Jump to content
SAU Community

Recommended Posts

Get underneath and twist the tie rods/rack ends; I bet there's a clunk. I just had an alignment on mine, and this has disturbed the inner rack ends; which have developed a knock.

They appear to be the same as V35 and 350z rack ends from my search of common part numbers. Can anyone confirm?

V35/350Z ball joints are the same. I've just had mine fitted and the car feels amazing.

eBay is the place to get them. Nissan will only sell the entire setup, at $800/side.

I also checked Ebay but with no luck finding them today

You need to get a computer. It'll make things much easier compared to trying to use your phone. Not trying to be an asshole, just trying to help!

Pretty sure this is where I got mine from, but with the exchange rate they're cheaper now: http://www.ebay.com.au/itm/2-FRONT-LOWER-BALL-JOINT-NISSAN-350Z-03-09-/250697175942?pt=Motors_Car_Truck_Parts_Accessories&hash=item3a5eb75386#ht_863wt_891

You need to get a computer. It'll make things much easier compared to trying to use your phone. Not trying to be an asshole, just trying to help!

Pretty sure this is where I got mine from, but with the exchange rate they're cheaper now: http://www.ebay.com....86#ht_863wt_891

How long did they take to arrive? I'm looking at getting my rack ends through him.

is there a front and rear set of these?

cos I can occasionally hear clunking from the rear...

Let me know if you locate the clunking at the rear. Mine started making a clunking noise a month or so ago & unable to work out what it is. Seems totally random, not just turning a particular direction, accelerating, decelerating, bumpy or smooth road - can't get a handle on it. Audible from outside too.

Edited by Commsman

How long did they take to arrive? I'm looking at getting my rack ends through him.

Less than a week. Pretty happy all round with them - very quick (coming from Taiwan) and very cheap).

Isn't the rear clunking normally the sway bar links/mounts?

Less than a week. Pretty happy all round with them - very quick (coming from Taiwan) and very cheap).

Isn't the rear clunking normally the sway bar links/mounts?

That's pretty good then. Looks like I'm placing an order.whistling.gif

Sway Bar mounts & links are normally fairly repeatable; they either do, or they don't. They also load & unload fairly regularly, so they tend to be fairly vocal.

There is a ball joint in the upper "A" arm in the rear, the rest is bushes. Shouldn't be too hard to apply some leverage to the arm to check for noise.

Let me know if you locate the clunking at the rear. Mine started making a clunking noise a month or so ago & unable to work out what it is. Seems totally random, not just turning a particular direction, accelerating, decelerating, bumpy or smooth road - can't get a handle on it. Audible from outside too.

Mine is exactly the same...random...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's a short. Find the short. It will be somewhere between that fuse and the headlight. Start by removing the plugs from the back of the headlight and dimmer switches, and measure resistance to earth. Supply side (power from the fuse) should have none. The other side should have resistance compatible with whatever globe(s) is there (which is relatively easy to say for a normal globe, perhaps not as easy to say for LEDs). Anyway, if you have very low resistance, you defo have a short. Then you just have to run the wiring like you're running the bowel of a dog (on the operating table) that has swallowed something it wasn't supposed to.
    • Hey guys, need help figuring out why my driver side (RH) fuse 15amp keeps blowing. The Driver Sides Headlamp is out, i replaced these a long time ago with LED ones that were working for 1-2 years. Now, the driver side light is out and i traced it back to a broken fuse. I replaced the 15 amp fuse in the engine bay and as soon as i flip the headlight on, it blows the new fuse. Any idea what's going on?
    • I found the same with Subaru’s.  I own and love the SG9 Forester, after that model 2008+, Subaru threw the ugly stick at all their line up and somehow managed to make them look worse with every succeeding year.  lol
    • It's something we all have to consider as time marches on. Also consider lifted rally MX5 conversion at that point.
    • I should be fine for a few more years, whilst I do have arthritis I also exercise and do mobility training every day to keep as fit and healthy as I can, military life, which is the actual cause of most of my joint issues, has set daily regimes, which I weirdly enjoy I also train alot smarter now, not really focusing on lots strength or puffy muscles, I'm more focused on maintaining what I have for my future older self, I actually train as much mobility now as I do exercising Check out this "simple" drill I have been doing daily prior to training now for a while now, this has worked wonders in my all round mobility   
×
×
  • Create New...