Hanaldo Posted October 6, 2012 Author Share Posted October 6, 2012 Yeh they here a bit slow yesterday as well. Better today, everyone has discovered that the 'speed limit' isn't actually enforced haha. Will upload more vids tonight Link to comment https://www.sau.com.au/forums/topic/394599-hanaldos-r34-gtt-skyline-build/page/13/#findComment-6566971 Share on other sites More sharing options...
Hanaldo Posted October 6, 2012 Author Share Posted October 6, 2012 (edited) Did this to my front right guard yesterday in an off-track excursion. Coming around the last corner I dropped 3rd at 6000rpm, looped out off the track. Car must have bounced when I came off, tyre caught the guard. Re-rolled it using a 3/4 drive The paint is quite damaged but I can respray that again, but unfortunately the guards lines have been distorted when it was twisted. So considering just replacing the whole guard. Happy to say that is the worst of the damage from the weekend though, car LOVED it Didn't miss a beat. Water temps never moved above 85 degrees, oil temps much the same. Haven't driven the car like that for a VERY long time, forgot how much I missed it! Also had this happen this morning after my first run: Genuine Apexi pod filter, bit too much vacuum. Edited October 6, 2012 by Hanaldo Link to comment https://www.sau.com.au/forums/topic/394599-hanaldos-r34-gtt-skyline-build/page/13/#findComment-6567502 Share on other sites More sharing options...
Hanaldo Posted October 6, 2012 Author Share Posted October 6, 2012 Vids as promised: Link to comment https://www.sau.com.au/forums/topic/394599-hanaldos-r34-gtt-skyline-build/page/13/#findComment-6567503 Share on other sites More sharing options...
Hanaldo Posted October 6, 2012 Author Share Posted October 6, 2012 Link to comment https://www.sau.com.au/forums/topic/394599-hanaldos-r34-gtt-skyline-build/page/13/#findComment-6567504 Share on other sites More sharing options...
Hanaldo Posted October 6, 2012 Author Share Posted October 6, 2012 Link to comment https://www.sau.com.au/forums/topic/394599-hanaldos-r34-gtt-skyline-build/page/13/#findComment-6567505 Share on other sites More sharing options...
10 4 Posted October 6, 2012 Share Posted October 6, 2012 Glad to see your car working again Link to comment https://www.sau.com.au/forums/topic/394599-hanaldos-r34-gtt-skyline-build/page/13/#findComment-6567515 Share on other sites More sharing options...
Hanaldo Posted October 7, 2012 Author Share Posted October 7, 2012 Cheers dude, needs moar fast though Gotta get onto sorting out the restriction. Link to comment https://www.sau.com.au/forums/topic/394599-hanaldos-r34-gtt-skyline-build/page/13/#findComment-6567863 Share on other sites More sharing options...
Jeremy93 Posted October 7, 2012 Share Posted October 7, 2012 I remember seeing a white 34 on the track and was thinking it was you, thing sounds so mean man! Link to comment https://www.sau.com.au/forums/topic/394599-hanaldos-r34-gtt-skyline-build/page/13/#findComment-6568217 Share on other sites More sharing options...
Hanaldo Posted October 7, 2012 Author Share Posted October 7, 2012 Thanks man As always, Powercruise has inspired me to do more. I'll get onto finding the missing power now, but unfortunately my tyres are almost down to wires now, so will have to spend some money there. Also thinking of ditching the Sparco seats and getting some Brides, the Sparco's have a bit of movement in the back rest which is getting a little annoying on boost So it might be awhile until I can do more serious upgrades Link to comment https://www.sau.com.au/forums/topic/394599-hanaldos-r34-gtt-skyline-build/page/13/#findComment-6568422 Share on other sites More sharing options...
B-rice Posted November 27, 2012 Share Posted November 27, 2012 damn dude some of your images are not working any chance you could update them please Link to comment https://www.sau.com.au/forums/topic/394599-hanaldos-r34-gtt-skyline-build/page/13/#findComment-6643001 Share on other sites More sharing options...
Hanaldo Posted January 24, 2013 Author Share Posted January 24, 2013 Alright, bout time for some sort of update! First of all, apologies for the photos that are no longer working, I have no idea how to fix them Secondly, I'll start with the small stuff. Bought some goodies from the carbon fibre group buy on here a few months ago; a cf headlight intake and a cf rad cooling panel. Not fitting the headlight just yet for obvious reasons, that will be for track and Powercruise duties. But here is the cooling panel: Now, last time I posted I mentioned a bit of play in the backrest of my seats. You can see in the videos of me at Powercruise that they were already not sitting in the right position (I'm not actually a Commodore-spec bogan). That escalated pretty quickly, and went from small movement to just outright snapping. Driving home from a mates place one day, full boost in 2nd, all of a sudden the seat gave way. Not a fun feeling. Anyway, the seat was then totally reclined and refused to stay upright. This happened about 2 weeks before I left on my 6 week holiday to Europe. So I decided I couldn't be farked wasting that time on the car, parked it in the garage and left it there until I got back on the 5th. Did a bit of research on replacement seats when I had the time, was pretty keen on getting a pair of the copy Bride Low Max Gias II's from the group buy section on here. BUT, I talked myself out of going copies again, as I wasn't keen on having a repeat of what happened to the Sparco copies, and I was actually worried about having mates in the car in the event of a car accident. So I eventually decided to purchase a pair of genuine Sparco R505's from Concept Racegear, who were very helpful. 5 days later, this arrived: Containing these: The quality of these things is just outstanding, they are absolutely rock solid, very very comfortable and look amazing. They're not light though, they weigh a good 20kg's each, not including the rails. However, as they are a universal seat, they weren't exactly bolt in using the Recaro rails. But they were pretty straight forward. First, I bolted the rails into the car and measured the gap between the bolts holding them in place, which was 400mm. Then I measured the gap between the holes in the rail mounts on the Sparcos, which were 340mm apart. So. Small problem. But easily rectified. This is how they were: I then re-measured, before drilling and tapping holes where I needed them, like so: It then took a bit of work to make sure the rails were perfectly parallel, but also not too hard to sort out. From there it didn't take me long to have them in the car, though I did have to retap the threads in the floorpan after doing a good job of the bolts on their way out But that bit of fun aside, here is the final product: They are a tight fit in the car, so perfect that one finds it hard to believe they are universal and not made for it! Anyway, that's where the car stands at the moment, driveable again at least. Unfortunately having just graduated from Uni and job opportunities looking bleak, further modifications are going to have to wait for a bit But I no longer have any excuse to not get the car down to the drag strip, so I plan to go and get some time slips next week to see how close I actually am to this power figure! Link to comment https://www.sau.com.au/forums/topic/394599-hanaldos-r34-gtt-skyline-build/page/13/#findComment-6721539 Share on other sites More sharing options...
turboedsloth Posted January 24, 2013 Share Posted January 24, 2013 Nice looking seats Martin. How do they go moving backwards and forwards? Do they hit on the b pillars at all? Link to comment https://www.sau.com.au/forums/topic/394599-hanaldos-r34-gtt-skyline-build/page/13/#findComment-6721677 Share on other sites More sharing options...
Hanaldo Posted January 24, 2013 Author Share Posted January 24, 2013 Nah they don't hit the pillars at all, have full range of movement. They really do fit perfectly haha. The only issue with moving is the Recaro rails aren't 100% correct in their fitment, so it takes a bit of effort to get them to sit parallel once you torque the bolts up, otherwise they are very stiff. Haven't got that quite right yet, but they are close enough for now, I'll sort em out later. Link to comment https://www.sau.com.au/forums/topic/394599-hanaldos-r34-gtt-skyline-build/page/13/#findComment-6721736 Share on other sites More sharing options...
BakemonoRicer Posted January 24, 2013 Share Posted January 24, 2013 F**k your car sounds good!!! Link to comment https://www.sau.com.au/forums/topic/394599-hanaldos-r34-gtt-skyline-build/page/13/#findComment-6721842 Share on other sites More sharing options...
Hanaldo Posted January 24, 2013 Author Share Posted January 24, 2013 Haha cheers Benji Link to comment https://www.sau.com.au/forums/topic/394599-hanaldos-r34-gtt-skyline-build/page/13/#findComment-6721850 Share on other sites More sharing options...
34GeeTeeTee Posted January 24, 2013 Share Posted January 24, 2013 Pics look heaps better on PC then on the phone man! Well done! I guess that means i should really do some work on the 34 and do some updates then huh? Link to comment https://www.sau.com.au/forums/topic/394599-hanaldos-r34-gtt-skyline-build/page/13/#findComment-6722030 Share on other sites More sharing options...
wedge_r34gtr Posted January 25, 2013 Share Posted January 25, 2013 Damn Martin, those seats look awesome. Now that i'm in WA i'm really going to have to get a look at this car one day. I guess that means i should really do some work on the 34 and do some updates then huh? Yes you should...need mor vidz of skidz!!! Link to comment https://www.sau.com.au/forums/topic/394599-hanaldos-r34-gtt-skyline-build/page/13/#findComment-6722378 Share on other sites More sharing options...
Hanaldo Posted January 25, 2013 Author Share Posted January 25, 2013 Damn Martin, those seats look awesome. Now that i'm in WA i'm really going to have to get a look at this car one day. Cheers mate How long are you in Perth for? I'm planning on getting down to Whoopass next Wednesday, provided the car doesn't attempt suicide again before then Pics look heaps better on PC then on the phone man! Well done! I guess that means i should really do some work on the 34 and do some updates then huh? You've done enough work, let me catch up! Link to comment https://www.sau.com.au/forums/topic/394599-hanaldos-r34-gtt-skyline-build/page/13/#findComment-6722394 Share on other sites More sharing options...
34GeeTeeTee Posted January 25, 2013 Share Posted January 25, 2013 Cheers mate How long are you in Perth for? I'm planning on getting down to Whoopass next Wednesday, provided the car doesn't attempt suicide again before then You've done enough work, let me catch up! NO NO NO NO Suicide! Haha yeah well i might have to make mine pretty and compete Link to comment https://www.sau.com.au/forums/topic/394599-hanaldos-r34-gtt-skyline-build/page/13/#findComment-6722446 Share on other sites More sharing options...
wedge_r34gtr Posted January 25, 2013 Share Posted January 25, 2013 Cheers mate How long are you in Perth for? I'm planning on getting down to Whoopass next Wednesday, provided the car doesn't attempt suicide again before then You've done enough work, let me catch up! It seems to be content on just eating guards for the moment... I'm in Perth for few years at least ...I mooved there from Newcastle just before christmas I'm up north next Wednesday... ...so another time guess...preferable when my cars finsished so i'm just spectating lol. Link to comment https://www.sau.com.au/forums/topic/394599-hanaldos-r34-gtt-skyline-build/page/13/#findComment-6722514 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now