Jump to content
SAU Community

Recommended Posts

Hey guys,

I've just bought an R31 coupe in japan and was wondering what you guys think i'll be looking at power-wise from the engine thats in her.

RB24DET (rb26 crank, rods and tomei pistons)

KKK K27 turbo

Trust high mount manifold and external gate

rb26 plenum and injectors

rb26 cooler

HKS FCON V

HKS EVC

thats about all i know, its garenteed to have lots more mods as i can see alot of things in the pics i got that wern't listed.

so what do ya think? am i looking at over 200rwkw here?

Cheers

Karlos

Yea i thought it looked like a monster turbo. hmm wonder how laggy it'll be?

well non complied i'll be getting it for around 10k but then i'm gunna have to get it through compliance. i'm hoping if i chuck the standard manifolds and turbo back on the 2.4 will still pass emissions at regency. should cost a couple thousand plus to get it complied because of all the shit i have to return to standard! :(

Racing Porches and Ruf Porches run K27 in single and twin forms, so should be a dood thing. Is it a Blitz or original KKK turbo?

If everything is in order i woudl expect power to be up around 280-320rwkws depending on some of the mods, and boost it runs. Just be sure its actually has the internals before you wind up the boost too high, its way too easy to claim all sorts of things with regards to stroker cranks and pistons, so a quick inspection woudlnt go astray before you start turning up the wick and showing the R33 and GTR crowds what an RB20 can muster...any pics?

ok i'll load some pics onto my webspace.

worth buying one what? a spare car? i thought about getting a front cut but hopefully i can lease an rb20det and the rest for a week just to get through regency for considerably less than buying a FC.

280rwkw?! shit sounds like i'll be looking at a ****in quick car!

yeah i noticed the 2nd fuel rail aswell, didnt notice the single throttle, hmmm i must contemplate this new discovery..

i wonder whether thats 12 GTR injectors or 6 RB26 and 6 RB20 injectors.

also notice the remote oil filter, oil cooler?

wish these japanese were more informative, i wonder what clutch its got? whats the gearbox gunna be like when my last box broke with only 170rwkws?!

oh and this is gunna be my daily driver! :headspin:

Looking at how close the inlet manifodl sites to the inner guard/strut, it looks as though they may have cut the std RB20manifold off after the injectors and rail mounts, then either welded a flange to bolt to the RB26 plenum, or cut off the flange on the RB26 plenum and welded it to the modded RB20 plenum.

Does anyone know where the injectors on an RB26 inlet setup are bolted, im guessing its after the 6 throttle bodies? Perhaps the 2nd row of injectors are acoomodate dby welded sockets in the plenum, rather then using the STD GTR rail and mount, which actually the 2nd rail looks liek they use hose tails so may not be std GTR Injectors.... be fun to play PI when the car arrives

Hmm, wonder why they've used 12 injectors anyways? why not just go 6x GTR ones and use the entire rb26 inlet plenum/throttles? gtr injectors are large enough arnt they?

looks like i may need to change the whole motor over to get it through regency, not just swap int/ex manifolds and turbo. i doubt the 2.4 would pass emissions with all standard gear (inc ecu/loom) chucked on.

0HR30t the interior is in awsome nick, looks brand new, tons of aftermarket gauges etc too, just no stereo.

a few r32's came in with similar mods they were pretty good my suggestion is wait till it gets heere and talkto the compliance engineer first. I think the lease of a complete motor might be a better ideaor else you might upset the balance and set up of the old one) and itwill be alot easier alot easier to unbolt and bolt in.

hope for 250 rwkw and be very happy if you get more the car will be laggy even with the 2.4 kit but should rev very well and very high. enjoy

meggala

I think if lag is a problem i'll swap the turbo for something smaller, mabye a 2835r or the like. trouble is if i do that then i'll have to get the ECU retuned or change it altogether. anyone in adelaide that knows the Fcon's?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • H2 (for cars) will never happen. It's not reasonable for any number of reasons. It's also not reasonable for almost all of the industrial uses that the fanbois say that it will be used for, again for a large number of reasons. There are some cases where it will be good. But, even those will be massively hampered by the economics. The only way that H2 can be economic is if we somehow manage to get from where we are to the other side of the economic-valley-of-death in which no-one can operate. You need there to be sufficient renewable generated electricity to be available so that it is effectively free. Once you are there, you can do whatever the hell you want and hang the efficiency. But until you get there, the ever diminishing value of electricity makes it harder and harder to encourage businesses to build the new generation capacity, and they will simply stop investing in generation projects. (I kinda think there needs to be just government money spent on building the required capacity in a non-commercial way, similar to how the first fossil fueled grids were built, as national-government owned utilities. And probably some nuclear in there to start. But this all should have started 10-15 years ago to avoid the chasm of death that we face right now). Synth fuels will be much more likely, but will only occur is there is at least some renewable H2 production, because you need H2 to do it. And you need stacks of free (or at least extraordinarily cheap) energy because assembling molecules back into fuels is exactly the opposite process to burning the fuel, and the reason we burn fuels is because there is so much energy squeezed into each molecule. So you're somewhat subject to the same economic valley of death problem as above anyway. That is unless people are willing to pay the current equivalent of $5 or $6 per litre of petrol-ish liquid fuels. Can you imagine it? The squealing at $2 now is bad enough.
    • This is so cool. Get a dashcam that records audio and hopefully you'll catch it.  Maybe there's a brand or some kind of markings on the back ? Are the pics hand drawn? I love it so much.
    • Hahaha yep, point(s) taken. I just like seeing different things and an EV in an R32 is pretty different. I'm not on the EV band wagon, I'm waiting for synthetic fuels or hydrogen personally. 
    • I mean it's probably likely that people overestimate their skills in dialling in a setup and noticing the changes. I had SK shocks and springs, and added heavier springs and got them revalved by Sydney Shocks to suit based upon what I told them I wanted the car to handle like. I got back a completely different feeling set of shocks, which probably (?) feel great on track but holy hell are they rough on tram tracks and the like. The shock dyno actually looks pretty similar to Shockworks (from what I can surmise from a screenshot of a youtube video - and my dyno printout...) Truth be told I doubt I'd be any faster or slower with either setup, or camber/castor combination. I also had whiteline eccentric castor bushes up front of my R34. I removed them and put in poly non-adjustable ones to soothe my OCD (nobody ever set the castor the same side to side, and it'd be near impossible to do) and be happy the wheel is centered in the well now for clearance reasons. Yes I wanted it to move 1mm 'back' :p I've effectively set my castor back to stock, negating all the benefits of that which is supposedly massive. I've probably also altered toe and camber in a negative (detrimental) way. I can't tell any difference steering the car.
×
×
  • Create New...