Jump to content
SAU Community

Recommended Posts

Like Boostmeister says - use the layer mask.

Also use a soft brush. If the OEM ones aren't soft enough, you can 'tweak' them by using the side option menu from the brush-size dropdown (in PS 7)

Jamezilla, good point.

Hiroshima Screamer, if you have problems, send me the pics and I will do it for you [email protected]

PVA, you can do in in PS but its not just a insert and done type of program unlike the software that comes with cannon digi cams "Photostich".

Here's an example of photo joining in PS.

This is what 3 seperate photo's look like when joined, there was actually a fair bit of work in doing this. For those who don't know where it was taken....This is the view from 10 meters out in the water at 6am on a Sunday morning at Surfers Paradise. You have about ten minutes to take the shots you want before it gets too bright.

panasmall.jpg

Black and white is easy to do but there is B&W and there is B&W, I personally like "Black" not grey so you have to tweak the pic a bit. This is done in curves to a good effect.

First though just open a colour bit the go image>mode>greyscale to change it to black and white, just remember that you will not have all effect options available to you to use so mod the pic first THEN GO B&W

Just did it quickly, it all comes down to the images you start with. Make sure they are high res and try and take as many as possible, this is not always the case, it will depend on your camera.

Some cameras expose the shot well while others can make the sky totally different colours, this is when it is hard to blend....sometime I have to almost totally recreate the entire sky

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I agree on doing some better than factory pistons, rods, and oil pump. For anyone using the vehicle on the road, I don't get why everyone wants big cams. The stock cam profile, with some more lift would be mint for road usage. Everyone going big cams and then wondering why it isn't as responsive in traffic, when they've shifted the torque curve upwards an additional 1000RPM. Make torque, at lower RPM. Sure it's not as cool as claiming "500KW" and revving it to 8,0000RPM, but that same torque 2,000RPM earlier... Then you don't need the extremely high end pistons and rods, and blah blah blah.
    • Personal experience. Those f**kers burn. And are actually a PITA to put out. Next time I walk down the back, I'll snap a photo of what the inside of the bonnet looks like when that thing ignites. PS, powder fire extinguishers are useless on that stuff too as it's fibrous and when it ignites, it starts to pull apart. And you end up just blowing powder through a sieve effectively.   Like the big thing is, if it's fire resistant, it's job is to stop what burning? The METAL above it? It's just to try keep heat off the bonnet paint work.
    • Oh man, sorry, $60.00000000... 😛
    • That's more or less what he meant. What it really means is that you do not have to go full crazy on the build. Don't need the best oil pump, expensive rods & pistons, big cams, etc. You can upgrade whatever you want instead of using stock level items, but you don't have to. Having said that - any time an RB is opened up, if anything is getting replaced, I think the opportunity should be taken to do all the sensible upgrades. Pistons, rods, pump, etc.
    • February update 🙂 We managed to get the very last 1/18th "Extra Scale" cars stock available from bookstores in Kyoto. These are actually the last ones and will not be restocked again! Hachette Collections Japan have not decided on a release date for these or other models in the series, so for the time being these are all there are available new.  These are showing up on Yahoo auctions at inflated prices already (especially the Celica and NSX) so get yours now at a very reasonable price before they disappear! Stock quantities: NA1 Honda NSX - 1 left: https://www.oemsoko.co.jp/products/1-18-extra-scale-1990-na1-honda-nsx 1973 Toyota Celica LB 2000GT - 2 left: https://www.oemsoko.co.jp/products/1-18-extra-scale-1973-toyota-celica-lb-2000gt 1968 Mazda Cosmo Sport - 2 left: https://www.oemsoko.co.jp/products/1-18-extra-scale-1968-mazda-cosmo-sport 1970 KPGC10 Nissan Skyline 2000GT-R - 2 left: https://www.oemsoko.co.jp/products/1-18-extra-scale-1970-kpgc10-nissan-skyline-2000gt-r
×
×
  • Create New...