dropeds13 Posted March 7, 2012 Share Posted March 7, 2012 How's it going guys my rb25 blew last summer the timeing belt broke mashed the head up and broke a pistion so I finaly have a new head and the money to rebuild the engine. I'm from the US but the fourms here suck as far as rb knowledge goes. So I'm shooting for 500rwhp in a s13 this is a list of parts I plan on useing to get me there if you all could let me know what's needed and what's not or a better way to get the best bang for my buck let me know thanks in advanced. Arp head , main, and rod studs / acl main and rod bearings / isis intake manifold / either cp or wisco pistons / and either eagle or manly rods / z32 Maf with a q45 throttle body / stock exhaust manifold with tial 44mm external waste gate / holset Hx35 / as for head gasket I'm looking at the cosworth or the apexi and I'm running a apexi power fc/ for fuel injectors 1000cc not sure if that's over kill or not please let me know / and I'm running a z32 twin turbo fuel pump Link to comment https://www.sau.com.au/forums/topic/394072-rb25det-rebuild-help/ Share on other sites More sharing options...
Rolls Posted March 7, 2012 Share Posted March 7, 2012 500 US hp could be done on a stock motor if you wanted to. Link to comment https://www.sau.com.au/forums/topic/394072-rb25det-rebuild-help/#findComment-6265849 Share on other sites More sharing options...
KiwiRS4T Posted March 8, 2012 Share Posted March 8, 2012 You're going to be spending a fair bit of money so you'll want to get it right first time. I would suggest it worth your while to have a good read of this thread: http://www.skylinesa...s-engine-build/ My only quick suggestion is that for 375rwkw you will want something better than the stock exhaust manifold e.g. a 6 boost or a Sinco customs one: http://www.sincocust...20Fabrication/2 http://www.6boost.com/ Also have a read of the thread at the top of this page: dyno results for RB25 upgrades http://www.skylinesa...l-dyno-results/ Guys in NZ are getting good results with Holset turbos but I don't know the capabilities of the one you are proposing to use - what is its mamimum output? And is the fuel pump brand new? I would want a new pump such as a Denso at least.I would prefer a more modern ecu such as a Link but if you already have the PFC it will be fine. Link to comment https://www.sau.com.au/forums/topic/394072-rb25det-rebuild-help/#findComment-6266052 Share on other sites More sharing options...
R31Nismoid Posted March 8, 2012 Share Posted March 8, 2012 Don't bother spending too much on a rebuild (pistson & GTR rods only) if you are going to put HX35 paperweight on the side of it. As in - no point having a banging motor with a junk turbo Link to comment https://www.sau.com.au/forums/topic/394072-rb25det-rebuild-help/#findComment-6266150 Share on other sites More sharing options...
Rolls Posted March 8, 2012 Share Posted March 8, 2012 Recommend reading the dyno thread and seeing what similar people have used to get their results. Remember your 500hp is generally less than ours, also not sure if you guys measure at wheels or translate to at the flywheel, but take that into account. Link to comment https://www.sau.com.au/forums/topic/394072-rb25det-rebuild-help/#findComment-6266154 Share on other sites More sharing options...
dropeds13 Posted March 8, 2012 Author Share Posted March 8, 2012 To (kiwi) the max output of the holset is 60lb/ per min the trucks they use them on run 32psi all day so I figured it would work for what I'm wanting and I do plan on going with a 6boost I'm waiting for a group buy to come up or one for sale on our fourms here in the us. To (rolls) most of us dyno our cars at the wheels but I do know our HP rating seems to be higher than most other places I just figured we tac on the extra HP for the amercian ego trip lol. Link to comment https://www.sau.com.au/forums/topic/394072-rb25det-rebuild-help/#findComment-6266275 Share on other sites More sharing options...
Rolls Posted March 8, 2012 Share Posted March 8, 2012 A truck engine isn't a skyline engine. Totally different rev range, flow rate, pressure ratio blah blah. Read the dyno thread, see what worked for other people and duplicate it. Garret gt3076 is good for 300kw ish which imo for a 2.5L would be the max you'd want before the lag starts to get serious. You can do that on a stock motor, or a built motor with cast pistons if it is tuned correctly. If you want to build a motor just buy a full rb30 from rips, do it once do it properly, 3L and it will probably cost almost what you'd pay to rebuild yours a few times after the first time it grenades because the builder wasn't experienced. Link to comment https://www.sau.com.au/forums/topic/394072-rb25det-rebuild-help/#findComment-6266308 Share on other sites More sharing options...
dropeds13 Posted March 8, 2012 Author Share Posted March 8, 2012 Ok (rolls) I under stand that but please look into the holset for the price of it you can't beat it I've researched it many times that's why I went with it!!!!! I'm sure I will change the turbo when I can afford one but then again I don't want my car to be a dyno queen Link to comment https://www.sau.com.au/forums/topic/394072-rb25det-rebuild-help/#findComment-6267334 Share on other sites More sharing options...
R31Nismoid Posted March 8, 2012 Share Posted March 8, 2012 What research did you actually do? The holset is possibly the laggiest turbo for the power you could use... There are NO decent results around anywhere that I've seen. I remember doing some digging mid last year as someone else from the US was wanting to use one, all the results were just ridiculously laggy and they were on 3ltrs (2JZ). Link to comment https://www.sau.com.au/forums/topic/394072-rb25det-rebuild-help/#findComment-6267400 Share on other sites More sharing options...
Lithium Posted March 8, 2012 Share Posted March 8, 2012 What research did you actually do? The holset is possibly the laggiest turbo for the power you could use... There are NO decent results around anywhere that I've seen. I remember doing some digging mid last year as someone else from the US was wanting to use one, all the results were just ridiculously laggy and they were on 3ltrs (2JZ). Seriously? I've seen and know people who have got awesome results with HX35s... from WAY back, if I could talk to the guy I was in 2006 I would tell myself that my initial preference of going an HX35 on an aftermarket manifold instead of the the internal gated stock mount GT3076R for slightly cheaper would have probably been the better way to go. Link to comment https://www.sau.com.au/forums/topic/394072-rb25det-rebuild-help/#findComment-6267438 Share on other sites More sharing options...
R31Nismoid Posted March 9, 2012 Share Posted March 9, 2012 Yeah seriously! I'll do some digging and find the thread in a few days so i can workout when it was, then find the sites i was looking at Feel free to chuck up some if you have em (sounds like ya do)! Link to comment https://www.sau.com.au/forums/topic/394072-rb25det-rebuild-help/#findComment-6267785 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now