Jump to content
SAU Community

Recommended Posts

doh, i just bought 8000k for mine- very blue

Is that illegal or something?

Not overly fussed about visibility as its a city car in perth. It doesnt rain much n u could also drive with your headlights off half the time n not notice with the street lighting...

Thanks guys

I've done a bit of research into the topic. 4300k is the closest to daylight colour and after that they start going blue. Most OEM's use 4300k globes but the most popular aftermarket colour is 6000k.

The most contributing factor is the type of headlamp they go into. Cut glass lenses (the old school type) tend to throw the light around. This is because hid light output is very directional and refracts easily. The best lamps are the projector and free form designs. They control the light much better and give a defined cutoff. Important so your not blinding oncoming cars.

Cheers

4300K is light yellowish, 5000k close to white (will look slightly off if you have white LED parkers), 6000k is white, will match white LED parkers the best and probably the highest you'd want to go for looks vs. visability. Anything higher tends to blue/purple and will be worser off for visibility.

I have 6000k in my HR31 and now R32 and are absolutely awesome :). Just make sure they are not aimed too high and blind other road users. Also if you are going to use them in non-projector type headlights you should probably get a Hi/Lo type kit as you will blind people no matter where you aim them ;)

Edit: Added a pic of my conversion half done.

post-27061-0-01867800-1333590863_thumb.jpg

Edited by ColdFusion

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...