Jump to content
SAU Community

R34 Gtt In Brisbane - 2 Door - Manual - 73,000 Km's


Recommended Posts

08062lj_20.jpeg

3140bil_20.jpeg

8170aja_20.jpeg

688350_20.jpeg

8174km4_20.jpeg

25522ah_20.jpeg

3126972_20.jpeg

cp5161288359837160563.jpg?width=555

Hello all drivers,

This is a much loved 2 door Manual Turbo NISSAN SKYLINE R34 GTT Coupe. I've owned this car since it was imported. The car has been well looked after and is in excellent condition.

Features:

Climate control,

Traction control (can be turned on and off as desired)

SRS Air bags (passenger and driver),

Only 73,000 km's on the clock,

Comes with Road worthy Certificate,

6 months rego,

New Tires,

Clear all titles

With the following Mods:

ADR approved air scooped Carbon Fibre bonnet,

Drift handbrake,

4" exhaust through to extractors,

Oil Temperature, Oil Pressure, Water Temperature gauges,

Nismo Gear knob,

HKS Turbo Timer,

Warlock immobiliser,

Pioneer CD/MP3 player

with Remote,

Apple iPod connectivity,

Hands free bluetooth phone connection with built-in mic

Extra's:

Nissan Consult - used for connecting your laptop to the ECU to view, measure, customise to your hearts content. Can be used for tuning, servicing, diagnosing, dyno, speed tests, etc

I can be contacted on 0401249030 or [email protected]

Out of curiosity what brand of bonnet do you have? I was unaware of any CF bonnets that were ADR compliant.

I don't remember the brand, it was a couple of years ago now when I bought it. It's fibeglass reinforced though, which makes all the difference. (Visible from underneath)

  • 3 weeks later...
  • 4 weeks later...
  • 4 weeks later...
  • 2 weeks later...

No, it's always been manuel, but the steering wheel has been changed on it. It came from Japan with a momo steering wheel. But to register it here, in needed the airbag. So I had to get that steering wheel fitted.

  • 2 months later...
  • 2 months later...


  • Similar Content

  • Latest Posts

    • Any number of different ways. Have the coils draw sufficient current to provide contact wetting. Use different contacts in the switch, either by material or design, better suited to the low current drawn by a relay coil. Etc.
    • Hmm, how does the R34 manage to have headlight relays then without getting excessive carbon buildup on the headlight switch contacts?
    • Not R7R. Meant to type R&R, obviously enough.
    • Bugger "making it look stock". I put one conventional internally fused Hella relay behind each globe. I just pulled the plugs off the back of the globes and built new loom segments with male and female plug parts to match up to the original loom and the globe, and used the original power wires to each globe coming from the switch through the original loom plug to trigger the relays. Ran a big fat (also separately fused) power wire across the front of the car to feed all the relays. It's as ugly as f**k, but it is wedged down between the headlight and battery on the RHS and the airbox and headlight on the LHS, and no-one ever looks in my engine bay, and on the odd occasion that they do I simply give no f**ks for what they think. Fully reversible - not that you'd ever want to. For f**k's sake. It's a Skyline. They made million of the bloody things. We've been crashing them into roadside furniture for 30 years now. There is a negative side effect to putting relays on the headlights. The coil current is too little to properly clean the contacts in the switches and they get blacked up and you have to open them up every couple of years and clean them manually. I have 25 years of experience on this point.
    • I was poking through the R34 wiring diagrams vs R33 and noticed that the R34 has proper headlight relays while the R33 is like the R32 and sends full headlight power through the headlight switch. I'm not afraid of wiring but I really would like to do this in a way that looks OEM (clipping into open positions on the OEM relay box) and also unlike the factory wiring which interlocks the high beam and low beam on the halogen series 1 GTR headlights I want to make it such that turning on the high beams keeps the low beams on as well. Any advice on how to locate the specific connectors + crimp terminals + relays I need? I was thinking one NO relay for low beams and another for combined high + low running off the factory high beam headlight connector. I don't really want to splice into a crusty old probably discontinued factory harness so fully reversible is my goal here.
×
×
  • Create New...