Jump to content
SAU Community

Deca Accommodation - May 4 & 5


Bec
 Share

Recommended Posts

Guess what time it is - that's right DECA TIME!!!

It's on again and I have booked us the hotel in Shepp for the upcoming DECA.

When: Fri 4 & Sat 5 May

Where: Tirana Motor Inn

Address: 33 -37 Wyndham St, Shepparton

Cost: $50 per person per night (if sharing)

$85 per night to have a single person in a room by themselves

If you would like a room, please let me know as soon as possible, they will want to release to the public whatever rooms we are not using in a few weeks.

I need to know:

* nights staying

* how many people

* what bed configurations you need (ie twin, double etc)

If you are coming by yourself, that's fine, just let me know and I will team you up with somebody else to share a room with.

Let me know here, by email, by PM or by phone.

The sooner you tell me, the easier you make it for me.

*** NOTE - if the hotel books out, preference will be given to those staying both nights

- if you ask for a room and don't turn up without letting me know, you get added to my black list (you ppl are starting to ruin it for everyone)

Entries coming soon!!!

Link to comment
Share on other sites

  • Replies 73
  • Created
  • Last Reply

Top Posters In This Topic

Fri/Sat

Bec (& Sunday)

Ryan

Leon (& Sunday)

Russ (Fri only)/Campbell/Bobby/Dean/Tim (Sat only)/Mark/Ben(family rooms)

Wayne-O

Paul & Steve-O & Nick

NSW Dave (aggroman)

Chris + GF

Juliette (& Sunday)

Shane & Megan

Paul & Kat

Jett, Joe & Max

Kieran & Robbie Williams

Matt Butters + GF

Laith

Sean P + GF AND Rob, Joey, Trav + 1 more

Brisby

Fri only

Jake

Sat only

Jason

Brent & Steph

Link to comment
Share on other sites

It also might be time for ABC's, beer bongs and Spirytus to make an appearance :)

well i heard it was *cough* LEON'S BIRTHDAY *cough* :whistling:

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share




  • Similar Content

  • Latest Posts

    • There is a LOT of stuff that can be done, it all depends on how much time and money you want to spend on doing in.  Not all ECUs will be able to do it, and the more control you need the more time and knowledge needs to be put into making it work.  If you're willing to spend the time and money and have the right hardware and skills involved there's a lot that can be done. 
    • I am impressed with all this level of adjustment. I didn't expect all this possibility
    • Correct.  In the case of the 500kw dyno plot I showed you the car actually runs two boost control solenoids for boost control and a 5psi wastegate spring.  It allows me to control how much boost pressure is applied to both sides of the wastegate valve at any point and fairly accurately control boost target as a result. I've tuned it so that it's able to target anywhere from 5psi to 25psi depending on what's needed.  The target tables I've set up in that car are Gear vs RPM, so every gear has potential for a different boost (and torque) curve.   First and second gear have quite low boost targets, third gear actually has different target boost all the way through the rpm range as it's a stock RB25 gearbox - the boost targets have been chosen to maintain a peak of 600nm (what the owner has set as the maximum torque he's happy with putting through the stock 3rd gear) but it carries that to the rev limiter.   The boost curve to achieve that is something of a ramp up, then hold, then ramp up again and the power curve looks more like a flat line haha.  
    • so you can decrease or increase the boost depending on the diet as you wish?     by acting on the wastegate?
    • That's torque and power, it's all from a single run.  The boost curve is "held back" from it's peak target in the 3500rpm to 5000rpm range from memory, so it ramps hard to something like 18psi then climbs more progressively to 23psi nearer 5000rpm.   It makes the torque (and power) ramp more "natural" and less hard on parts and traction, it doesn't feel artificially held back.   
×
×
  • Create New...