Jump to content
SAU Community

Recommended Posts

Sparco Rev seats BRAND NEW with sideplates, rails and harness. These seats are the same as Sparco EVO’s, however,they are slightly narrower.

These seats were purchased for $3000 brandnew for a project that never took off and have been in my shed wrapped inplastic ever since.

Seats, side plates and rails available alltogether for $700ea

Harnesses sold separately for $150ea

I have two seats available each with side plates, rails and matchingharnesses.

No swaps, pick up only.

post-53617-0-39310400-1330348875_thumb.jpg

post-53617-0-72839800-1330348902_thumb.jpg

post-53617-0-68077300-1330348928_thumb.jpg

post-53617-0-37215100-1330348949_thumb.jpg

post-53617-0-60444200-1330348974_thumb.jpg

post-53617-0-38364400-1330348999_thumb.jpg

post-53617-0-26089600-1330349023_thumb.jpg

5 speed WRX Dog box PPG gear set withbillit selector forks and reverse lock out. Gearbox is in good condition andhas only done 3000km’s. Gearbox was taken apart to show condition of gears (seephotos). This gear set was purchased for $11,500 brand new. Will come with allthe spare parts that we currently have from the other WRX gearboxes at no extra cost. DCCD rear end and two spare standard WRX ends as well as a spare gear box.

Price - $4,500 (non-negotiable)

No swapping, pick up only.

post-53617-0-98208200-1330349125_thumb.jpg

post-53617-0-63988000-1330349462_thumb.jpg

post-53617-0-37264800-1330349522_thumb.jpg

post-53617-0-65555400-1330349560_thumb.jpg

Built RB25DET yet to be run. This enginehas been machined and built with fully forged internals. Re-built the enginefor a project that ran out of funding and has been in my shed wrapped inplastic waiting to go to a good home. Engine comes with the following brand newitems:

  • Eagle Rods (fitted)
  • King bearings - Main bearing & Big endbearings (fitted)
  • CP Piston & Rings (fitted)
  • JUN crank collar (fitted)
  • ARP Stud Kits (fitted)
  • HKS Ex Cam Gear
  • Cometic MLS Head Gasket – 1.2mm
  • Ported head – has no lifters
  • 3 angle valve job
  • N1 water pump
  • N1 oil pump

All parts that are not fitted, still comewith the engine as separate parts.

Price - $4,500 for engine and all parts

Please note that the turbo kit seen on the engine is sold separately. Please see my posts to view details.

No swaps, pick up only.

post-53617-0-23171000-1330350135_thumb.jpg

post-53617-0-91831900-1330350174_thumb.jpg

post-53617-0-70820200-1330350210_thumb.jpg

post-53617-0-60443400-1330350247_thumb.jpg

post-53617-0-51560000-1330350285_thumb.jpg

post-53617-0-86728800-1330350328_thumb.jpg

post-53617-0-27011600-1330350370_thumb.jpg

Brand new HKS turbo kit yet to be run. Waspart of an engine build that ran out of funding and has been un-used, wrappedin plastic ever since. Full turbo kit details are:

HKS 3037S turbo AR .87, 48T, GT25 Exhaustflange - $2,500

HKS Manifold - $1,100

HKS 50mm wastegate - $900

Happy to split up kit and sellindividually.

No swaps.

post-53617-0-88049300-1330350625_thumb.jpg

post-53617-0-84443200-1330350634_thumb.jpg

post-53617-0-36190500-1330350642_thumb.jpg

post-53617-0-73974100-1330350667_thumb.jpg

post-53617-0-47484600-1330350691_thumb.jpg

post-53617-0-91106300-1330350696_thumb.jpg

post-53617-0-61903800-1330350724_thumb.jpg

I have no idea what you just did or wat any of that means but ok :)

Threads merged.

Read the forum rules before mass-spamming with singular threads in the future.

Brand new HKS turbo kit yet to be run. Waspart of an engine build that ran out of funding and has been un-used, wrappedin plastic ever since. Full turbo kit details are:

HKS 3037S turbo AR .87, 48T, GT25 Exhaustflange - $2,500

HKS Manifold - $1,100

HKS 50mm wastegate - $900

Happy to split up kit and sellindividually.

No swaps.

This is an RB25det Kit forgot to mention that.

I also have my Nismo gt lsd complete in the housing done less than 1000kms $1000 firm can pick up from Ipswich or pickup from my house in Brisbane.

post-53617-0-74473600-1330750634_thumb.jpg

post-53617-0-23158400-1330750657_thumb.jpg

post-53617-0-86398100-1330750682_thumb.jpg

post-53617-0-01115600-1330750706_thumb.jpg

post-53617-0-22489200-1330750729_thumb.jpg

post-53617-0-75639900-1330750752_thumb.jpg

post-53617-0-42642800-1330750770_thumb.jpg

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean it's probably likely that people overestimate their skills in dialling in a setup and noticing the changes. I had SK shocks and springs, and added heavier springs and got them revalved by Sydney Shocks to suit based upon what I told them I wanted the car to handle like. I got back a completely different feeling set of shocks, which probably (?) feel great on track but holy hell are they rough on tram tracks and the like. Truth be told I doubt I'd be any faster or slower with either setup, or camber/castor combination. I also had whiteline eccentric castor bushes up front of my R34. I removed them and put in poly non-adjustable ones to soothe my OCD (nobody ever set the castor the same side to side, and it'd be near impossible to do) and be happy the wheel is centered in the well now for clearance reasons. Yes I wanted it to move 1mm 'back' :p I've effectively set my castor back to stock, negating all the benefits of that which is supposedly massive. I can't tell any difference steering the car.
    • You reckon? I have to disagree. Notwithstanding that at some point we may all be forced to do this to our cars if we want to keep driving them, there is absolutely nothing about an electric-converted-previously-IC-car that is ever good. EVs that are built by OEMs on platforms that were originally IC already suck, let alone the shitty outcomes that result from doing it as a retro to something that was actually built as an IC car. This is because the platform really needs to be designed to house the battery in a useful place (ie, down as low as possible) and the motors are properly located relative to the wheels that they have to drive. Converted platforms already suck at this. But when you try to shove sufficient battery capacity into a previously IC car, you can't put it down on/in the floor, because that space doesn't exist. You can't find enough space where the fuel tank used to be (if it is an inboard fuel tank) and you don't want to hang it out behind the rear axle line if you had a rear fuel tank. And there's not enough space in the tunnel if you still want to use it for anything remotely like what it was originally used for. The engine bay is too big for a motor, and you'd really prefer that the motor for the rear wheels wasn't in the front engine bay anyway. And there's not enough room where the diff was for a proper man-sized E motor. And then.... there is the complete lack of soul and emotion that is provided by EVs. There are some cracking restomods out there. Like the Alfaholics GTA thingo. But it is petrol powered. Look at the alternative EV version of a GTA restomod by Totem. it is jaw droppingly beautiful. But by all reports is is objectively awful to drive, despite having 600 HP or something, simply because there is nothing there. It sounds like a sewing machine or a leaf blower. It should scream and wail and make the hairs on your neck stand up. Oh, and it's 1500 bloody kg in a car that was <900kg when new. GTRs are heavy enough as it is without pushing them up to 2tonnes worth of pork.
    • https://www.dezeen.com/2025/01/06/nissan-electric-r32-skyline-gt-r-godzilla-sports-car/   I reckon this is pretty cool. Lots of other Resto mods have turned to ev power.
    • hahaha @joshuaho96 the most action it gets is when I have to drive from West to SE VIC to meet the fam. Even then, it;s on highway cruising speeds
    • don't know anyone in this thread, but i just found it, read the entire thing in a few hours, realized greg is still posting progress, and just have to say, this is awesome. it looks awesome. 100% right about the Uras kit making it a pain to get on hoists...have the same kit on my 34 and it takes six 2x4s and race ramps to do it without taking parts off. this reminds me exactly of this thread. https://grassrootsmotorsports.com/forum/build-projects-and-project-cars/r63-amg-the-unicorn-of-my-destruction/110824/page8/
×
×
  • Create New...