Jump to content
SAU Community

RB30DET turbo choices

drunkenmaster
 Share

Recommended Posts

drunkenmaster Community Regular

drunkenmaster

Posted
Posted

After a long a tiring read through that never ended RB30 thread up top, I thought I'd ask my questions directly as I have heard there are a few knowledgable people on this board when it comes to RB's and turbos.

I have an RB30DET freshly rebuilt using standard internals and 8.3:1 compression.

I hope to acheive 250rwkw at 15psi or below as well as have a streetable responsive car i.e. not too much of a laggy feel.

Am i asking too much?

At the moment I am choosing a turbo and the GT30 with the 0.82 exhaust A/R seems to be the go.

The motor is not going in a skyline though, rather a 1000kg or less 260Z so there are some concerns that the 0.82 will come on boost too violently for the light chassis. This has lead a few people to suggest the 1.06 exhaust AR.

Having spent more than a lot of new cars these days on this project and not really being close to finished, I am trying to kerb my spending and am playing with the idea of running an internal gate and using the standard exhaust manifold. With this in mind I have seen a mock up of the XR6 turbo for sale.

This is a GT3540 running and enlarged internal wastegate in a 1.06 AR exhaust housing. Will this be too big for my application and will the internal gate really hamper things too much?

Thanks guys

Link to comment
https://www.sau.com.au/forums/topic/39608-rb30det-turbo-choices/
Share on other sites
  • Replies 96
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

JNR24 Proficient

JNR24

Posted
Posted

.82 is too small small for a VL, yet for a 260z! :rant:

last 2 VLs i have put GT35/40s on with .82, ended up changing to a 1.06 with 1 month of road driving.

.82 are fun, but boost comes on too hard to quick. (again this comes down to the application of the car, .82 would be good for circuit work.)

JNR24 Proficient

JNR24

Posted
Posted

Steve,

The GT35R, R = Rebuildable/Repairable??

Theres no diffrence between a GT35 or a GT35R it terms of size. (both have same size compressor & Exhaust housing,/ can have same size housings fitted .63, .82, 1.06.)

Heres the confusing part:

The GT35R's flow 50lbs/ as per GCGs website (www.gcg.com.au) and are rated @ 700HP

BUT the GT35's flow 60lbs/ as per HPIAB (www.http://www.horsepowerinabox.com/HPIAB2/prod34.htm) and are rated @ 600HP

Whats the 100HP & $655.50 diffrence between these turbos? trim sizes? core?

(sorry about the hijack)

Cheers,

Trev

Guest INASNT

Guest INASNT

Posted
Posted
Nice information

Any opinions on internal gates?

calaisturbo.com has a few threads similar to this with only one epxerienced opinion also leaning toward 1.06 ex AR.

What about GT30 vs GT3540 arguments?

Dude y have u gone with an internal wastegate with your setup???

A nice turbo like that needs a nice 45mm external gate to get the full potential out of it.

Skyrine-Dave Mentor

Skyrine-Dave

Posted
Posted

Hye Trev,

The 'R' just means ball bearing in garretts definition... The lack of an 'R' is more than likely just lazyness rather than anything significant.

Dont go by GCG's site. Check out ray halls site he a more comprehensive specs page.

also the 700hp rating is for the top spec GT35R.. ie the 1.06 exh housing

JNR24 Proficient

JNR24

Posted
Posted

hi dave!

got a suprise for you coming soon... :P (Check screenie below)

I thought "GT" was Garrets definition of a Ball Bearing unit. e.g

GT35R = Ball bearing Garret, Repairable

T04R= Bush Bearing, Repairable

Someone has to know, i checked Rays site but i couldnt find GT specs...

Cheers,

Trev

JNR24 Proficient

JNR24

Posted
Posted
hi dave!

got a suprise for you coming soon...  :P    (Check screenie below)

I thought "GT" was Garrets definition of a Ball Bearing unit. e.g

GT35R = Ball bearing Garret, Repairable

T04R=  Bush Bearing, Repairable

Someone has to know, i checked Rays site but i couldnt find GT specs...

Cheers,

Trev

Woops forgot to attach screenie:

Skyrine-Dave Mentor

Skyrine-Dave

Posted
Posted

Ok copy from Ray Halls site:

Order is:

Model: Part#: CHRA#: AR: Trim: Model: diam: HP: lbs flow: AR: Trim: diam 

GT35 714568-0001 706451-0005 0.70 56 GT40 2.41/3.22 700 60 1.06 84 2.45/2.68 

GT35 714568-0002 706451-0005 0.70 56 GT40 2.41/3.22 620 60 0.83 84 2.45/2.68 

GT35 714568-0003 706451-0005 0.70 56 GT40 2.41/3.22 550 60 0.63 84 2.45/2.68

Pretty decent listing there

drunkenmaster Community Regular

drunkenmaster

Posted
  • Author
Posted

GT35 = GT35

GT35R = GT3540 as far as i know.

There is a lot of bad feeling towards going internally gated, what is the reason?

Another question and probably the most important is when these larger GT's make full boost and how suddenly?

Skyrine-Dave Mentor

Skyrine-Dave

Posted
Posted

please just open the garrett catalogue and look at the damn definitions :P

The "R" Denotes the 'rolling' element found in garrett single cartridge, dual ball bearing hi performance turbos.

GT35/40 is another naming convention made up by suppliers which has been discussed in the R33 RB30 conversion thread... Why bother arguing, just look up the catalogue and match it to what you are buying.

Internal gate is 'bad' as it wont be as effective at controlling boost as an external larger diameter wastegate would be... Sure you could do it if you really wanted to, but you would benefit from using these turbos the way they are meant to be run.. with custom manifolds and external wastegates

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      NC MX5

      By MBS206 · Posted

      There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
    • GTSBoy
      AC not coming from top vents

      By GTSBoy · Posted

      What HVAC actuator is under the steering wheel? Do you mean on the RHS of the centre console, immediately to the left of your shin? If so, then yes, it is probably that one, because that is the mode door actuator, and from what I know, it's still a pain in the arse to replace. I don't know about whole dash out, but you certainly have to rip into the centre console section. I don't know if it's covered in the workshop manual, as I haven't spent much time looking at those parts of it. (and by "the workshop manual, I mean the R32 GTR one, which is the most comprehensive one we have, and it should be similar enough between that and later cars to serve as a guide).
    • dbm7
      Shifting questions

      By dbm7 · Posted

      ...oops. forgot the TCU end...
    • Sleepergm
      Custom titanium intake

      By Sleepergm · Posted

      No I got mine from a friend that had fabricated one … but I had to fit it to my setup which was a hks turbo setup. His was a Garrett -7. So one of my turbos was not a flange for one side … then I had a leak in the welds I had to find a weld shut … in the end the setup was decent priced but I spent a lot to get it fitted. A couple companies I checked would make it but you’re talking 7-9k aud with titanium. No joke mine was 6-7k even second hand after I had to fit it in Hong Kong … labour is expensive here. 
    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      I'd just like to restate that I don't think anyone here is actually hating I recently sold a car part to a guy who was building a forged auto R34, with MV stall and aiming at ~450kw. I told him that I'm him, from the future and to stop after it explodes once. I told him I knew he won't listen the first time, and that's fine. But if my predictions do come true - Change direction faster than I did. I also said it's probably no coincidence that the dyno plot of a reliable turbo engine starts to look a lot like a N/A motor. :p
×
×
  • Create New...