Jump to content
SAU Community

Recommended Posts

My definition of Side stepping is;

- Hold the clutch pedal down

- Bring engine to desired RPM

- Move your foot sideways off the clutch ("sidestep") and let the clutch spring take over

All it does is let any little slackness close and let the whole drivetrain lean on the clutch so when you pop it you don't have the little tollerences bang closed. The clutch won't do anything harmfull in comparison to the actual clutch drop

can someone please explain side stepping?

i got a 1.89 60ft by dropping the clutch at 7k with wheel spin all of first on the limiter lol. ran a 12.1

got 315 rwkw with 255/35/18 profile tyre. kept pressure at 36 because it was still bogging down at 6500 rpm .

with my setup how would use do it?

What brand tyres where they cheapies or actual quality?

Reason i ask is my mate cracked a 12.3 on a 34R with nothing but 1.2bar boost on the stock ceramics and a full exhaust with Bridgestone RE01's (still running std injectors, fuel pump, ecu). It was only about 255awkw from memory too.

So is launching the car in 2nd the way to go? Or is that only if you have a certain amount of power at the wheels. Ive got just over 280 awkw so would it be best in first or second?

  • 1 month later...
  • 1 month later...

www.youtube.com/watch?v=l_eR-39CK9Y&sns=em

Hey Xklaba u remember me beating u a few years ago in my old GTR?

Man i suck at Embedding vids with my phone. Have to copy to address bar

yeah I remember, and that smoke was number 2 piston going bye bye, I had run 11.36 before that and I have sence run 11.13 with only 293rwkw and stock turbos :P

hand brake is the best way IF you have a good clutch, other wise no hand brake dial in 7000-7500 and just find friction piont then ride out works for me

second gear launchs in standed ratio 34 or 32 and 33 with 4.33 diff ratios other wise use first and short shift to second

  • 2 months later...

^^ how i launched afew weeks back, although only took it to 6800rpm to launch, finding the friction point then riding out gets best traction and 60ft times too

gonna try 7000-7500rpm next time and see what difference it makes

what sort of tyre pressures did you run XKLABA ?

street tyres ( 265/35/18) I run 30 psi, you need the pressure to keep the centre of the tyre flat on the ground with even pressure across the tread and since the side walls of low profile tyres don't twist/flex there is no advantage to lowering the pressures, all it does is make the side walls take the weight and reduce the grip in the middle of the tyre

Drag tyres, ( 255/50/16 Toyo TQs ) 18-20psi, opposite of the street tyre reasoning

bahaha, standard ratio R33 GTR, use first and short shift into second, even with stock turbos that get 19psi by 2800rpm it's hard to keep it on boost on a second gear launch, so much so I don't even try it anymore and I reeeaaally hate clutchs

best last night for me was 11.3sec again, but this time with a 127.5mph....7500rpm clutch slip seemed to work good and not bog down....traction was abit of an issue though :/

going drags is getting addictive

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • had 4 weeks off over xmas and well did some stuff to the shed and BRZ, well short of is I don't work full time in supercars anymore as of yesterday.........
    • Did you get any down time over Christmas, or have you had any since to play with this? Or have you given up and are trying to get yourself a second hand V8SC instead?
    • A random thought I had just before I hit "Submit on this post". If brake fluid, in a container in my garage that has never been opened goes bad after 18 months, why can I leave it in my car for 24 months in an "unsealed container"... Secondly, some other digging, and brake fluid manufacturers seem to be saying 5 year shelf life... Me thinks there line on 18 months for an unsealed bottle is pretty much horse shit marketing spin. Kind of like how if you drive a car and don't run a turbo timer your turbo and motor will die horribly...   Where I started on this though... Someone (me) started down a bit of a rabbit hole, I don't quite have the proper equipment to do Equilibrium Reflux boiling per the proper test standards. I did a little digging on YouTube, and this was the first video I found on someone attempting to "just boil it". This video isn't overly scientific, as we don't have a known reference for his test either. Inaccuracy in his equipment could have him reaching the 460 to 470f boiling point range in reality. In the video, using a laser temp gun, he claims his Dot3 that's been open in his florida garage for over a year gets to about 420 to 430 fahrenheit (215 to 221c) Doing some googling, I located an MSDS for that specific oil, and from new, it claims a dry boiling point of 460 to 470f. Unfortunately they don't list a wet boiling point for us to see how far it degraded toward its "wet" point. While watching it I was thinking "I wonder what the flash point is..." turns out its only 480f for that specific brake fluid....   As for testing the oil's resistance, I might not be able to accurately do that unfortunately. Resistance level will be quite a LOT higher than my system can read I suspect based on some research. However, I might be able to do it by measuring the current when I apply a specific voltage. I won't have an actual water % value, but I'll have some values I can compare between the multitude of fluids. I'll run some vague calculations later and see if I should be able to read any reliable amount of current. These calcs will be based on some values I've found for other oils, and see how close I'll need my terminals together. From memory I can get down to 1pA accuracy on the DMM. I don't think my IOT Power Tester has any better resolution.    
    • No, with a twin plate clutch flywheels and clutch pressure plate/friction disks go together. Only clutch where that isn't the case is the Uniclutch but they currently don't make a pull version for the Getrag R34, just some other cars. Personally the flywheel is as light as I'd want it to be. It already drops revs faster than I want to shift normally and I blip the throttle again to rev match on upshifts.
    • Are there any other lighter flywheels that can be used with nismo coppermix twinplate system? Id like to gave the revs pick up faster than oem
×
×
  • Create New...