Jump to content
SAU Community

[Sa] Nissan Cefiro A31 Rb20Det Manual

tsamba

By tsamba,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

tsamba Contributor

tsamba

Posted
Posted (edited)

Black/purple factory manual ceffy, very rare to see a cefiro still in standard condition such as this with low kms. Great base for someone looking to start modding and build their own car. Or great for someone who just wants something a little different for their daily with the power and handling of a sports car, but the practicality of a four door.

This was going to be my project car that I was slowly building up, but now i've decided to get back into full time study so i won't have the time and funds to continue. Its running a very healthy rb20det (not boosted) and reconditioned gearbox.

atm it has:

Work Eurolines

Aftermarket dump and front pipe, but standard cat back exhaust

KAAZ 1.5 way diff

HKS pod filter

Just finished doing a full service and flush. Rear end was rebuilt with new bushes and frame when the diff was replaced. Price is fair considering you will rarely come across ceffy's that haven't seen a track yet. Cosmetics could use some tlc, but mechanically car is great.

I have plenty of parts i can neg with the sale such as:

full pioneer system with sub, amp, 6x9's, 6" and double din dvd player

4" exhaust

pair of reclinable buckets seats with rails

Price is negotiable within reason as it does need some tlc.. basically just make an offer of what you honestly think is fair and im happy to work something out

post-72967-0-12525600-1330440941_thumb.jpg

Edited by tsamba
Link to comment
https://www.sau.com.au/forums/topic/393283-sa-nissan-cefiro-a31-rb20det-manual/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      r34's love to squeal

      By MBS206 · Posted

      And make sure the belts are tightened appropriately too.
    • MBS206
      Rb26 iron block limit

      By MBS206 · Posted

      They care about emissions, and cost the most. Save weight where possible, and make manufacturing easier. Less material also let's the engine transfer heat to water quicker, and bring the engine up to temp quicker, better for emissions and getting them past their warranty period.
    • joshuaho96
      Rb26 iron block limit

      By joshuaho96 · Posted

      I was under the impression the reason why OEMs are going with solutions like relatively thin "right-sized" cylinder walls with technologies like PTWA and open deck is because they care a lot about whatever marginal knock margin benefits they get from that vs the structural rigidity benefits of a closed deck block and thicker cylinder walls. I also see some weird stuff like plastic inserts in the water jacket around the cylinders to try and equalize cylinder wall temperatures. re: the PRP blocks and heads at the end of the day it's hard to know what is and isn't going to work there, just have to see what the initial buyers say about it.
    • GTSBoy
      Rb26 iron block limit

      By GTSBoy · Posted

      Which is why I didn't mention that hardness testing, and specifically mentioned the bore and deck thickness testing. Yeah, not really. The bore temperature will be a lot more even around the top half inch or so, where the material distribution is dominated by the deck, and which is the only place where the bore surface temperature heating any gas in the cylinder is likely to have any effect on detonation. Think about it. Another inch or so down the bore, you might have a hotter spot. The gas there might get a bit hotter, then the piston rises squeezes that gas away from there at high speed and mixes it with other gas from nearby. Instant dilution of the problem. I'd be surprised if it was an issue at any time other than in racing engines or OEM dev engines being run at the ragged edge of tuning. Say what now?
    • joshuaho96
      Rb26 iron block limit

      By joshuaho96 · Posted

      https://dsportmag.com/the-tech/education/engine-tech-material-hardness-testing/ The PRP testing on block hardness I'm not sure how much it actually can be trusted. The thinner cylinder walls on RBs is a bit of a problem vs 2JZ but it really depends on the design goal. Siamesed cylinder bores like a 2JZ cause uneven cylinder wall temps too, which means a bit of distortion induced by that + the hotspot can affect knock margin. Something that actually gives me a bit of pause with the PRP block, whether super thick cylinder walls are going to keep it from being drop-in compatible on an otherwise OEM rebuild. 
×
×
  • Create New...