Jump to content
SAU Community

Wrecking 1995 R33 Gtr - Midnight Purple, Non V-Spec


Recommended Posts

  • Replies 190
  • Created
  • Last Reply

Top Posters In This Topic

Handbrake assembly? Something like below minus the hub

yeah, sent you a PM

hi would you happen to have the stock intake pipe that goes from the turbos i need the bit off the pipe that bolts onto the turbo with the two bolts i will take the whole pipe if you have it

nah i dont sorry..

SOLD PARTS:

Air Duct Airbox to LHS Guard

PS Pump

Floor Mats

Antenna

Relay Box

BOV's & Return

Standard Struts

A Pillar Trim

Driver Electric Window Switch

Series 2 Front Lip

Instrument Cluster

Diff

Rear Driveshafts

Passanger Door Trim

AC Compressor & Bracket

S3 Xenons

Rear Seats

Front Lower Control Arms

Plastic Trim Rear of Boot

Link to comment
Share on other sites

SOLD PARTS:

Air Duct Airbox to LHS Guard

PS Pump

Floor Mats

Antenna

Relay Box

BOV's & Return

Standard Struts

A Pillar Trim

Driver Electric Window Switch

Series 2 Front Lip

Instrument Cluster

Diff

Rear Driveshafts

Passanger Door Trim

AC Compressor & Bracket

S3 Xenons

Rear Seats

Front Lower Control Arms

Boot Trims, Plastics, & Carpet

Link to comment
Share on other sites

SOLD PARTS:

Air Duct Airbox to LHS Guard

PS Pump

Floor Mats

Antenna

Relay Box

BOV's & Return

Standard Struts

A Pillar Trim

Driver Electric Window Switch

Series 2 Front Lip

Instrument Cluster

Diff

Rear Driveshafts

Passanger Door Trim

AC Compressor & Bracket

S3 Xenons

Rear Seats

Front Lower Control Arms

Boot Trims, Plastics, & Carpet

Brake Air Ducts

Link to comment
Share on other sites

was wondering if i could borrow it just to pass a rwc and give it back

i never drove the car they came from but i can't see anything wrong with them from visual inspection, they came from an immac low km gtr.

$250 for complete set of struts, $300 delivered to your door.

its a standard airbox so yes it'll pass but its not for sale sorry mate

Link to comment
Share on other sites

Do you have the clutch master cylinder the one thats on the fire wall behind the brake booster?

i'm not too sure i'll have to check and get back to you. will shoot you a PM tonight.

was wondering if i could borrow it just to pass a rwc and give it back

sorry mate i'm not lending out parts.

SOLD PARTS:

Air Duct Airbox to LHS Guard

PS Pump

Floor Mats

Antenna

Relay Box

BOV's & Return

Standard Struts

A Pillar Trim

Driver Electric Window Switch

Series 2 Front Lip

Instrument Cluster

Diff

Rear Driveshafts

Passanger Door Trim

AC Compressor & Bracket

S3 Xenons

Rear Seats

Front Lower Control Arms

Boot Trims, Plastics, & Carpet

Brake Air Ducts

Driver Seatbelt

Link to comment
Share on other sites

SOLD PARTS:

Air Duct Airbox to LHS Guard

PS Pump

Floor Mats

Antenna

Relay Box

BOV's & Return

Standard Struts

A Pillar Trim

Driver Electric Window Switch

Series 2 Front Lip

Instrument Cluster

Diff

Rear Driveshafts

Passanger Door Trim

AC Compressor & Bracket

S3 Xenons

Rear Seats

Front Lower Control Arms

Boot Trims, Plastics, & Carpet

Brake Air Ducts

Driver Seatbelt

Steering Column

Link to comment
Share on other sites

Whats the grill like condition wise any cracks scratches ect? if good would you sell the battery terminal cover (engine bay) as well?

hey mate i'll take some pics next time im there n get back to you.

you're after the relay/fuse box lid yes??

Link to comment
Share on other sites

Thanks mate ,yup sounds like the one (goes in the engine bay left hand side black square looking thing with jap writing on it)

hey small crack in the grille, and few of the plastic ends which the tiny washers go on and hold the grille in have broken.. the grille sits fine without them anyway.

SOLD PARTS:

Air Duct Airbox to LHS Guard

PS Pump

Floor Mats

Antenna

Relay Box

BOV's & Return

Standard Struts

A Pillar Trim

Driver Electric Window Switch

Series 2 Front Lip

Instrument Cluster

Diff

Rear Driveshafts

Passanger Door Trim

AC Compressor & Bracket

S3 Xenons

Rear Seats

Front Lower Control Arms

Boot Trims, Plastics, & Carpet

Brake Air Ducts

Driver Seatbelt

Steering Column

Spare Tyre

Link to comment
Share on other sites

SOLD PARTS:

Air Duct Airbox to LHS Guard

PS Pump

Floor Mats

Antenna

Relay/Fuse Box

BOV's & Return

Standard Struts

A Pillar Trim

Driver Electric Window Switch

Series 2 Front Lip

Instrument Cluster

Diff

Rear Driveshafts

Passanger Door Trim

AC Compressor & Bracket

S3 Xenons

Rear Seats

Front Lower Control Arms

Boot Trims, Plastics, & Carpet

Brake Air Ducts

Driver Seatbelt

Steering Column

Spare Tyre

Relay/Fuse Box Lid

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • Great info @tidi0x  Will definitely be handy for others and maybe me if I decide to keep the shit box H pattern.
    • Bumping this up one last time.... I wanted to follow up on the clutch slave issue. I realized that what the issue comes down to is the pocket is flat milled, and the cylinder does not want rest flat. So in order to mount it correctly you will need to make a spacer for the fingers so the cylinder is floating. I took two plates of aluminum, drilled some holes and was good. I did still need to make the relief cuts in the bell housing, as even with the spacer the bleed section still interferes. The OE bell housing the mounting holes are raised from the housing.       
    • If the event in USA goes ahead will be interesting as it seems the rules will get more cars over here. Apparently the track is laguna seca too. Yeah s15, if I get a the lower dash trims, centre console and change front cross member to standard LCA position will fit clubsprint. See how rules are as i would rather do complete widebody than a bolt on flare to run the 295 with proper clearance.
    • If the car is legal height I can't see it being an issue. Found a thread on reddit that might offer some insight.   I got a ticket from a copper in QLD for my S15 being too low. They had this wheel thing on a stick that they put under the car and it hit my exhaust. Anyhow went to an exhaust shop to get the exhaust tucked up/hung a little higher and I wound the coilovers up a smidge. Don't think I even had to go back to the police station unlike when I got defected for having a carbon bonnet when I brought the S15 from the ACT to QLD and had to replace it and then rock up at a police station and have a yougish female officer who knew nothing about cars confirm that I had changed bonnets. Should have just painted the carbon bonnet yellow to match the rest of the car lol
    • Id like to race in the US i think alot of those track would suit me   For the s15? Youd be stuck between club sprint and the new Open Am wouldnt you depending on how much interior you have left in
×
×
  • Create New...