Jump to content
SAU Community

Recommended Posts

I still firmly believe that you can only enjoy an rb20 after you have owned/driven and built more powerful cars. The 'thrashyness' factor is hard to re-create with a 25, 26 or 30...

You just have to enjoy them for what they are and try not to turn them into somthing they can't really be. Stock or small turbo's.. under 240kw but dosn't drop off to hard in the top end. Collar, good oil pump and a decent tune.

Then just enjoy it for what it is!

Cheers

Justin

put a 25 in it, just did it with my 32, my rb20 broke.. but hey the 25 is sooo much better. and yes r33's are gross. id never buy one.

Oh, so the R33's are too ugly to own ? but there engines arnt ? lol

Oh, so the R33's are too ugly to own ? but there engines arnt ? lol

Correct

Why an oil pump Justin? , i always thought rb20 was just bolt ons and thrash? .

And this is something i would like to know also

Edited by dirty jew
  • 2 weeks later...

honestly, all i have done since learning that you can LEGALLY put a RB25det into an R32.... is search for a decent RB25DET!!!!

i never realised this can be done legally!!!

can an R32 GTR brake upgrade be enough for the regency approval in sa?

Edited by GH05T

Hey mike,

Ive got a 20 with a 25 turbo, fmic, pod, 3 inch exh etc

Before you get a boost controller, see what boost you are getting, you may get 10-11 psi.

A boost controller is a waste of cash for an extra 1-2 psi (25 turbo ceramic, 14psi max)

I spent $400 on a sweet boost controller before i got the new boost gauge. oops.

Lots of bits can be used on a 20 and 25 like if you get a good turbo, or fuel pump, you can swap over later.

Just think about what you can use on both motors, and all the other mods to your car, keep the 32.

can an R32 GTR brake upgrade be enough for the regency approval in sa?

All that is needed is the same size brakes as the donor engine's car. So R33 brakes to go with RB25. In my case I've put a Neo in, but not putting in R34 brakes. The 296x30 will be good enough to get it through Regency.

GTR brakes will also do, but you don't have to go that fat to be legal.

The main problem with worrying about a legal engine conversion and putting the car over the pits at Regency is all the other things that most people have on their cars that won't pass, like adjustable suspension arms, height adjustable coilovers, boost controllers, fibreglass bonnets, etc etc etc. All that has to come off to be inspected. At least for me I only had to leave off the boost controller and swap the castor arms back. I'm crossing my fingers that they will let the Momo wheel go through, as I don't have a ready alternative available.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...