Jump to content
SAU Community

Recommended Posts

I got the Aem progressive kit which has a fail safe and increases with boost depending how the controller is setup. Also got an inline water filter and was about 330 delivered from summit racing

Edit- looks like prices have gone up a bit :(

Edited by t_revz
  • 2 weeks later...

A mate rang me up and said he flipped and destroyed his sprintcar so I can have as much methanol as I want.

Maybe this will be enough to motivate me to get my exhaust done (which I now have all the parts for) and get retuned with water/meth :)

A mate rang me up and said he flipped and destroyed his sprintcar so I can have as much methanol as I want.

Maybe this will be enough to motivate me to get my exhaust done (which I now have all the parts for) and get retuned with water/meth :)

Bugger that, run it on straight methanol! :yes:

Seriously considering this as an option, we were looking at an e85 conversion but it was going into the $1000s by the time you uprate injectors, pumps, flex tune etc..

Is there a tuner in sydney with experience in this?

fitted a AEM 40 micron filter to my setup tonight..and shifted it all, its now pre-turbo, so will be interesting to see what it does

efficiency wise.

Doing another with a mate to his 3076 56T .64 ex gate on stocky mani in next week or so aswell, to tap out the turbo to its max, its already on

E85, just want to see how much more flow it can give turbo, we be interesting to see..

cheers

darren

Edited by jet_r31
  • 3 weeks later...

Well, I bought it, but after a rethink the money will lbe better spent on an EBC.

So it's for sale , check the FS section.

  • 2 months later...

just dynoed my car on 98 and then on water/meth injection

600cc CM7 coolingmist jet, added 10 degrees of timing across whole map, same as E85, it would have took more, but that was enough for me

20 degrees on 17psi to 30degrees

cheers

darren

Edited by jet_r31

Got an overlay to show results of before/after? Ignition changes only, or did you adjust fuelling too?

That's a significant amount of increased advance, hopefully should offer the same sort of torque increase offered on E85

  • 2 weeks later...

What kind of timing do you have after WM install ? I believe im +6 +4, some people tlak about 20.. so maybe I should ask my tuner to play more with timing ?

2) I have a CM7 injector from coolingmist installed in the intake, should I see a gain if I go direct port ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It can't be some stupidly proprietary video signal coming out of it that only Nissan's can understand. Surely you can just find some generic camera to stuff in there and use hot melt glue/blu-tac/gaffer tape to hold it in place if need be?
    • Update: Tunehouse looked into the problem and identified a wiring issue between the camera unit and the connector. They managed to get it working , but did warn me at some point it will stop working again. From their perspective it is unserviceable and will need replacement. They did some research and found that the new replacement camera would be Approx $1400 supply only (their fitting cost would be $190) . They did provide the part number (28442-JL05B) and a quick google of the part number shows that these are rather expensive brand new (seemingly no longer in manufacture) for the places that still have them in stock, with the used option potentially presenting  the same issue down the track at some unknown point. They are happy for me to supply the part so that they can fit it. Decisions, decisions... I can definitely recommend Tunehouse (thankyou Vee37!). Cost for the diagnosis was as quoted  ($190) , car was ready on time and communication was top notch. Their workshop is super clean and modern, and there was plenty of car candy parked out the front on the day I went.   Would definitely go back.   
    • to fix the voltage drop issue I swapped out the old 150amp alternator which turns out is a brand known for having issues and replaced it with the black 180amp alternator beside it 
    • For anyone interested, the Way Back Machine has that Japanese website archived with pictures, etc: https://web.archive.org/web/20051023225805fw_/http://www.a31cefiro.com/air_con.htm "Simply swapping the wiring of the harness will not allow it to function properly. For the outdoor air sensor and sunlight sensor, disconnect the wiring connected to CN1-11 of the air conditioning harness from the harness and connect the sensor side wiring to earth. For the indoor air sensor, disconnect the wiring connected to CN2-3 of the air conditioning harness from the harness and connect the sensor side wiring to earth. The connector PIN numbers listed here are the genuine A31 PIN numbers. To avoid incorrect wiring, check with a tester before wiring. Also, disconnect the wiring in a location close to the sensor. The disconnected harness side wiring will not be used, so be sure to insulate it." Wish someone sold a conversion harness to just plug-and-play a Kouki 180sx digital climate control into C33/A31. I'm decent with wiring but feeling kinda lazy about taking this on. Edit: Did some more digging and found a helpful Minkara blog post about the conversion as well: https://minkara.carview.co.jp/userid/1831116/car/1360568/2284209/note.aspx "After installation is complete or the battery is replaced, you need to go into self-diagnosis mode and set the internal air recirculation. The way to do it is to "hold OFF with the key on for more than 5 seconds, set the number to 5, then press 卍→C." ↑↑↑It probably won't make sense unless you actually try it (・∀・)." Lol wtf
    • Maybe SAUNSW could see howany members would do a motorkhana day if Schofield's is still available for a reasonable price...
×
×
  • Create New...