Jump to content
SAU Community

R33 Non Turbo Grinding In Reverse

wiix
 Share

Recommended Posts

HR32GTS 4DOOR Community Regular

HR32GTS 4DOOR

Posted
Posted

Hey Dude just letting you know just posting a problem like with with little description is a way to just get flamed. More info would be good if you would like help but if you aren't too good with cars just take it to a mechanic.

wiix Contributor

wiix

Posted
  • Author
Posted

im good with cars more info like age it is a 1994 50,000km we have done clutch fluid and gear oil i used castrol vmx-m 75-85 filled till it came out the hole the problem started 1 week ago all the work was done 4 weeks ago so dose any one know?

central coast person Proficient

central coast person

Posted
Posted

It has nothing to do with your oil, sounds like your clutch is not disengaging properly so try your master cylinder or slave cylinder for leaking fluid as it sounds like there is not enough pressure it may even be the clutch pedal.

Also reverse is a straight cut gear not helical like all the others so it should be that slight bit harder to get into gear as they are not meshed like a helical gear, just use your muscle and throw it into reverse and you wont have a problem.

wiix Contributor

wiix

Posted
  • Author
Posted

he said the clutch may be dragging and if the oil is low or the wrong type he said it may spin the gear faster and been strait cut it will grind and not go in to place like the other gears but he said the clutch splines could be sticking or the slave isnt pushing out enough

bubba Grand Master

bubba

Posted
Posted

My non-turbo 34 does the same thing most mornings on cold start, goes in but makes a horribly grinding/whirring noise.. pop it out of gear, pump the clutch a few times and put it back in, no worries. If I pump the clutch a few times BEFORE trying to put it into reverse for the first time, it doesn't do it.

This leads me to suspect there is a tiny bit of air in the system..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • JV7
      Diy - How To Repair R33 Air Mix/blend Actuator

      By JV7 · Posted

      Mate you saved be from dying in the Perth summer. AC wasn't changing direction and just going into diagnostics mode fixed it. You're a legend and I would shout you a beer if I could!
    • Dose Pipe Sutututu
      I need more than help to finish my R33

      By Dose Pipe Sutututu · Posted

      Unfortunately effort gone to waste, you will have substantial issues with how the manifold and wastegate have been integrated. You would be so much better off with a modified stock manifold like this: https://hypergearturbos.com/product/rb25detexgatedmanifold/   OR literally just getting a off the shelf Sinco or 6Boost manifold as myself and others have mentioned.  
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Noice. Mostly.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • GTSBoy
      I need more than help to finish my R33

      By GTSBoy · Posted

      Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
×
×
  • Create New...