Help With 550Cc Injectors

[2000 RS]

I have a high flowed turbo gt 30/76 going in soon, allready have my ecu nisstuned. What i need some help with is a direct drop in set of injectors, I have a z32 afm with plug also waiting to go in, from what I've heard my turbo is only good for 280rwks on a manual. So I'm thinking 550cc is good for my application? What should I buy? Any help would be appreciated.

[KiwiRS4T]

Neo motor? ID1000s would go well. If you get the right supplier they should be able to supply straight drop in for your top feed rail set up.

[4bidn1]

550cc 750cc would all be good if your running pump fuel. try injectors on line if your running e85 then go 1000 or 1200

[2000 RS]

hey guys and girls, i ended up getting bosch ev14 1000cc injectors with wiring plugs from tuffcarparts.com. Apparently there a direct drop in for the s2 rb25det neo, can anyone confirm this? car goes into boostworx tuesday to get everything done. Retune of the nisstune new turbo gt 30/76 new injectors new fuel pump new 200 flow cat z32 afm. Hoping to come out with 250rwks as i have an auto stag....

[KiwiRS4T]

double post

[KiwiRS4T]

The injectors will be fine but dependant on the right bits and pieces which hopefully have been supplied correctly. Even with your auto that turbo should be able to churn out 280awkw but 250 or better will will be fast! Have you got 3in or better turbo back exhaust? What fuel pump did you get - and did you get it directly wired for full battery voltage?

[2000 RS]

turbo will put out 280, but my auto trans will suck up 30 odd kws. i have a full 3 inch zorst and im going for the bosch 040 fuel pump. boostworx are throwing the pump in so not sure how they will wire it up.

[jet_r31]

Cool, some more fast C34's in adelaide...

cheers

darren

[4bidn1]

youll make 250rwkw easy mate i made 244rwkw on low boost (14-15 psi ) through an auto with a 3076r so if ya ran 18 you think you would expect at least 260ish and thats fun in a stag he he.

[4bidn1]

Cool, some more fast C34's in adelaide...

cheers

darren

yeah reckon there will be a few coming out of the wood work over the next 6 months hey daz