Jump to content
SAU Community

Recommended Posts

I have just bought an r33 and i was wondering is it dangerous on the engine when I redline from time to time. this evening was first time i hit the limiter when going through a tunnel and i didnt realise how much the car would bang and shoot flames. should i be staying away from doing this or is it ok now and again

post-91748-0-56315800-1329490102_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/392126-red-lining-a-r33/
Share on other sites

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

Thats fully sik bro, a pimp car like that needs to be redlined as often as possible when u get the chance, not driven like a nanny! Thats what skylines r made for bro, RBs are made for that n flames n banging are perfectly normal....

If you hold it on the red-zone for like 15-20secs while driving n shifting every couple days or so, you will have a very healthy n clean engine as that will suck all the shit n carbon build-up out of your engine as some dude mentioned above.

yeah limiter bashing is completely fine . . I used to do it all the time . . . Well Atleast until something unrelated killed my oil pump . . But as i say , that was absolutely nothing to do with limiter .

Oh yeah and some chikos and most cops give mad respect for limiter bashing and flames.

I suggest you read up on rb engines and valve bashing it hmm wonder why they call it valve bouncing?

Redline/limiter /= valve bounce.

I used to hit the limiter often in my 33. No harm done.

I wouldn't suggest holding it on the limiter, but flicking it every now and then won't be too much of an issue.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Unfortunately haven’t taken pics yet after it was finished. All the edges are hemmed nicely, just had to cut holes for the gear shifter and seat bolts and seat belt bolts in the rear. The molds seem like they’re done with steam and a layer of glue on the underside to hold a bit of shape but still soft enough that it’s a good fit when it’s all pressed down.
    • When's the rear mounted turbo kit coming? Needs dose and V8 chop idle lol.
    • I was very unimpressed with how the car came up from the A pillar forward, before I hit things (twice). It all has to go. It had to go, but now it has to go... more. So we finally found the very first Shennanigans with the entirely perfectly setup engine that had no problems being pulled apart to improve on 'was perfectly fine'. Cam bearings looked a bit... stock. Which isn't entirely bad given they were stock and this is a ~20 year old engine. So new cam bearings are on the way because it's somewhat difficult to get to this stage to do it later, and it will trash the block. It was quite unusual that it wasn't done when the perfectly new-looking VCM cam was originally installed by [unknown] What IS unusual is the cam that was installed there was advanced SIX degrees. As to why there is no way to know.. however it could have been @Dose Pipe Sutututu's mate who wanted a larger cam sound but also wanted it to come on earlier to be more usable. This is my dyno sheet with the previous setup - This cam is not supposed to peak until 7000+ RPM, according to VCM. This is what lead me down the whole 'my heads/intake setup is running out of puff and can't support the cam' line of thinking to begin with. Anyway too late now - New cam is in! It could be rather funny if this smaller cam acts like a larger cam because it isn't advanced six degrees. In the spirit of everything is working amazingly - the COMP cam required no dialling in whatsoever. It was about 0.5 degrees advanced, which seems pretty bang on. Any adjustment either way would be further out. I'm told as a chain breaks in it ends up regarding back about 0.5 a degree as the chain breaks in, making it bang on. In the spirit of everything was previously working amazingly - The timing gear that was taken out turned out to be was an N-Motion double timing chain kit, with adjustable cam gear (which is how it was 6 degrees advanced) and all looks entirely perfectly new. It also had a Torrington bearing, which was one of the reasons I ended up getting the Cloyes kit which they used in the C5R 24 hour racecar - Because I couldn't confirm what was in the engine when talking to Tony Mamo. I did believe however it was a Double chain kit of some kind... but found no supporting documentation or evidence for it.
    • I recently did this to my R33 with the full set from Car Mats Direct, they can't do the vinyl anymore that's advertised on the website due to a supplier issue so I ended up with the Black Loop Pile which looks great. I went all out with rubber sound deadening sheets from Repco and also added the sound deadening foam layer option with the carpet. Makes a world of difference and got rid of all the weird smells in the 29 year old interior. It was a bit of work but I'd 100% recommend it, Car Mats Direct had awesome customer service and quick postage. Replaced my seats with some sporty ones from Autotechnia while I was at it, feels like a new car.
×
×
  • Create New...