Jump to content
SAU Community

Recommended Posts

Hi,

PM sent - correct the ID's are actually EV'14's just flow matched by injector dynamics. Not sure about the milling though as I haven't heard of it.

- Brendan

  • Replies 191
  • Created
  • Last Reply

Top Posters In This Topic

Hi,

PM sent - correct the ID's are actually EV'14's just flow matched by injector dynamics. Not sure about the milling though as I haven't heard of it.

- Brendan

Can you please also PM me a price for the ID 1000cc injectors to suit an R34 GT-T, with the plugs. I'm looking for something that is pretty much drop in on the standard fuel rail.

Thanks

Justin

Can you please also PM me a price for the ID 1000cc injectors to suit an R34 GT-T, with the plugs. I'm looking for something that is pretty much drop in on the standard fuel rail.

Thanks

Justin

Hi,

These would not be a direct fit as they are universal injectors, but with extensions and plug's I can do 6x 1000cc EV14's for just $630 incl. delivery! These are readily used on the R34's so installation is no major issue if using an experienced workshop.

- Brendan

  • 4 weeks later...

Hi mate I'm looking for some E85 1000cc injectors to run in a BNR32 with 11mm HKS rail, SARD regulator & warlbro 450lph pump, cheers.

Hi mate I'm looking for some E85 1000cc injectors to run in a BNR32 with 11mm HKS rail, SARD regulator & warlbro 450lph pump, cheers.

Hi,

I would go with the BOSCH EV14's 1000cc top feed injectors. They are E85 compatible and come with extensions to suit 11mm o-ring.

Can do 6x with extensions and USCAR plug for $630 incl. delivery

- Brendan

  • 1 month later...

Hi

Chasing some prices on 700-800cc injectors for RB25 (Side Feed)

May be interested in going top feed if there is a good deal on a package however :)

Thanks

Hi,

The side feeds would be $150/injector so if you can go top feed that would save a lot of $$$!

Top feed BOSCH EV14's 1000cc are $640 incl. delivery for 6x which include the extensions and plugs.

- Brendan

Hi,

The side feeds would be $150/injector so if you can go top feed that would save a lot of $$$!

Top feed BOSCH EV14's 1000cc are $640 incl. delivery for 6x which include the extensions and plugs.

- Brendan

Hi Brendan

Thanks for that, so with the injectors, extensions and plugs they are pretty much plug and play (minus the rail of course) or do they need the resistor pack?

Thanks

Callan

Hi,

They are practically plug-and-play but you would need to contact a workshop to get specifics on what else may be required.

These have been widely used on the R33's so certainly no major task as all.

Also note these are the same injectors as used by injector dynamics!

- Brendan

  • 1 month later...

hi there I am after a set of injectors for 450kw gtr im thinking id2000? How much for 6 with the required adaptors to fit stock fuel rail and connectors I assume they are not plug and play and need some work from the tuner?

Scott

hi there I am after a set of injectors for 450kw gtr im thinking id2000? How much for 6 with the required adaptors to fit stock fuel rail and connectors I assume they are not plug and play and need some work from the tuner?

Scott

PM Sent :yes:




  • Latest Posts

    • Don't do it if your gearbox box has already having syncro issues. The short hifter will put a greater load on them. If you must I remember Nismo did a shorter shifter, with the top part being physically shorter and the part that went into the gearbox was the same as stock. In saying that I've had a C's short shifter (I think) in mine for many years, which was given to me as the previous owner was not sympathetic to the gearbox. Thus forwarned I was careful and had to modify my normal changing style. You have to be super accurate with your clutch and shifts
    • Well, after a week of daily driving and having to crawl out between the wheel and the side intrusion bars. I got myself a quick release setup. I went with an NRG short hub and Quick Release with some cute heart cutouts on the pull tabs. Nice and matchy matchy with the rest of the interior accents I have going on.  The only downside is the total stack height even with the short adapter is longer than the old HKB boss kit. Luckily I had some adjustment left on the column so move the wheel away.
    • stock shifter with new bushes, springs and cup will improve it. Gktech do all the bits. The opinion as the years have gone on is the redline is not great in old gearboxes.
    • Hi all   what short shifter do you use on your skykine r34?   my synchronous does have a problem and i was getting huge delay and grinding sound between 2nd and 3rd, did put shockproof red heavy stuff and it is great now/ no issues   would in your view short shifter screw this up?   people seems to suggest/ use cube short shifter and there is standard and premium. Seen review of premium as much better and less play. Thoughts?
    • Yeah, there's a bit of a density and friability difference between pebbles and any of those other things. Silicone will definitely float in oil and so will be mobile enough to move around. Although, again, if it is upstream of the filter it really shouldn't go any further. I would only ever worry about silicone when it is in places downstream of the filter. Upstream of the pickup is a whole 'nother matter. We've all seen what that does. I have seen the most abominable crap settled out in industrial gearboxes, trunnion lube systems and the like, without any sign that any of it has touched anything in the machine. Just chilling in the bottom, waiting for the inevitable operator error that causes the whole machine to need to be dismantled for repairs.
×
×
  • Create New...