Jump to content
SAU Community

Recommended Posts

As stated above,

All 4 wheels are In EXCELLENT CONDITION only used a few months which is why they look new.

There is NO buckles / NO cracks on any of the 4 wheels.

These are a high quality cast alloy wheel manufactured to suit both road and racing conditions.

Manufactured and certified to JWL standards. Color: Shadow Silver

Front wheels measure: 18x8.5JJ +35

Rears wheels measure:18x9.5JJ +35

Fronts :2 x Regal Racer - 235/40/ZR18 Tyres. %90 tread left.

Rears :2 xDunlop Sport 9000 - 245/40/ZR18 Tyres. %75 tread left

Comes with all four centre caps. Personally I like the look without centre caps.

They looked awesome on the car, gives the car the jdm touch.

Asking : $950 for the set.Pick up from Taylorslakes, Western suburbs (Melbourne)

Call / SMS: 0422-756-270

Can post around Australia at buyers expense contact me for Quote.

Scroll down! I have taken heaps of pics below.

img0551el.jpg

img0554n.jpg

img0524zb.jpg

img0556sy.jpg

img0521hd.jpg

img0555b.jpg

img0561va.jpg

img0526xy.jpg

HOW THEY LOOK WITH THE CENTRE CAPS ON -

withcentrecaps.jpg

TYRES -

img0534el.jpg

tyre1t.jpg

tyre2.jpg

Found a pic on the net so you can see how these wheels look like on a car.

pc240007.jpg

Edited by G4orce

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok gotcha, so one post to fpr  another to bov  and I have the mishimoto boost controller and a link g4+ so I’d just have the tuner set it up properly. For the last two from plenum post throttle to  ecu/ boost controller, I know that I have a hose coming from the ecu that I was confused about so I assume that’s what connect to the boost controller from the ecu? And then the last is just from plenum to boost controller then to wastegate?
    • From there, it was just a quick electrical check, prime the oil and start her up Which, is not what happened. 1. Bloody seppo Aeropro battery holder. Not only was it too tall for the battery (which I'll forgive them for, I have another battery the same nominal size that is taller than Neil's one, but the bracket is a fixed height so the battery was spaced up) But the thing that really shits me is the hardware to hold it on requires a 7/32 Hex key. WTF. No-one will ever be able to remove or install the damn thing without a hex key they don't own 2. Kill switch no longer worked once the console was installed. Neil mentioned above he had to adjust the length but it no longer cleared the console once installed. Sorted. 3. Suspiciously, the brake light holders were hanging in the boot with no globes. Sure enough the stopper on the brake pedal was missing so they are always on unless the kill switch is activated. Will pick one up tomorrow (turns out 32 and 33 don't use the same stopper) 4. All that sorted, I turned on the kill switch, turned the key to ACC. Nothing. Turned it to IGN. Nothing. Checked some fuses and found the main IGN in the boot was missing which improved things once it was replaced. Now ECU and dash lights turn on with IGN but still no fuel pump. 5. Turned it to Start....ECU on, no fuel pump, no starter. Plus the voltage dropped straight to 9v.  I suspect the starter is f**ked but am going to have to work through it all and see what is happening, really looks like more than one issue. Does anyone have the R33 fuse box key with the circuit it sources from (eg BAT, ACC, IGN, SRT etc) and supplies? I can find a translated list showing Amps and circuit without supply circuit, and I can find supply circuit without Amps and target circuit.
    • 3rd time lucky, the AAC is now all plumbed up after getting some final fittings All set up under the plenum of maximum access
    • OK, so the weight has been bugging because it was really low. I did it again today and got a more believable answer at 1246 without driver And with a 93kg driver I'm pretty sure the car was still slightly on the quickjack last time meaning the full weight was not on the scales  
×
×
  • Create New...