesnt come with one so i will be getting some from

http://www.ebay.com/itm/130530352295?item=130530352295&viewitem=&sspagename=ADME:X:RTQ:MOTORS:1123&vxp=mtr

If we buy as a group we can get them for $70shipped, also has the Philips 5000k D2S 85122CX $70 shipped.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I like it when the counter chick leads you out the back into the racks and says "have a grub around in here and see if you can find what you need. I'll be back in a few minutes. Just left me in front of a massive motorised shelving system and 2-3 million fasteners, so I could find a peculiar SS shoulder bolt with cap head. Gotta love country towns.
    • I used this https://osgiken.com.au/product/os-giken-os-250r-lsd-gear-oil-80w250-1-litre/   shut my nismo 1.5 pro up by heaps…. Not silent though. Gives the car character and personality. It ain’t a carolla. If you want silent, put a quaife in it.
    • It's about the same time for me from Bunnings, or the Fasteners. My big push away from takeaway food, and gluten in general keeps me away from the Bunnings Snags too! Weather up here, I've been out for two walks today in the beautiful sunshine. Had a few little drizzles, and some wind, that honestly, a tin of beans and I could compete on how harsh she blows Thankfully, being this bit inland, we're not getting anything much really. Will probably pick up a bit more when/if Cyclone Alfie decides to come ashore. A few areas in the GC though, and south into NSW are really getting smashed though! Right now, I'm just annoyed Alfie hasn't hit, as I'm not allowed to crack into the BBQ foods like the bacon and eggs until the Cyclone hits "In case we lose power"...
    • I love fastener joints, the price difference between them and joints like Bunnings or Super Cheap is amazing, and they either have exactly what you want, or they can get it to quick They have even given me some for free when I only needed a couple of specific size In saying this, I have paid premium for fasteners from Bunnings if they have the sizes I need, but only for convenience really, as my local is only 10 minutes away, the Sushi joint near them is also a consideration  How's the weather Matt? Stay safe mate
    • Wideband is worth setting up if only for tuning purposes. I would not mess with the ignition system unless there's a misfire. HKS crank trigger is popular out here for the relatively easily sourced Denso crank sensor, not a bad idea to install as well regardless of power level on a standalone. Boost leak test is worth thinking about. Oil pressure sensor tied to a fuel cut isn't a bad idea either. Getting the tune figured out is a good idea. Without putting eyes on it and getting under it there's no way for us to tell you exactly what it needs but most likely you're down to the last 10% that will make a big, big difference in how happy you are with the car.
×
×
  • Create New...