Jump to content
SAU Community

Recommended Posts

Have finally bit the bullet after procrastinating for years over what to do with it. I will only be selling the car in large pieces so please don't email asking if I have this or that and I won't sepeate parts that are listed atm. Hoping to move everything fast so if your after multiple items I will work out a good price for you.

I spent money of this car trying to make it go quicker smarter instead of spending massive dollars for little gain. The car performed extremely well for what is was. I just needed more seat time and money for trackdays to get the most out of it.

Complete rolling shell $3500ono

It will be the whole car minus brakes and all parts required to run a RB26 and g/box (engine loom, afm's, airbox, intercooler+pipes, radiator, etc) The whole car loom will be there.

Complete shell will come with all panels, llights, complete interior in car + GTR floor mats in VGC plus spare set interior panels with scuffs, all driveshafts, aircon with gas still in it, flared rear guards to suit 34 offset 10inch wheels. Battery in boot. Std GTR suspension. Colour STI blue. Boot and bonnet will need painting as it had a carbon bonnet previously and big wing on he boot. Has compliance and previous rego in my name. Nothing dodgy here. Engine will be removed upon sale of shell. Consider compliance $2000, Rear subframe/diff $800, interior $800, Shell $2000 with front panels plus aircon and all 4wd electronics. Newish windscreen. Its a good little deal. Comes with Cirlar 18x9.5 pair rims.

Engine $4000

HKS oversized forged pistons to make it a 2.7 litre. Extremely smooth/quiet running engine. Has only ever been run at under 280rwkw because of being safe side of injector limited with standard injectors/afm's. It has made 300rwkw with -5's on dyno but didn't want to run it with inj's maxed so turned the boost down a few psi and retarded the ignition. It will come as a whole package with loom, ECU, afm's, all sensors, standard turbo's. Have never had a need to have the engine out of the car so unsure if its a R33 motor and what else has been done to it.

G/box $600

R32 GTR gearbox with tight transfer case. No noises and good syncro's. Comes with shifter. Push type

Diff $400

Thought it was an aftermarket diff and so did eveyone who drove the car but on removal it seems to be a tightly shimmed standard diff which I believe is a 1.5 way from factory. Locks inner wheel while turning.

Clutch $1,500

OS Giken triple plate clutch with hardly any wear on plates or basket. Their $3000 new. Nice clutch to drive with for the clamping force it provides. I have a fettish with this clutch. Didn't want to part with it.

Turbo $1,300

Garret -5 turbos with around 15000km's on them. Come with adjustable actuators

Dumps/front/exh $500

Custom 3 inch dump pipes with 3 inch front pipes into 3.5inch merger to 3inch cat flange. These provide massive amounts of flow.

Intercooler $300

100mm FMIC. Unknown brand but it flows well and never had any knock so it must cool well. Solid end tanks. Tube/fin.

Shocks+susp package $2000

Bilstein shocks form a production car that upgraded to DMS. Valved by Syndeykid back in the day and adj height. By far the best money I ever spent on my car. Car is so settled no matter what I ever do with it. The car has run a 1.23 at Sandown with these on normal road tyres (not semi's or high $ tyres) and $15 rear brake pads and cheap rotors all round with 280rwkw. I did go quicker but WRX club pulled the timing gear on the last sessions. Wish I knew what it did. Was def in the 22's.

Also comes with Cusco upper arms, strut braces, Tein castor rods and whiteline swaybars with extra adj holes.

This will make you go faster for cheaper than any amount of money you spend on your engine. Go quick smarter with less high breakages caused by high power.

P1 QF's $2000

18x10 +18 or +12 offset. Need to check. These are the second lightest forged wheel you can buy without magnesium being added as extremely rare now. Less unsprung weight and with no impurities their strong. Over $900 each to buy new if you can find them. Massive cooling due to the thin spoke design. Still have original paint but its fairly chipped up. Would require painting or powder coating. These would normally sell for $2500 so I have factored in the price of you getting them restored to the colour of your choice. Come with Hankook Evo 265 tyres. 2 good, 2 bald. Suit R32, R33, R34 GTR of flare your GTST like Russman.

PFC and HC $750

Comes with hand controller. Serial Number PFC GTR33 020-1387. Has tune to suit -5 turbo's from RE Customs with std inj an afm's

Defi $250

Defi boost gauge with controller/logger

Boost control $250

HKS EVC 4 boost controller. Manages boost very well. No spiking

4wd controller $100

4wd controller I built from a Jaycar 0-5V kit. Setup perfectly for light push on turn in to 4 wheel powerslide on exit corner. Well balanced

Single clutch $250

Exedy 4 puck button clutch with very little wear. Comes with standard flywheel. Bolt it straight into your car

Slicks $250

4 x Pirelli P Zero slicks with a lot of life still left in them. A car recently used them to try and break a Nurburgring record. 265 width to suit 18inch rim.

Wing $650

Ex VT K-Mart racing V8 supercar wing. Carbon fibre with gelcoat finish. Harrop Machined struts. It dinted the back of my boot in at PI due to downforce. Over $3k new with struts. Wing only weights a couple kg's.

Nismo instrument cluster $250

320kmh instrument in R32 GTR cluster. Pretty sure speedo could be removed and placed into a R32 GTST cluster easily.

Harness $150

Race harness I only used a couple of times purchased from Meridian. Always boxed when not in use. Need to check brand.

Data Consult $100

Data Consult to suit R32. Haven't plugged it in in years. Not sure if it had the 2 afm/02 readouts. Pretty sure it did. Handy diagnostic tool.

F&RbBrakes + braided line$800

324mm upgraded brakes with slotted new RDA rotor and UAS caliper spacer. RDA don't crack like DBA. Braided lines all round with solid metal crimped fittings. Few sets used brand name front pads.

Reco'd calipers with new seal kits and paint. These only did one track day and a few km's on the street before it was parked.

Chip burners for two $100

Burnt a few chip to remove limiters and copy others. Will burn 28? pin eproms. Also has eraser. Its a Jaycar kit type. Have 2 of these.

Turbo timer $25

Need to check brand.

Skirts - Trust Gracer $300

These are genuine Trust Gracer side skirts to suit R32 GTR. They in my opinion are the best/toughest looking skirt to suit a 32 with wide wheels. Better quality than anything I have seen in Australia. Have a search on Google images.

Rear pods $100

Fibreglass rear pods to suit R32 GTR. Straight out of mould.

Grill $100

R32 GTR grill in black

Guard liners /tray set $150

Set in good condition. One of the brake dusts has been worn a little on fwd edge. Will not seperate ducts.

R32 GTR/GTST Towbar $125

To suit all R32's. Tounge removes so it cannot be seen. I made it myself It has towed a 17ft boat at 100kmh without a problem. Prob wouldn't recommend it though. Good to used with a 6x4 to move bikes or furniture. Saves needing a second car.

I'm at the south end of Melbourne but get around a little so might be able to meet some of you closer if I'm out and about.

If you would like pictures could you please PM me with your email address. Could you please not ask these questions "Would you sell the oil squirters seperately". Use your common sense people

Edited by Rowdyr32
  • Replies 95
  • Created
  • Last Reply

Top Posters In This Topic

The diff has been spoke for sorry Luke. I'll send you a photo of the towbar before pricing postage.

drftps13d the shell ran out of rego 2 years ago. Couldn't justify paying for a car I never drove.

Think you might have pushed the friend button. Not the pm.

The arms and castor rods came on the car when I bought it. I bought the shocks second hand off a race car maintained by Sydneykid. Not many kms obviously. Bought the swaybars new of him new at the sametime.

In the whole time I owned the car I have only put 13000Km on it and that involved two trips to Sydney. The shocks went about 2 years after buying the car. I might have the reciept somewhere but highly doubt it.

Sorry typed his with my phone!

Edited by Rowdyr32

I'm interested in the roller. Do you know of any major accident damage ? Are the chassis rails all crumpled or still in good nick?

Does it drive straight, have you ever had alignment issues ?

Can you send me some photos of the car in/out/under if possible.

Would also be interested in the wheels, skirts, rear pods, guard liners

if you want to package up a deal for me.

I tried to PM but you can't receive any new messages......

regards,

John

can't pm you either can you send me a picture of the tow setup ill most likely take it if its still for sale. mms me 0430078630

Spewin you're selling it mate. Not surprised now that it's been sitting there for such a long time.

Slicks $250

4 x Pirelli P Zero slicks with a lot of life still left in them. A car recently used them to try and break a Nurburgring record. 265 width to suit 18inch rim.

Wing $650

Ex VT K-Mart racing V8 supercar wing. Carbon fibre with gelcoat finish. Harrop Machined struts. It dinted the back of my boot in at PI due to downforce. Over $3k new with struts. Wing only weights a couple kg's.

Harness $150

Race harness I only used a couple of times purchased from Meridian. Always boxed when not in use. Need to check brand.

Might be interested in the slicks and the harness. Can you send pics to [email protected]

The wing!!!! Wish you were selling this last year! Would have bought it for sure!

Come with Hankook Evo 265 tyres. 2 good, 2 bald. Suit R32, R33, R34 GTR of flare your GTST like Russman.

haha. Hankook evo tyres are awesome too!

Just cleared out my pm box. I'm having internet issues at the moment and unable to send pictures through my phone. Tommorow I'll get on a fixed line and send all photos and answer questions as promised.

Just uploaded a huge amount of photos onto Photobucket. They are all out of order so have a flick through the pages. Note none of the parts have been cleaned. Removed straight from the car.

http://s1139.photobucket.com/albums/n544/rowdyr32/R32%20%20GTR%20Shell%20and%20Parts%20on%20SAU/

Curmi the towbar is SOLD awaiting payment.

PWND there is a photo showing the wing on the car in the link.

If I haven't responded to your pm's left me know. Just replied to about 30 or more.

Edited by Rowdyr32
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah, all the crude is used for fuels and petrochem feedstocks (pesticides, many other chemicals, etc etc). But increasingly over the last few decades, much of the petrochem synthessis has started with methane because NG has been cheaper than oil, cleaner and easier and more consistent to work with, etc etc etc. So it's really had to say what the fraction either way is. Suffice to say - the direct fuels fraction is not insigificant. Heavy transport uses excruciatingly large amounts. Diesel is wasted in jet heaters in North American garages and workshops, thrown down drill holes in quarries, pissed all over the wall to provide electricity to certain outback communities, etc etc. Obviously road transport, and our pet project, recreational consumption camouflaged as road transport, is a smaller fraction of the total liquid HC consumption again. If you're talking aboust Aussie cars' contribution to the absolute total CO2 production of the country, then of course our share of the cubic mile of coal that is used for power generation, metallurgy, etc adds up to a big chunk. Then there is the consumption of timber. Did you know that the production of silicon metal, for example, is done in Australia by using hardwood? And f**king lots and lots and lots of hardwood at that. Until recently, it was f**king jarrah! There are many such sneaky contributors to CO2 production in industry and farming. NG is used in massive quantities in Australia, for power gen, for running huge water pumps (like, 1-2MW sized caterpillar V16 engines running flat out pumping water) for places like mine sites and minerals/metals refineries. And there are just a huge number of those sort of things going on quietly in the background. So NG use is a big fraction of total CO2 production here. I mean, shit, I personally design burners that are used in furnaces here in Oz that use multiple MW of gas all day every day. The largest such that I've done (not here in Oz) was rated to 150MW. One. Single. Gas burner. In a cement clinker kiln. There are thousands of such things out there in the world. There are double digits of them just here in Oz. (OK< just barely double digits now that a lot of them have shut - and they are all <100MW). But it's all the same to me. People in the car world (like this forum's users) would like to think that you only have to create an industrial capability to replace the fuel that they will be using in 10 years time, and imagine that everyone else will be driving EVs. And while the latter part of that is largely true, the liquid HC fuel industry as a whole is so much more massive than the bit used for cars, that there will be no commercial pressure to produce "renewable" "synthetic" fuels just for cars, when 100x that much would still be being burnt straight from the well. You have to replace it all, or you're not doing what is required. And then you get back to my massive numbers. People don't handle massive numbers at all well. Once you get past about 7 or 8 zeros, it becomes meaningless for most people.
    • @GTSBoy out of the cubic mile of crude oil we burn each year, I wonder how much of that is actually used for providing petrol and diesel.   From memory the figure for cars in Australia, is that they only add up to about 2 to 3% of our CO2 production. Which means something else here is burning a shit tonne of stuff to make CO2, and we're not really straight up burning oil everywhere, so our CO2 production is coming from elsewhere too.   Also we should totally just run thermal energy from deep in the ground. That way we can start to cool the inside of the planet and reverse global warming (PS, this last paragraph is a total piss take)
    • As somebody who works in the energy sector and lives in a subzero climate, i'm convinced EV's will never be the bulk of our transport.  EV battery and vehicle companies over here have been going bankrupt on a weekly basis the last year. 
    • With all the rust on those R32s, how can it even support all the extra weight requirements. Probably end up handling as well as a 1990s Ford Falcon Taxi.
    • Yes...but look at the numbers. There is a tiny tiny fraction of the number of Joules available, compared to what is used/needed. Just because things are "possible" doesn't make them meaningful.
×
×
  • Create New...