Jump to content
SAU Community

S A U N S W - Texi, "the Original" @ Sutton Road


Recommended Posts

  • Replies 219
  • Created
  • Last Reply

Top Posters In This Topic

Semi slicks, check.

Full tank if fuel, check.

Raised suspension to not foul tyres, check.

Boost controller, tomorrow.

Nearly all systems go for sutton.....

Woooooooooooo hooooooooo

Yes spaces left. Send the form and money today and you'll be fine.

There is no extra cost for the CAMS license other than the actual cost of the license (eg it costs you no more to do it on the day, but the license cost still has to be paid)

So it turns out i can't afford it at the moment, which sucks epic....

hopefully you guys get a good turn out and we'll be able to do another one in the not too distant future.

I might still come out to spectate a little bit though, maybe.

Scott, don't worry so much! You'll live longer :D

There is a slow lap at the start where everyone goes in single file at a slow pace so you will be familiar with the track.

By mega power, I'm talking 420rwkw and upwards. I'd expect you to be in 2nd or 3rd for the whole run (of course with the exception of 1st at 7500rpm for the launch at the start)

Also that crest is like any crest you see in hilly parts of Sydney, for example the big one in Greenwich. You're not encouraged to go flat out over it and by doing so your time will be slower anyway so stuff that. If it's really bothering you I'll take you to it in the morning before runs start and drive over it myself with you in the car to demonstrate it's perfectly harmless when common sense is used :)

What are you talking about Steveo?!?!

I'm worried that I (a) WON'T get air and (b) won't get in to fourth gear.

If I don't get into at least 3rd gear with my 310awkw I'm going to be devastated. And I will only be launching at 1250 rpm in first.

I'm very familiar with that crest in Greenwich in fact I know someone who got monster air off it, crashed and now has monster metal plates in him. Retard.

Car is still being tweaked as I type this so it can't get much more prepared than that (assuming I get it back in time). Bring it on!

So lets say I want to enter. I can fill out the form and fax is etc, but what about payment?? Even if I transfer it first thing tomorrow chances are it won't appear in your account by the end of the day. Cash on the day ok???

So lets say I want to enter. I can fill out the form and fax is etc, but what about payment?? Even if I transfer it first thing tomorrow chances are it won't appear in your account by the end of the day. Cash on the day ok???

Yes bring cash on the day... make sure it is the correct amount, we don't have oodles of change!

Brakes bled see u ladies there

What's with the early night bludger?

I've just knocked off, wrecker motor in the car, seems to be running OK. Thanks to Mark and the boys at Hills Motorsport for putting on some late nights to help get it ready.

See y'all on saturday

kept half asking Steve tonight if we ended up with the numbers to do another one of these things, sure hope so.

He would then burst out in laughter at some ribald joke someone or another had made and im pretty sure half of Canberra had to hear us giggling away as we drank the only pub for miles dry of all its finest lager.

Good times folks.

and i havent even turned a wheel in anger yet..

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yeah, the latter. No diff should have a centre replaced without checking clearances because its unlikely to be the same as whatever came out. Not that that stops most people just checking a new centre in
    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
×
×
  • Create New...