Jump to content
SAU Community

Recommended Posts

hey guys i need some help. heres the story have a rb25neo swapped s14 i previously had no spark and no injector pulse so after some diagnosing using this site found i had a bad cas. i swapped out the sensor pick up from a s1 rb25 (metal case) and installed it into my cas (hitachi, black case). heres my problem i have injector pulse when i have the signal wires wired one way and no spark and when i swap the two signal wires i have spark no injector pulse. so my question is why am i only receiving one signal? i checked for continuity and the wires are ok and the grounds are ok. any advice is helpful thanks

Link to comment
https://www.sau.com.au/forums/topic/392371-rb25-neo-cas-issue/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...