Jump to content
SAU Community

Recommended Posts

ok.. have an r32, rb25.

just removed microtech and replaced with standard ecu.

Problem:

dies under load, dies around 3 k depending on load. (it free revs fine)

dies when u take the next gear up.

*by saying it dies i mean it leans out so bad it doesnt run.

What i had already tried/found out.

-replaced fuel pump with a working walbro fuel pump (wired earth and power straight to battery with no difference)

-CAS timing needs to be set to full advance to get 15deg

-tried 3 different rb20/rb25 green AFM's

- converted wiring loom to run r33 s2 coil packs. runs on 6 cly fine.

- fuel is prob a bit old, but ran fine before ecu swap.

-knock sensors are not plugged in ( wired 1 to both pins quickly as it was easy to get to buy dont think it made much difference)

really dont know what to look at from here..

Edited by flame_this
Link to comment
https://www.sau.com.au/forums/topic/393815-rb25-dies-under-load-lean-out/
Share on other sites

I have seen the weird cas adjustment before, check the bracket that holds the cas to the head, see if its cracked. Can u borrow a cas from someone to try, is ur coolant temp sensor wired in to the stock ecu

When I say lean out I don't have the wideband set up on this car but left like a fuel cut, which it turned out to be.

The . The next gear thing feels similar, massive stutter, no black smoke or popping, engine just feels dead.

I'll check the coolant temp sensor, that sounds plausible :-)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have two German Shepherds that like to bite things that are in places they shouldn't be. Plus the cars/batteries on chargers are inside a locked garage, inside that fully fenced and locked yard. If you can get the car out, you can have it, as I'll be having one hell of a laugh at your expense.
    • Looks like they changed the wording in the manual for the new model. I have a different model. Mine is CC1206. Not CC1206-XLI. Mine doesn't support lithium at all. I can't find the manual for my model online and they don't list the model on the Century website anymore either. In my manual it says what I quoted and that they recommend to not leave it on 🤷‍♂️ Sounds like you'd be fine with this one now.
    • Thanks for actually answering every single point! I noticed the date only after posting. And yes, looks like things have changed a little bit since then. FWIW, looks like Government Gazette No 253 has the current emissions test procedure. Sounds pretty reasonable altogether. One thing I learned from this is that it's possible to check whether a catalyst does any work by measuring the temperature. Catalyst outlet temp is at least 40°C higher than inlet temps if there is a reaction happening. I'd be curious to check this on mine but don't have a thermometer. Because purely going by smell it can't be doing much. Personally I'd be okay to pay for the test as long as it's within reason. My main concern would be to lose my rego because it definitely wouldn't pass the test in its current state. I'll see if I can do a bit more digging and see what's involved in doing this nowadays.   To be fair I don't think it's stopping many people from doing the modifications anyway. It just puts a barrier up to doing things right  
    • Uhhh if anyone sees this - I bought a BRZ years ago, on my fulls soon so back on the market for the R34!
    • Research research research, and tackle the important things first, like the rust, because as a wise old hippie and some crazy horses once said "rust never sleeps" Nothing good comes easy and fast, and nothing that comes easy and fast is typically good
×
×
  • Create New...