Jump to content
SAU Community

Recommended Posts

finally decided to come around to the nissan side of things

bought a r33 gtr a few months back, starting to drive it now.

I've noticed oil is getting built up in 1 of the pod filters, the other 1 is clean and looks normal.

thinking perhaps and oil catch can would help..... but could be a common problem you guys would know of

any help would be great for my first post :action-smiley-069:

Edited by binga85

Breather pipe that plumbs into the rear rubber turbo intake, from the cam cover is the culprit usually.

When you put more than factory boost in, it tends to happen more. Normally there is a little build up over time...

Then the bovs recirculate the oil blowby mess through the intake and wet AFM's filters etc.

Nismo brought out a oil/air seperator can kit but it's exy, and people usually go the catch can route with breathers.

Cheers guys,

that makes a lot of sense. ill look at changing the seals and finding someone to put in an oil can for now.

would it make a difference you reckon by making a small hole in the rubber pipe leading into the intake pipe just until i have someone fix it up properly?

anyway after the post i thought there is no way i was putting a small hole anyway. so dont worry everyone it just a dumb question wasn't going to do it.

i checked it out yesterday and seals are fine...... sourcing a good catch can now :) if it's mixing with the fuel it'll make sense why it feels like im losing abit of power.

Is the oil on the inside or out side of the filter? Is your engine leaking oil?

I had a oil leak near my power steering which was getting blown by the engine fan over into one of my pods...one pod was clean and the other including the AFM was oily

Just a thought..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven't....but a poorly made one would terrify me. Surely a good second hand one is the go, as they don't work hard and no-one wants to keep one after they are finished with it A big consideration would be the weight of the shell you are putting on it....is it a fully dressed chassis or just the body
    • Not stock. All remade. Mostly looks stock because the pipes run to and from the standard holes in the inner guard to get to the return flow FMIC. I'm not sure which question you're trying to ask, because it seems like "stock position" vs "stock position".
    • Hey, it's a GT-R, it's just as significant a moment as mine😁 It's not ideal when things are uncertain; I'm the type of person that always has a set plan for things in life so being unsure of this plan puts me in a weird place mentally.
    • Hows your intake piping? Are you still running stock? Having in the stock AFM position would mean, if the BOV was shut/venting out, it'd create the almost stalling kind of effect right // "the rich pulse behaviour" due to MAF thinking air is flowing ? But this would be better than having the bov in the stock position + MAF on/just before cross over piping right?
    • Essentially, yes. Although I wouldn't put the AFM on the crossover pipe. I'd want to put it into what amounts to the correct size tube, which is more easily done in the intercooler pipework. I bought a mount tube for card style AFM that replaces the stock AFM - although being a cheap AliExpress knockoff, it had no flange and I had to make and weld my own. But it is the same length and diameter as the stock RB AFM, goes on my airbox, etc etc. I don't have a sick enough rig to warrant anything different, and the swap will take 5 minutes (when I finally get around to it and the injectors & the dyno tune).
×
×
  • Create New...