R34 Gtt To R34 Gtr

[StevenCJR31]

Hi, my apologies if this has been asked before . . .can a GTR front bumper and bonnet be fitted to a GTT without much hassle?can the GTT reo be used? the catch needs to be changed?

[ecliptor]

Hi, my apologies if this has been asked before . . .can a GTR front bumper and bonnet be fitted to a GTT without much hassle?can the GTT reo be used? the catch needs to be changed?

I presume this is for a R34, yes you can put the GT-R bumper and bonnet on a GT-T but you will also need the GT-R front guards as they are wider than the the standard GT-T one's which means you will pretty much need the rear quarter panel guards as well since it will look weird with pumped guards up front and the skinny GT-T rear, and yes the bonnet latch needs to be changed and the hinge's too if I recall.

There's old post's that go into more detail floating round on here if you have a search.

Edited February 19, 2012 by ecliptor

[Hanaldo]

can a GTR front bumper and bonnet be fitted to a GTT

This bit yes.

without much hassle

This bit no.

[StevenCJR31]

I presume this is for a R34, yes you can put the GT-R bumper and bonnet on a GT-T but you will also need the GT-R front guards as they are wider than the the standard GT-T one's which means you will pretty much need the rear quarter panel guards as well since it will look weird with pumped guards up front and the skinny GT-T rear, and yes the bonnet latch needs to be changed and the hinge's too if I recall.

There's old post's that go into more detail floating round on here if you have a search.

yeah definatley for a r34 as in the title of my post . . sounds like i wont be doing this as it looks to be a LOT of work and would explain why i havnt seen one on the road, thanks for the replies guys

Edited February 19, 2012 by StevenCJR31

[shinobi_s14]

I recently just put a bonnet and bumper on my GTT.

The front bumper can fit with the standard GTT guards with a bit of overhang in the guards (about 5mm or so). I suppose you could cut that bit off but I'm not too fussed about the over hang hence why I didn't get the GTR fenders and like ecliptor said it would've look funny with wide front and narrow rear

PM me if you have any questions

[shinobi_s14]

Forgot to attach a photo before

[Captain Natro]

use the search function, been covered at least twice in the last 6 months.

[skyline.gtt.34]

I recently just put a bonnet and bumper on my GTT.

The front bumper can fit with the standard GTT guards with a bit of overhang in the guards (about 5mm or so). I suppose you could cut that bit off but I'm not too fussed about the over hang hence why I didn't get the GTR fenders and like ecliptor said it would've look funny with wide front and narrow rear

PM me if you have any questions

quick Q r u able to use the standard reo from the GTT and where did u get ur hinges from and how much as i am in process of doing change over now

[shinobi_s14]

Hey mate, yeah the gtr bumper fit straight over my standard reo, and I ordered my hinges brand new through Nissan, costed about 90 each and took about 3 weeks to get here

[elir32]

http://www.skylinesaustralia.com/forums/topic/421233-r34-gtt-with-gtr-front-end-conversion-rims-and-mfd-how-to-do-info-pics-parts-listing-prices-etc/

This will help for all gtr front end conversions

Edited March 7, 2013 by elir32

[ishyz34]

Why not fit Eastbear? Plastic products, haven't heard of anyone who's had a hassle with them?
http://ic2.pbase.com/o6/87/719687/1/119567827.XgqLZMMl.website09SAUShowNShine23.jpg

[TM7GTR]

Because it isn't a proper wide guard conversion ^

[alex182]

and it's expensive. VERY expensive

[TM7GTR]

That too, but I'm sure it has to be cheaper than a full GTR conversion lol. Just the front of mine + flared rear guards + respray is burning a hole in my wallet

[GTR-N1]

hmmm, maybe I should dust off my white N1 bar > cough* looks pretty standard to me - lol