Jump to content
SAU Community

Skyline Op6 Highflow Turbo, Exhaust, Bc Coilovers, Cat, Hks Pod, Hks Boost Controller, New Bosch 040 And More


Recommended Posts

Hi guys,

I'm putting up for sale some parts off my car that I have recently put back to standard as I will be selling the car. All parts have less than 10,00k's on them and some even less than 5,00k's as the car was not used as a daily. Can organize postage at buyers expense and can organize times to look at the parts.

Call Daniel on 0405004111 or PM me if your interested in any of these parts

1. OP6 High flow turbo, bush bearing, no actuator. Bolts straight in and looks standard, don't know the exact size but it is good for 230-250 Kw at the wheels (obviously depending on what supporting mods you have). Done around 6,000k's since rebuild with these internals, in perfect condition, never had any issues with it and was working perfectly in my car before I took it off. I know it will fit R33 and 34 for sure, not 100% sure on R32 so you should check yourself. $700 ono

post-77341-0-04108500-1329549987_thumb.jpg

post-77341-0-40962200-1329550084_thumb.jpg

post-77341-0-48472800-1329550116_thumb.jpg

post-77341-0-30691100-1329550142_thumb.jpg

2. BC BR series coilovers, 8/6 spring rates, base height adjustable, 32 was compression/rebound adjustment, Fit R33 GTS25T. Done around 5,000K's on these and they are in great condition and never been used on the hardest setting so nothing is blown. Good combination for street and light track work. I bought these new but will sell for $850 ono

post-77341-0-95298400-1329550487_thumb.jpg

post-77341-0-64006800-1329550563_thumb.jpg

post-77341-0-42662200-1329550594_thumb.jpg

3. Genuine Bosch 040 fuel pump, brand new, never been used. Comes with wiring, fuses and relay and hose clamps as per the recommended instillation guidelines. $200 ono

post-77341-0-00088600-1329550754_thumb.jpg

post-77341-0-41397100-1329550781_thumb.jpg

post-77341-0-18358300-1329550819_thumb.jpg

4. HKS EVC 4 silver edition, comes with controller, harness, line filters and actuator. Used for around 10,000k's, works well and has an overboost warning and cut off so good backup in case something goes wrong. Everything works well and can be used with internal and external gate, $290 ono

post-77341-0-98206300-1329551128_thumb.jpg

post-77341-0-42381500-1329551240_thumb.jpg

5. some other random parts;

-JJR 3" stainless steel bell mouth dump pipe for R332/R33 $130ono

post-77341-0-06202800-1329551664_thumb.jpg

post-77341-0-45795100-1329551732_thumb.jpg

-CATCO 3" high flow ceramic cat for S13, Z32, R32/33/34 $120 ono

post-77341-0-09257600-1329551771_thumb.jpg

post-77341-0-54930400-1329551906_thumb.jpg

-HKS pod filter with BOV plumb back attachment, bolts straight onto the AFM for R32/33/34, Z32 and S13/14/15 $30 ono

post-77341-0-05185500-1329552064_thumb.jpg

post-77341-0-99988600-1329552102_thumb.jpg

-NEOTECH rear camber arms for R33, R34, S14 and S15, 5,000k's done with them, $90 ono

post-77341-0-43465000-1329552134_thumb.jpg

Link to comment
Share on other sites

Any dyno sheets showing power/ boost level?

Never had the car on the dyno as I never put an aftermarket computer on there. I had a friend who was running the same turbo on RB25 and he was making around 250 RWKW on somewhere around 20psi, but this is all depending on your supporting modifications of course.

Link to comment
Share on other sites

Hi guys,

I'm putting up for sale some parts off my car that I have recently put back to standard as I will be selling the car. All parts have less than 10,00k's on them and some even less than 5,00k's as the car was not used as a daily. Can organize postage at buyers expense and can organize times to look at the parts.

Call Daniel on 0405004111 or PM me if your interested in any of these parts

1. OP6 High flow turbo, bush bearing, no actuator. Bolts straight in and looks standard, don't know the exact size but it is good for 230-250 Kw at the wheels (obviously depending on what supporting mods you have). Done around 6,000k's since rebuild with these internals, in perfect condition, never had any issues with it and was working perfectly in my car before I took it off. I know it will fit R33 and 34 for sure, not 100% sure on R32 so you should check yourself. $700 ono

post-77341-0-04108500-1329549987_thumb.jpg

post-77341-0-40962200-1329550084_thumb.jpg

post-77341-0-48472800-1329550116_thumb.jpg

post-77341-0-30691100-1329550142_thumb.jpg

2. BC BR series coilovers, 8/6 spring rates, base height adjustable, 32 was compression/rebound adjustment, Fit R33 GTS25T. Done around 5,000K's on these and they are in great condition and never been used on the hardest setting so nothing is blown. Good combination for street and light track work. I bought these new but will sell for $850 ono

post-77341-0-95298400-1329550487_thumb.jpg

post-77341-0-64006800-1329550563_thumb.jpg

post-77341-0-42662200-1329550594_thumb.jpg

3. Genuine Bosch 040 fuel pump, brand new, never been used. Comes with wiring, fuses and relay and hose clamps as per the recommended instillation guidelines. $200 ono

post-77341-0-00088600-1329550754_thumb.jpg

post-77341-0-41397100-1329550781_thumb.jpg

post-77341-0-18358300-1329550819_thumb.jpg

4. HKS EVC 4 silver edition, comes with controller, harness, line filters and actuator. Used for around 10,000k's, works well and has an overboost warning and cut off so good backup in case something goes wrong. Everything works well and can be used with internal and external gate, $290 ono

post-77341-0-98206300-1329551128_thumb.jpg

post-77341-0-42381500-1329551240_thumb.jpg

5. some other random parts;

-JJR 3" stainless steel bell mouth dump pipe for R332/R33 $130ono

post-77341-0-06202800-1329551664_thumb.jpg

post-77341-0-45795100-1329551732_thumb.jpg

-CATCO 3" high flow ceramic cat for S13, Z32, R32/33/34 $120 ono

post-77341-0-09257600-1329551771_thumb.jpg

post-77341-0-54930400-1329551906_thumb.jpg

-HKS pod filter with BOV plumb back attachment, bolts straight onto the AFM for R32/33/34, Z32 and S13/14/15 $30 ono

post-77341-0-05185500-1329552064_thumb.jpg

post-77341-0-99988600-1329552102_thumb.jpg

-NEOTECH rear camber arms for R33, R34, S14 and S15, 5,000k's done with them, $90 ono

post-77341-0-43465000-1329552134_thumb.jpg

Dont know how to add this to the post but I have said 6,000k's on the rebuild but it is actually around 10,000k's. Sorry for the mistake

Link to comment
Share on other sites

  • 2 weeks later...
  • 3 weeks later...

Hi,

I am just about to buy some new BC coilovers but may consider used items if the price is right. I notice you say "Done around 5,000K's on these and they are in great condition and never been used on the hardest setting so nothing is blown." From that comment I assume that they blow the seals out if set to the harder setting? Thats OK, I only need them for street use and will keep them on the softest setting. Considering that they are only good set for soft use on the street and will likely fail if set for any harder, I think they are worth offering $400.

Kind Regards

Black_R33

Link to comment
Share on other sites

Hi,

I am just about to buy some new BC coilovers but may consider used items if the price is right. I notice you say "Done around 5,000K's on these and they are in great condition and never been used on the hardest setting so nothing is blown." From that comment I assume that they blow the seals out if set to the harder setting? Thats OK, I only need them for street use and will keep them on the softest setting. Considering that they are only good set for soft use on the street and will likely fail if set for any harder, I think they are worth offering $400.

Kind Regards

Black_R33

Hi there,

I say this as I have heard of people blowing there coil over by having them set to had and hitting big bumps, i only used them for street use so I am just saying they are in full working order with no problems. They are more than capable of being used on harder settings just like a now set of coilovers so I believer my asking price is pretty reasonable as a $1300 set of new ones is going to be in exactly the same condition.

Thanks,

Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Latest Posts

    • Hi all,  I have a older model of the Greddy Front facing intake on an RB25DET NEO Head. I've bought aeroflows fuel rail and injector kit (1000cc Bosche injectors) and I'm unsure if the fitment is correct. The injector o-rings fit in the intake hole but it's not snug. I can very easily rotate the injectors even when the fuel rail is mounted. The kit also came with multiple adaptors, they dont make it any more snug and using them raises the injectors up and i cant mount the fuel rail. I hope this makes sense I've asses a few photos.    Thanks so much guys. 
    • So, to run the 4g aerials to the booster, I had to get access to the rear bulkhead....bit of a mission. Hot tip, don't offer to help change the rear shocks for a mate with a v37.... Remove seat base, 2 clips that slide forward to release it the it lifts straight out Fold down rear seat (pull in from boot) The side bolster of the rear seat is not connected to the middle parts that fold. To remove unbolt at the bottom bolt then push it up off the top hook Then there is a plastic surround behind the seat back, 2 pop out clips, 2 bastard clips, some swearing at it is out Pop the rear seat latch surround off Remove door surround lower trim then side trim  Remove c pillar trim - 4 clips, pull inwards not forwards Remove metal brace - 5 bolts 1 nut Then you have got to the rear strut top...what a pain!
    • If you really want squish back, you can have it put on the piston (at least to some extent).
    • Impressive. He's very very smooth.
    • What does IPDM stand for ?
×
×
  • Create New...