Jump to content
SAU Community

Eoi: Stripping 300Kw+ R33 Gtst

SkyHi_33
 Share

Recommended Posts

SkyHi_33 Mentor

SkyHi_33

Posted
Posted (edited)

EOI

Basically, thinking of stripping my r33, there are a lot of parts, aftermarket and standard. I will list some of the major items and if anyone is interested please PM me and if I get enough interest I think ill let the memories go and start pulling it apart. The car was never completed, everything is mostly bolted on however never started or tuned as I started working a lot and the whole project went out the window. Now I'm trying to move up with my career and just don't have the time for it anymore.

I am open to offers on all parts.

rb25det s1 motor, complete minus turbo/manifold etc, compression 145-160 on all 6 cylinders - $1500

(made 194.6kw with std. turbo on 12psi with full exhaust and intercooler so very healthy)

rb25det s2 gearbox 86,000kms on it - $1500 or as a manual conversion kit $2000 (everything you need)

HKS GT2835r turbo (420hp rated, seen couple track days since rebuild made 290rwkw on another car) kit including HKS cast manifold, Greddy ext. gate, screamer pipe, dump pipe, steel braided lines, turbo intake and hot+cold side piping in lobster back stainless steel by AM Performance - $2200

AM Performance cat back exhaust system 2x2.5" in to 2x4" pipe with titanium tips - $900

VQ35 ecu with rb25 nisstune board (lets you use vct unlike RB20 ecu)- $450

Yellow Jackets coilpacks for s1 rb25 (all working, used for 1 year, fantastic coilpack, search forums) - $250

Power Enterprise 850cc side feed injectors to suit rb25 in rail, brand new - $750

ORC Single plate clutch, 409 series unsprung center, used for 6months still in good cond - $400

Greddy copy plenum kit (rb25 throttle body adapter, nipple fittings, hose fittings, hoses) brand new - $350

External fuel pump setup, 2L tank + bosch 044 with mount and all fittings + ethanol fuel hose, brand new - $350

Wlabro 550hp intank pump - $100

R33 Non-sunroof 9point cusco D1 cage, through dash with side intrusion bars and padding - $950

R33 brake setup, hubs, slotted discs, calipers, a1rm pads and adr approved braided line - $800

R33 BC BR Coilovers, used for 4000kms, like new - $900

R200 locked diff, tight as - $200

Kazama castor arms suit r33 and other models - $150

Rear camber arms unknown brand, brand new - $100

Hicas lock bar - $80

R32 genuine GTR intercooler - 150

Rb20/25 hybrid intercooler kit, core is rough but no leaks - $150

z32 afm with plug - $150

q45 afm - $80

Work VS-XX wheels, 18x10 +13 front with kumho ku36 tyres 60%, 18x12 -4 rears with bridgestone tyres 40%, not for groupies or wanna be's... need some serious guard work to fit these babies. Genuine 3 piece - $3000

And everything else that you could think of, suspension arms, lights, dash pieces, trims, looms etc etc... im sure I missed a lot of little aftermarket things but those are the major ones listed. If I go ahead with it I will list all the parts and pictures as its taken apart.

Also, clean registrable r33 shell/plates.

If youre interested in anything PM me, when I have enough interest the strip show starts.

Edited by SkyHi_33
Link to comment
Share on other sites
SkyHi_33 Mentor

SkyHi_33

Posted
  • Author
Posted

No std. steering wheel, ive got a momo drifting suede deep dish, and two no brand deep dish suede wheels, one black one blue.

Haha its a very nice exhaust, $1550 from memmory new and its barely been used!!!

Ps. Cant reply to pm's off the phone sorry guys, ill get to it asap!

Thanks :)

Link to comment
Share on other sites
SkyHi_33 Mentor

SkyHi_33

Posted
  • Author
Posted (edited)

I can get pics of most of the items, the plenum is brand new. Ill wait a few days till Ive got enough interest and if there is, then Ill post another for sale thread with all the pictures of parts.

Im located in Adelaide, SA. Marion area. The shell is in primer and needs a bit of body work but its straight.

Steering wheels, I dont want to sell the momo just yet but the other two I can do for $80ea + postage, theyre brand new in the box still.

they look like this (same wheel on a mates car)

http://s2.photobucket.com/albums/y33/kfsRule_2/?action=view&current=steeringwheel.jpg

Edited by SkyHi_33
Link to comment
Share on other sites
SkyHi_33 Mentor

SkyHi_33

Posted
  • Author
Posted

I havent got any pictures of most of the stuff atm, still deciding if I want to part it out. Have had a fair bit of interest so at this point I most likely will.

The rear arms are adjustable, and yes still got the engine loom.

As I said, Ill leave the thread up for a week or so, I've written down everyone's usernames for people interested in parts and will PM you in a few days when I figure out what to do with the car. In the meantime Ill try get a few pictures :)

Thanks!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Stivo
      R32 goes out in right curves

      By Stivo · Posted

      That's true. However, this problem has started since the tuning. First time with the return journey from the tuning. But yes, the pipe was clogged with dirt and rust. That was certainly due to age
    • Dose Pipe Sutututu
      CD009 RB Conversion

      By Dose Pipe Sutututu · Posted

      Great info @tidi0x  Will definitely be handy for others and maybe me if I decide to keep the shit box H pattern.
    • tidi0x
      CD009 RB Conversion

      By tidi0x · Posted

      Bumping this up one last time.... I wanted to follow up on the clutch slave issue. I realized that what the issue comes down to is the pocket is flat milled, and the cylinder does not want rest flat. So in order to mount it correctly you will need to make a spacer for the fingers so the cylinder is floating. I took two plates of aluminum, drilled some holes and was good. I did still need to make the relief cuts in the bell housing, as even with the spacer the bleed section still interferes. The OE bell housing the mounting holes are raised from the housing.       
    • robbo_rb180
      R32 Gtst - Track Car

      By robbo_rb180 · Posted

      If the event in USA goes ahead will be interesting as it seems the rules will get more cars over here. Apparently the track is laguna seca too. Yeah s15, if I get a the lower dash trims, centre console and change front cross member to standard LCA position will fit clubsprint. See how rules are as i would rather do complete widebody than a bolt on flare to run the 295 with proper clearance.
    • 180 wanabe
      370gt Stock Suspension

      By 180 wanabe · Posted

      If the car is legal height I can't see it being an issue. Found a thread on reddit that might offer some insight.   I got a ticket from a copper in QLD for my S15 being too low. They had this wheel thing on a stick that they put under the car and it hit my exhaust. Anyhow went to an exhaust shop to get the exhaust tucked up/hung a little higher and I wound the coilovers up a smidge. Don't think I even had to go back to the police station unlike when I got defected for having a carbon bonnet when I brought the S15 from the ACT to QLD and had to replace it and then rock up at a police station and have a yougish female officer who knew nothing about cars confirm that I had changed bonnets. Should have just painted the carbon bonnet yellow to match the rest of the car lol
×
×
  • Create New...