M80 And Central Locking?

[SVD198]

Hello everyone,

At the moment my car has a M80 Mongoose alarm with key less entry. Everything works fine however I would like for the drivers door to unlock/lock all the other doors when a key is used and still retain key less entry. The reason for this is simple, my cars factory alarm was set up this way and I wish to have the new alarm set up as similarly as possible ( please note the original alarm was gone when I purchased the car).

So far I have worked out that the orange/purple wire go constant 12v ( positive trigger), brown/white are earthed and green/blue go to the actuator. My question is how can I wire the central locking so that I can use the key barrel from the drivers door to unlock/lock and retain key less entry? And yes the drivers door does have a master actuator in place.

Please note I have tried contacting the installer, however they sold the business to someone else who would not assist me and then they shut down as well.

Edited March 18, 2012 by SVD198

[SVD198]

Never mind, found the mongoose central locking module in the alarm box, wired it using a negative trigger .

[Chris Rogers]

although you had worked it out. what car was this?

[SVD198]

It is a R31 Skyline and I am fairly certain you will know they did not come with central locking from factory besides the Ti models. However this is a SVD model which had alarm/central locking.