Jump to content
SAU Community

Recommended Posts

Hey guys.

I am trying to bring my R32 Gtr up to immaculate condition interior wise.

These are the parts i am after. i am after as good as possible quality.

- cluster surround, also indicator stalk surround

- interior door handles and surround

- rear window/roof lining trim

- window top seals

- AC vents middle and left, need to be perfect or i dont want them.

- lots of other little pieices that i cant think of.

The quality needs to be there, this is basically to make my car perfect.

pls pm or post what you have, we can look at photos and go from there.

JD

Link to comment
https://www.sau.com.au/forums/topic/393332-r32-gtr-interior-parts/
Share on other sites

not 100% sure mate.

if you swing me some pics to [email protected] i can have a look see and see whether they will work.

Its more the colours i think that were immediately different and trim quality level.

most of the garnished pillars lining etc should be same same.. also the colour needs to be same as currently in there.

Might need to upload some pics so i can be more descriptive of what im after.

cheers

Hey guys.

I am trying to bring my R32 Gtr up to immaculate condition interior wise.

These are the parts i am after. i am after as good as possible quality.

- cluster surround, also indicator stalk surround

- interior door handles and surround

- rear window/roof lining trim

- window top seals

- AC vents middle and left, need to be perfect or i dont want them.

- lots of other little pieices that i cant think of.

The quality needs to be there, this is basically to make my car perfect.

pls pm or post what you have, we can look at photos and go from there.

JD

i've definitely got a perfect centre vent and a few sets of steering wheel surround plastics off the top of my head.... can have a look for the other bits over the weekend if ou want

i'm in sydney

pete

i've definitely got a perfect centre vent and a few sets of steering wheel surround plastics off the top of my head.... can have a look for the other bits over the weekend if ou want

i'm in sydney

pete

Thanks mate..

would appreciate that.. looking for as close to perfect as possible. think im ok for vents, RHD has then for really cheap brand new so might be easier.

Still looking into replacing the drive shafts. havent forgotten bout your offer. just need time to get the mechanic to have a quick look again and double check.

cheers mate.

Thanks mate..

would appreciate that.. looking for as close to perfect as possible. think im ok for vents, RHD has then for really cheap brand new so might be easier.

Still looking into replacing the drive shafts. havent forgotten bout your offer. just need time to get the mechanic to have a quick look again and double check.

cheers mate.

righto, of all the gtr stuff laying around in the shed it's probably not as perfect as you want it

the centre vent i have is perfect in the sense that it's unbroken and the fins are perfect, but it has a tiny mark on the front

happy to pm a pic if you want to check it out

pete

  • 3 weeks later...

+2 for BIGBOSS. Got some immaculate stuff from him recently.

Check his FS thread he had all the parts you mentioned (in pics).

Maguires also put out a good product to bring trim back to new

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What can't be done with a little bit of decking board or similar timber bolted to a hub flange via 2 wheel nuts is not worth talking about.
    • I noticed something. On the tps sensor and the sensor behind the adjustment screw is adjusted towards the far left. Are these screws supposed to be centered? (this sensor was in the same position before the tune as well)  Also attached a photo of where my car usually idles at when warm (sometimes a tiny bit above that). I think I might have screwed up the calculation and it might have better than I thought lol at 750rpm still not 650rpm though.      
    • So for both general interest of engine health, and to rule out any coolant/oil issues, I organised an oil analysis done on the 125,000klm oil Results below, all good, just a bit of fuel dilution which I'm not too worried about
    • This is actually a really good way of measuring what wheels fit. If only there was a similar measurement between hub face and suspension :p That said, it's probably pretty simple to actually measure it all with the wheel off the car for the rear. The front is a bit more complex but.. 
    • Being the top Google search result for R34 wheel-related inquiries, lemme throw down my experience. I calculated that 100mm from hub face to wheel face is about the perfect fitment for my ENR34 sedan.  I've been running 18x8.5s, ET35, with a 1" spacer. So, 8.5in to mm = 216mm. 216/2 = 108mm. 108-35 = 73mm. 73+ 25 (1" to mm) = 98mm.  If you wanna get close to this on dif widths, here are the offsets you'll want: 9" - ET around 15mm 9.5" - ET around 20mm 10" - you're crazy, but ET around 30mm All these should fit perfectly on a non-widebody, non-GTR Skyline. Note that it's probably the absolute max, and you're probably better off running a couple degrees of camber in this config, but it looks great, super flush.
×
×
  • Create New...