Jump to content
SAU Community

Recommended Posts

Things have changed and its now time to sell the toys and buy a house :(. I bought the car around 18 months ago with the intensions of driving it on the weekend and using it for time attack. Since buying it I've driving it around 5 times one including the drive to Mallala with the SAU:SA track day where the car performed very well.

*SUSPENSION + BRAKES + ETC*:

R33 gtst front brakes (redrilled to 4 stud)

QFM A1rm fronts pads

Ebc Black Stuff Rear pads

Cusco 'AS' Front Strut Brace

Cusco 'OS' Rear Strut brace

Cusco Castor Rods

ISC N1 Coilovers with new Thrust bearing kit F8kg & R6kg

R32 GTR rear sway bar

*ENGINE + EXHAUST*:

Redtop SR

HKS GT-SS turbo in t25 housing

850cc injectors

3A racing pod

Hard intake pipe

z32 AFM

3" dump and front pipe

Air diversion panel

Nismo low temp thermostat

Oil cooler and relocation kit

Koyo Radiator with High pressure Cap

NEW Calcium battery

NEW HDI Front mount

NEW Walbro fuel pump

NEW braided turbo lines with inline filter

NEW gfb bleed valve

NEW overflow bottle

Needle Roller Spigot Bearing

-Custom 3" cat back exhaust with flutes

-High flow cat 100 cell?

-One Muffler

New Genuine Nissan:

-water pump

-clutch slave

-clutch master

-Cometic multi layered manifold gasket

-dump pipe gasket

-Manifold to turbo gasket

-New manifold studs

-New exhaust studs

-Nisstune

*EXTERIOR*:

Sun roof

[ ][ ]SILVIA[ ][ ] Head Lamps

Wing-less

Aerial-less

Gtr style Grill

Varrstoen te37 copies 17 x 9 + 12, 17 x 9.5 + 12

Federal 595 with 90% tread

Origin Roof spoiler

*INTERIOR*:

Nardi steering wheel and genuine horn

Greddy copy bucket drivers seat

Superlow seat rail

R32 GTR passenger seat

Digital Climate control

Pioneer head unit

Soundstream Tarantula 6.5" speakers

Auto meter boost, water temp, oil temp and oil pressure gauge

nismo gear knob

*DRIVETRAIN*:

NEW Braded clutch line

Turbo 5 speed box - new oil

Extra H/D single plate clutch

3.9:1 LSD 6 bolt - new oil

The bad: Body has had a respray a few years and but has a couple of marks in the paint (not noticable unless you get close), had some rust around sunroof but was cutout and fixed up.

Located in western suburbs Adelaide

Contact: 0430 362 050

P.M or email - [email protected]

post-50484-0-94413400-1329353912_thumb.jpg

post-50484-0-61371400-1329353930_thumb.jpg

post-50484-0-73147200-1329353980_thumb.jpg

post-50484-0-45696500-1329354003_thumb.jpg

post-50484-0-69069100-1329354023_thumb.jpg

post-50484-0-21130000-1329354043_thumb.jpg

post-50484-0-70287900-1329354638_thumb.jpg

post-50484-0-92361700-1329354657_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/391936-silvia-s13-1991-sa/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm not aware of e30 in Australia, but I'm pretty sure e85 is still around. You really want a setup with an ethanol sensor so you can run any mix of ethanol depending on what you can access. Fuel Check NSW app shows 14 site in sydney metro with e85. What are you adding, will you put in bigger turbs too? Apparently the wastegates are pretty small and can't bypass enough as you run more boost.  I'm sticking to 1.3 bar with 98 on the standard turbos with my tune on advice from the tuner, and boost drops significantly in the top end; apparently larger turbos with larger wastegates are needed to get anywhere meaningful from there.
    • Amazing work Duncan! It is never easy to pick up someone elses project and work all the parts out that are missing
    • Hey Ppl,   I am about to tuned my Infiniti Q60 with E-85 and if you can tell me some location where I can top up my car that would be great.   But my other question, is E-30 available because this tuned requires less mods parts and any info you can offer would be greatly appreciated too!!
    • Hey Duncan,   The parts have already been made by AMS Performance in Chicago, but I still to confirm if there are in Petrol Station in Sydney that sell E-30.   I know there are a few seeling E-85.      
    • That probably needs a specific thread....and if you want to run different ethanol mixes you will need the ethanol sensor and wire it into the ECU (which has different requirements depending on the ECU year apparently)
×
×
  • Create New...