Jump to content
SAU Community

97 Bcnr33 Vspec/ 99 Bnr34 V Spec Build


Recommended Posts

so today i received my Tarzan G Box in the mail, so it was straight down to the garage to put it in.

here is what the kit contains

C2C1F8E6-5F7D-475D-8DF8-85EF6B4CFB8D-7097-00000561CAEFE99E.jpg

unplugged the old sensor and slid the plugs off

7A73055B-C17B-49CF-9F0F-FE9B9DEA5336-7097-00000561E04B60BA.jpg

new one plugged in!!

5584D720-5802-4781-A0A1-FBBE75EE9DE7-7097-00000561F30ED504.jpg

Now that was all well and good but once trying to re fit the centre console, i bumped into my first problem..... the g sensor now sits too high ontop of the standard position. Which stops you from putting in the side screws and if pressed down too hard, pops off the coin holder compartment.

Due to time constraints, i just had to leave it for now and come back to it.

The Test Drive

During normal driving obviously there is no notice at all, its until you press down the accelerator that you really notice the change.

I brought the mrs along to have a second opinion as she loves the R to bits :P

We both confirmed straight away that acceleration has now become a lot smoother, almost so that it feels that the power has dropped back. As there is no longer the hard kick when the turbo's come on!!!

Then through corners it instills courage as the car is noticeably more planted and firm, its almost like you can feel the attessa working more and sending the power where it should be. Also you can tell how much more responsive the torque needle is (even though reading its not really accurate) when sending torque to the front.

Yes the braking feel has also been improved, there is less movement and the weight seems to transfer alot smoother also when getting on the middle pedal.

Lets just say that it put a smile on my face and has change the way the car handles, so i give it a thumbs up. Yes it is a bit pricey, but hey its what cars are about!!

Looking forward to going for my next drive already!!

Link to comment
Share on other sites

  • Replies 102
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I have a couple of negative opinions on the build for this car. It was a pretty clean series 3 except the bonnet at the start. You did the right thing changing it back to factory bonnet. Series 3 is probably so rare that I would expect owners to keep it full factory on the exterior and minimal change on the interior. those blue LED really shouldn't have gone in factory boost and oil temp gauge in the centre...Carbon dash and centre console is kindda ok but Id really still keep it stock unless they are really scratched up. And that front lip is really something there to just ruin the beauty of an r33. A genuine series 3 V spec front lip is more than enough to make your car look mean. With cars like GTRs looks, more is less and less is more. Last but not least, a GTR has to have big power, so save all that effort for making it a fast powerful and RELIABLE weapon. Good luck.

Link to comment
Share on other sites

Interesting views, but it is up to the owner to decide what he does with his own car. If what he is doing makes him happy and its getting closer to perfect in his eyes - that's all that matters.

Some nice features on the car Raimie, keen to see the progress and end result!

Link to comment
Share on other sites

Thanks for all the input guys, Wei- thanks for your input but at the end of the day your view is going to be different to someone else's. I've had ALOT of positive feedback to how the R looks now as photos don't do it justice and hey, not every is in for the clean look. The Japanese time attack/street tuning style is what I aspire to hence the lip. Let's face it how much of that BIG power can you use on the street (where mine is driven 100% of the time) and if it's making big power reliability is another thing all together, plus maintenance fee's. Bit of advice- let people build cars the way they want too, otherwise the scene would be dead and boring.

Anthony I got it through Jesse streeter.

Newest update

BF3D2593-5DEE-4C87-B0F9-FB72A5EF730A-5661-000005004A63960B.jpg

Racepace built R34 is now under my wing

Edited by JDM33
Link to comment
Share on other sites

thanks James, hope to have some new photos of the R's soon!!

:thumbsup:

mods might have to wait till the new year. though there isn't much left to do on the 34

Was that Muztek's 34?

Shame I won't see it around Vic anymore. But you've managed to get a beautiful car!

Link to comment
Share on other sites

  • 3 weeks later...

Bride's have been swapped from 33 to 34.

IMG_2112.jpg

Trying to figure out what i want to do with the 34, performance wise i'm pretty happy, just a few things need changing/updating.

But il keeping the exterior how it is, mostly for now. Went for a cruise recently with some mates, including a 2.4LTR EVO VIII.

IMG_2115.jpg

IMG_2108.jpg

IMG_2107.jpg

IMG_2105.jpg

IMG_2104.jpg

I only just received the San-Yon last week and i just want to drive the thing all day! well thought out mods both inside and out.

Link to comment
Share on other sites

  • 1 month later...

Gee'd up the rear of the R with some Qest LED's this arvo.

IMG_2309.jpg

IMG_2310.jpg

IMG_2312.jpg

after

IMG_2316.jpg

IMG_2318.jpg

IMG_2320.jpg

IMG_2321.jpg

The light is so much brighter and clearer now!!! Gonna look killer at night. Will post better pics once i'm finished with the rear

Link to comment
Share on other sites

Thanks mate :) nismo tail lights have been ordered, just waiting on dispatch- mofo's ain't cheap! Yeah in a way I guess, the sensor is set up to under steer a touch more. But that's only once your really pushing it, with different suspension mods it's a bit hard to compare the two but the sensor has made the 33 a lot smoother to drive and more predictable

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Are these the Dmax ones you are in reference too? https://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35#description Not a bad idea to get the uni flange ones. I have sent just jap an email too. Will see what they say lmao. Only thing is the Dmax ones are on a big back order. Low key anything will be better then my OEM ones I got as they are sounding like popcorn when I go under load lmao 😂☠️🪦.
    • They should do. I have S14 (or something S chassis, anyway) driveshafts in my R32 (because my diff flanges have 3x2). They're the right length. When you go looking for R32/3/4 driveshafts (for turbos), they're all the same thing, so are the same length. So there really shouldn't be any reason why those cheapies from JJ won't also fit an R34. R32/3 NA should also be the same thing. The (3x the price) D-Max ones are uni-fit. They have 5x1 and 3x2 bolt holes and say they cover all the cars. So that would also suggest that they are all the same except for the flanges. And in that case, the flange goes both ways. I'd be buying the D-Max ones if I ever have to replace a shaft. Because that will open up diff options without needing to juggle shafts also. Juggling shafts is gay.
    • Yeah with the adaptors they do look like the photo above - just the fitment within the plenum itself and then further with the rail to the intake is questionable - we shall see tomorrow hopefully once I get some replies from Aeroflow, maybe those bosses are the missing piece....
    • Should be fine, if you have it sitting too far in, you end up just spraying the walls and have shit idle. You "can" run them like that, however I don't think it's a great idea (also depends on your plenum, might be good to just get the injector bosses first, mock it up and see if you need to get the bottom extension) Ideally your injectors, with the extension should look like this  (Not my photos, just Google)
    • Thanks for the replies guys, it's really appreciated.  It seems the kit was supposed to come with those injector bosses but hasn't. Unsure if they'll help as even with the adaptors to make them a 3/4 height injector they still sit too far out so mount the fuel rail?
×
×
  • Create New...