Jump to content
SAU Community

Recommended Posts

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Resident ex-pat Brit Dave might be able to help... any of the vehicle importers will be able to source and import an AE86 to England I'm sure. Dave, know of any UK based importers topi could try?

I know this may not be the right forum for Toyotas, but you cant deny the greatness of the AE86.

I cant seem to find any for sale and im interested in importing one. Can anybody point me in the right direction? Oh and I want a slightly tatty and abused one.

greatness=denied

Topi - As Evo_Lee said AE86's have held their value well...too well and given the age/condition of most of them, they're way over-priced IMO. While they are THE classic drift car, be aware most are well passed their prime and had a hard life. Finding a clean example is tricky, and their popularity means they command a premium.

I'd also be concerned about the availability/cost of parts for them back in the UK. Might be wise to check that out before you commit. As for where to buy, I haven't seen many for sale - the best place would be the auctions or try checking out local garages in the area you're staying. I'd highly recommend being able to thoroughly examine any car before you commit to buying it.

If you're definitely not going to use an importer (though I would recommend Newera if you're in the UK) then the best place to get info on self imports would be the GTROC UK. Have a look at this thread and this one to get you started. You need to check on the specifics for the AE86's regarding sva, but being over 10 yrs old you shouldn't have any probs...

Dave

As for price - varies a lot dependant on number of bumpers they've had :(

Seriously, had a brief look on Yahoo Auctions Japan (not the best place to get a used car, cheaper than a dealer but much more risky) and I found these:

mym_hyd-img600x450-108140261286-1.jpg

mym_hyd-img600x450-108140261786-2.jpg

with a reserve price of 650,000 yen.

or this, with 160,000KM on the clock going for 300,000 yen:

car_spiral-img600x450-1080024647dsc00564.jpg

car_spiral-img600x450-1080024792dsc00566.jpg

Again, I'd highly recommend an importer or having someone familiar with AE86's be with you to check the car out before you hand over any money...

If you do decide to get one, it'd probably be a good idea to source a set of spares for it (filters, belts etc) while you here too.

Newara oooooh exxxpensive.

Thanks for looking Dave ,that top one works out to just over £3000!

The other works out too £1400.

I see what you mean about them being over priced. Look nice though dont you think?

I think id deffinatly be after a slightly abused example. Im not scared of fixing things and I have alot of help at hand so id rather buy cheap, fix later.

Or even, get one like that poor abandoned hachi near Rezz'z (ill keep my hands in my pockets lwells) , As i can get the engine out of this AW11 MR2 that i know is about ready for the scrapyard.

If you can easily import cars from Australia, a good friend is selling his AE86 trueno (and its even Panda too!). Its commanding a reasonably high price though, as its in pretty good condition for its age (its a 1985 build) and has some substantial modifications (ae92 4AGE converted from EFI to carby, twin dual 45mm solex carbs, hks camshafts, hks intake manifold, rsr extractors, exhaust, cusco lsd, cusco coilovers, bb garage front bar, roll cage, etc etc, was setup as a full track car).

Pictures can be found at http://members.optusnet.com.au/~mlighty/

why would you want one anyways
Light and compact FR car with legendary tail-out biased handling??? I agree, they're too expensive, but thats what happens when demand outstrips supply (or lack of)... just like my oldskool Nike Air Max 90's...

I cheap way of doing it is to get an Aus delivered sprinter and drop all the nice Japanese bits in it. Unfortunately we don't get the nice pop-up light Trueno front end (only Levins here :) ), but you can get the panels/lights and retrofit them.

Rezz: That AE86 still sitting there? :(

LW.

what a waste of a car. :) When I first began working here, at one of our branch schools there was a smart looking supra in black parked across from the building that never moved for over 2 years...

I figured maybe the engine was f00ked, but even so the body/interior looked mint. It sat there rotting until eventually someone moved it right before the carpark was demolished and a Daily Store built there. Was very tempted to try and contact the owner and take the car off his/her hands...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Starting with issues 1 - 5, we have already run into a problem...!  Issue #4 contained 2x front brake calipers, instead of 1 caliper and 1x steering knuckle. Will have to call DeAgostini on Monday to sort it out. Anyway here's some photos.  Issue #1 is the front bumper, headlights and number plate. Issue #2 is the front wheel (with "We produced with spartan air." text on the centre cap!) and tyre, the front lip spoiler and cylinder head cover with ignition coils under the centre cover... which will never be seen again. Issue #3 is the bonnet and cylinder head. Issue #4 is the front strut, brake disc (with laser etched metal discs) and brake caliper. I stopped here because of the issue with the missing steering knuckle.  Next update will be #5 - #10 in a few weeks.
    • DeAgostini is one of a few companies that release quite large (the largest commonly available size actually) 1/8 scale models in a series of weekly issues over 100 - 110 instalments.  They release different models for different markets and DeAgostini Japan have release the BNR32 Skyline GT-R Nismo last month. I've made two of these 1/8 scale sized cars (one an R35 GT-R from 2012 - 2014, the other I'm just about halfway through, a BNR34 Skyline GT-R from the 2Fast 2Furious movie) so when this R32 was announced there was no way I could ignore it as it's my favourite out of all Nissans.  Each issue costs around $20 so it costs about $2.2K when completed. I suppose it is very expensive for what it is, but the quality and details are really very good, and there are many "gimmicks" like fully functioning exterior and interior lights operated with a remote control, working steering, all doors/bonnet/boot/fuel lid open and close, the side mirrors fold in and it even has a speaker for the engine revving sounds when you turn the lights on.  Each issue comes with a magazine that tells the story of the BNR32 Skyline GT-R Nismo from the first design stages of the BNR32 to Group A homologation and the various racing version that were run in the Japanese Group A and JGTC, and Australian Group A.  So I plan to update the build in this thread 5 issues at a time.  https://deagostini.jp/r32/?srsltid=AfmBOooKjxDc4EUK2rmXqMBPgyHfFJ24s4oEPJBNpnF-lFlsRoW0PE6P
    • As per title.. has anyone used so far? Keen to hear results, comparisons. In the market for a new mani for my new turbo. Any issues cracking?
    • Re read everything that has been written about this in this thread.. Let us know if you're still confused.
    • This would be a new pump with new gears. I'm just unclear on whether it's a good idea to run more oil pump flow if you don't actually need said flow. Oil level is set a minute or so after shutting off a warm engine so wouldn't the high RPM oil level in the sump end up lower all things equal? Plan is OEM clearances, main concern in my mind is whether the OEM pump can keep up with the flow requirements of any additional oil coolers.
×
×
  • Create New...