Jump to content
SAU Community

17X9 Rims - Tell Me What These Are Please !

sultanaz
 Share

Recommended Posts

sultanaz Proficient

sultanaz

Posted
Posted (edited)

Hey fellas,

I bought a R32 GTR about a year ago and the wheels that were on the vehicle had no indication to me what offset they were , or brand.. They look similar to a starcorp but have a curvy arch instead.

they are running 245/45/17 Rubber - 5 x 114.3.

The Rubber itself is completely illegal they are bald as ever, 2 of the rims have pretty bad gutter bash and 2 of them only show minor gutter bash. I drove around this car for abit and all 4 wheels and NONE of the wheels are buckled !

Please take a look at these photos and maybe you can make out what rims these are and how much id be able to get for them because i want them gone . I'm aware id sell them cheap due to the condition i dont expect to much, On the other hand though i did take 30 mins and gave a hit to one of the wheels and it come up well , all the marks on the dish come off very easily with a light scrub of wet and dry and if you had to refurbish these wheels i reckon they would look pretty good!.

wheel.jpg

FirstRim-2Large.jpg

FirstRim-3Large.jpg

FirstRim-6Large.jpg

MeassurementLarge.jpg

IMG_1874Large.jpg

DSC_0131LargeLarge.jpg

Edited by sultanaz
sultanaz Proficient

sultanaz

Posted
  • Author
Posted

Not sure how much they weigh but they wernt that heavy thats forsure. but im not fussed nemore haha i sold them today to a mate for drifting and draging :)

his happy and im happy, thanks for the input !!

badhairdave Proficient

badhairdave

Posted
Posted

They are Stern's.

Don't know what model, either they don't put stickers on them or they fall off easily.

I have a set on my silvia in 17x9 +25ish (based on tape measure as no stickers)

Yours look to have been painted recently, they are generally silver painted centres.

sultanaz Proficient

sultanaz

Posted
  • Author
Posted

They are Stern's.

Don't know what model, either they don't put stickers on them or they fall off easily.

I have a set on my silvia in 17x9 +25ish (based on tape measure as no stickers)

Yours look to have been painted recently, they are generally silver painted centres.

Thanks heaps man ! haha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Wazmond
      Stock rb25det neo questions

      By Wazmond · Posted

      Hows your intake piping? Are you still running stock? Having in the stock AFM position would mean, if the BOV was shut/venting out, it'd create the almost stalling kind of effect right // "the rich pulse behaviour" due to MAF thinking air is flowing ? But this would be better than having the bov in the stock position + MAF on/just before cross over piping right?
    • GTSBoy
      Stock rb25det neo questions

      By GTSBoy · Posted

      Essentially, yes. Although I wouldn't put the AFM on the crossover pipe. I'd want to put it into what amounts to the correct size tube, which is more easily done in the intercooler pipework. I bought a mount tube for card stile AFM that replaces the stock AFM - although being a cheap AliExpress knockoff, it had not flange and I had to make and weld my own. But it is the same length and diameter as the stock RB AFM, goes on my airbox, etc etc. I don't have a sick enough rig to warrant anything different, and the swap will take 5 minutes (when I finally get around to it and the injectors & the dyno tune).
    • Wazmond
      Stock rb25det neo questions

      By Wazmond · Posted

      So to summarise, the best thing to do is to move recirc to between turbo and IC, and maf on the crossover pipe. Meaning I'd need a recirc flange, drill a hole in the piping on turbo outlet area. And drill hole on crossover to fit/weld maf sensor? Either that or put the MAF on the turbo inlet right?  Is an aftermarket recirc/blowoff valve recommended? Do currently have family in Japan so could probably bring something back with maybe a cheeky lil SuperAutobacs run?
    • tsuokun
      Lets play a game - What is causing my oil consumption?

      By tsuokun · Posted

      Yep, so far most have said that it looks like corrosion on the wall from piston not moving. Which then has probably damaged the oil rings and caused those vertical marks. The longest the engine was still after the rebuild, was the winter of 2018 - 2019, plus the boat trip to Japan. When I shipped the car, it had normal gas in the tank but before that winter pause, it had E85 in tank.  In any case, even if either one of those was the cause, it happened close to 6 years ago and the car has been driven something like 30 000kms after the fact. Again, apart from the plugs and the dip stick, there is nothing in the way the car runs that would indicate what has been going on in the engine. I am going to consult a shop and ask their opinion, what would be the best approach. I do have some access to a garage I could use to diagnose further myself, but time is very restrictive. Might end up buying another engine that could be used while this one is being remedied. Without pulling the head, it will be impossible to find out if it needs another bore, but here's to hoping a hone would suffice.  Goddamnit, I would really have preferred this not happening.  
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      Boot is going to be replaced eventually. I just wire brushed what I could and rust converted. Then painted in rust kill primer. the spoiler also got repainted and plugs replaced on the ends. The under side of the bonnet is going to be black also, currently white. But red on the top side, same colour code as the silo to begin.
×
×
  • Create New...