Jump to content
SAU Community

Recommended Posts

Got a few goodies for sale :thumbsup:

1) Apexi Power FC PRO with Hand Controller for R32 and R33 GTR WILL not Separate

The hand controller is only 2 years old and was brand new in box when I bought it.

Thanks to Paulr33 here is some info on the PFC Pro

What is the "Power FC Pro"

The Power FC Pro Spec.CPU has been designed for drag racing use. These units have two additional functions over the regular units: 1. Ignition cut used for rpm limiter - Regular Power FCs cut fuel feed when the preset revolution limit is reached. At high rpm, there is the possibility of knocking when the fuel is cut in high-powered cars. The Power FC Pro CPUs cut ignition at the rpm limit to prevent the knocking that could potentially destroy the engine. 2. 0km/h rpm limiter setting - Allows for the setting for an initial rpm limiter that is active whilst the car is not in motion. This allows for mainting a rpm level for consistent launches.

This is definately a FC Pro unit and is in good working condition. It starts up with the Power FC PRo logo and has the ignition cut etc. It has the Launch control. You can set it to your desired revs and when the car is stationary, u can plant the throttle and it stays to your desired revs. IT makes the rally style snap crackle and pop haha and if you are on the track and have a decat it blows nice flames :)

PRICE : $870 ONO

2) Stainless Decat pipe for 32 33 GTST and GTR's plus Stageas

In good working condition no corrosion etc

PRICE : $40 ONO

3) M's Twin GTR Air Pod Filters with adapters for 32 and 33 Std Afm

Good condition, the filters I believe are made by K&N . They have been cleaned and re oiled with the K&N Filter recharger kit

They have no holes and serve their purpose ie air filtration.

The adapters have been repainted black

PRICE: $100 ONO

ITEMS are pickup in Newcastle NSW 1.5 hrs from Sydney or can post at buyers expense :) Can also possibly deliver to Sydney

Nick

Edited by DLOOOK

Got a few goodies for sale :thumbsup:

1) Apexi Power FC PRO with Hand Controller for R32 and R33 GTR WILL not Separate

The hand controller is only 2 years old and was brand new in box when I bought it.

Thanks to Paulr33 here is some info on the PFC Pro

What is the "Power FC Pro"

The Power FC Pro Spec.CPU has been designed for drag racing use. These units have two additional functions over the regular units: 1. Ignition cut used for rpm limiter - Regular Power FCs cut fuel feed when the preset revolution limit is reached. At high rpm, there is the possibility of knocking when the fuel is cut in high-powered cars. The Power FC Pro CPUs cut ignition at the rpm limit to prevent the knocking that could potentially destroy the engine. 2. 0km/h rpm limiter setting - Allows for the setting for an initial rpm limiter that is active whilst the car is not in motion. This allows for mainting a rpm level for consistent launches.

This is definately a FC Pro unit and is in good working condition. It starts up with the Power FC PRo logo and has the ignition cut etc. It has the Launch control. You can set it to your desired revs and when the car is stationary, u can plant the throttle and it stays to your desired revs. IT makes the rally style snap crackle and pop haha and if you are on the track and have a decat it blows nice flames :)

PRICE : $870 ONO

2) Stainless Decat pipe for 32 33 GTST and GTR's plus Stageas

In good working condition no corrosion etc

PRICE : $40 ONO

3) M's Twin GTR Air Pod Filters with adapters for 32 and 33 Std Afm

Good condition, the filters I believe are made by K&N . They have been cleaned and re oiled with the K&N Filter recharger kit

They have no holes and serve their purpose ie air filtration.

The adapters have been repainted black

PRICE: $100 ONO

ITEMS are pickup in Newcastle NSW 1.5 hrs from Sydney or can post at buyers expense :) Can also possibly deliver to Sydney

Nick

PICS now up

Will also post pics of PFC PRO

post-36665-0-41575000-1332833531_thumb.jpg

post-36665-0-35163900-1332833507_thumb.jpg

Have also added the following

-R33 GTR Genuine Carpet Mats Good Condition

$150 ONO

post-36665-0-65007000-1332833550_thumb.jpg

-Genuine "CarBra' for R33 GTST and GTR fits both Series I and Series II

$200 ONO

post-36665-0-62530900-1332833562_thumb.jpg

Hey guys,

-PFC pro now sold

-M's Pods sold pending funds clearing

All other parts still available and negotiable

Also have the following parts

-R33 2dr Stock Catback no rust, good condition (can deliver to Sydney for cost of fuel)

$240

-SAFC I Apexi non digital version has 5 dials for adjustments at different rev ranges

$65

-Compliance Cat good condition. Suits Stagea, Skyline r33 and been told it suits r32 and r34.

$60 good to clear defects Has ID numbers so EPA will heart u !!

N/CE 91006,1109, 91006 212007

-Cusco FRONT Coilovers good condition, no knocks and not too harsh a ride. Similar ride to my Sydneykid Bilsteins

$200

-VSPEC GTR front and rear struts springs good condition no knocks. ~65000km

$200

Cheers Nick

pickup Newcastle or post at buyers expense. As a guide a pair of coilover was about $20 shipped to QLD

Hey mate .

The pic is in the post dated 27/3/12.

Made from Stainless Steel.Will also polish up for you

:)

Features a 7.6CM (3") Inlet and outlet.

<LI>

Features an o2 Sensor hole can be used or left plugged

Bolt on fitment to r32, r33 , stags.

Im in Sydney this weekend for people that might want me to deliver parts..

PODS and DECATS now GOOOOnnnnee.

PS anyone tell me if i can edit the thread title

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...