Jump to content
SAU Community

Recommended Posts

HI guys I have a set of red rb25 side feed nismo 555cc injectors for sale no longer needed as I'm using 870cc ones

$350ono+shipping or pick up if your on the gold coast

I bought these off ebay as a new item but they are definately used

Im 99% sure these are reconditioned

Link to comment
https://www.sau.com.au/forums/topic/395514-nismo-555cc-injectors/
Share on other sites

Just so you know...

The Nismo 555cc Side feeds are yellow tops...

You might have been gypped with RB25 NA ones which are also red and flow alot less than std Purple tops at 370cc...

Could be lucky amd have recieved 740cc nismos which are red, unless you really know your stuff you cant know jist by looking at them etc...

Eg... Sard/Denso 550cc are red (but slightly different red to nismo 740cc)

Maybe include part number & pics...

You can usually tell by the the body/markings/tip/spray pattern...

If you bought of a guy on Ebay that sells them for around $500 delivered, they are like you honestly stated, reconditioned flowed ones...which to be fair, still is 550cc flowed, but is not brand new and is not a Nismo genuine product. Very good performance otherwise and you're asking price is fair.

Good luck with the sale mate.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey @Butters, did you end up getting this clutch in ? I have just ordered to a uniclutch track to go in my getrag 6 speed that’s in my BNR 32     
    • I know you don't want to hear this comment, but I can't not say it.  I just can't see 200kw being worth the time and effort. Its like guys with NA cars, putting in headers/exhaust/tune for a massive 20% jump in power. Great, the slow car is still slow and you're down $10,000.  My vote is leave it NA or price in a gearbox upgrade and shoot for at least 300KW, preferably 350KW+.  Now you have a NC that will try to kill you from time to time and will be exciting to drive
    • Ah yep. The main message I want to pass on is, try not to get scared of ghosts when thinking about knock/knock detection.  What I mean is, healthy engines make noise. Knock is also noise. Your knock sensor and ECU combo are trying to determine bad noise from good noise based on how loud the noise is. The factory knock sensors and ECU are not good at doing this.  Modern ECU's are pretty decent at it, however I'd still say that you would want to verify that if your ECU says it's knock, that you actually listen to it and confirm that it is correct.  Are you familiar with the plex knock monitor?  https://www.plex-tuning.com/products/plex-knock-monitor-v3/ I expect you're the type of person that would be very keen to play with something like this. It is great knock detection and you can pop some headphones on and listen to what's going on.  Knock that you've deliberately induced in low load low RPM areas is not really putting anything at risk and is a great tuning/learning/verification tool.  I just thought this was worth mentioning based on the way you were talking about setting up a base map and the Haltech base map settings. There are better ways to spend your time then chasing ghosts and worrying about detonation in scenarios that it is crazy unlikely to encounter it.  I was also wondering, what ECU are you planning to get? Will it be long til you pick it up?
    • This came quicker than I thought. It ain't even 2025 yet.
    • I somehow quoted my post instead of editing it. I regret nothing.
×
×
  • Create New...